ZTE-AN-BFD-STD-MIB

        Bidirectional Forwarding Management Information Base. 
This MIB is currently under the draft submitted by BT and Cisco, 
so the implement of current network management and network elements
are temporary. 
This draft is currently in Standard Track phase. When the formal 
standard to be released, network management and network elements
must re-implement in accordance with the official standards.
    
Source file
ZTE-AN-BFD-STD-MIB
Last revised
Identity
zxAnBfdStdMib
Base OID
1.3.6.1.4.1.3902.1015.16
Imported Objects
IF-MIB InterfaceIndexOrZero
INET-ADDRESS-MIB InetAddress InetAddressType InetPortNumber
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
ZTE-AN-TC-MIB zxAn
Net-SNMP examples using the zte MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZTE-AN-BFD-STD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZTE-AN-BFD-STD-MIB::zxAnBfdStdMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-BFD-STD-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-BFD-STD-MIB::zxAnBfdStdMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (78)
.1.3.6.1.4.1.3902.1015.16
.1.3.6.1.4.1.3902.1015.16.0
.1.3.6.1.4.1.3902.1015.16.1
.1.3.6.1.4.1.3902.1015.16.1.1
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.1.1
.1.3.6.1.4.1.3902.1015.16.1.1.2
.1.3.6.1.4.1.3902.1015.16.1.2
.1.3.6.1.4.1.3902.1015.16.1.2.1
.1.3.6.1.4.1.3902.1015.16.1.2.1.1
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.10
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.11
.1.3.6.1.4.1.3902.1015.16.1.2.1.12
.1.3.6.1.4.1.3902.1015.16.1.2.1.13
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.14
.1.3.6.1.4.1.3902.1015.16.1.2.1.15
.1.3.6.1.4.1.3902.1015.16.1.2.1.16
.1.3.6.1.4.1.3902.1015.16.1.2.1.17
.1.3.6.1.4.1.3902.1015.16.1.2.1.18
.1.3.6.1.4.1.3902.1015.16.1.2.1.19
Unsigned32
.1.3.6.1.4.1.3902.1015.16.1.2.1.2
.1.3.6.1.4.1.3902.1015.16.1.2.1.20
.1.3.6.1.4.1.3902.1015.16.1.2.1.21
Unsigned32
.1.3.6.1.4.1.3902.1015.16.1.2.1.22
.1.3.6.1.4.1.3902.1015.16.1.2.1.23
.1.3.6.1.4.1.3902.1015.16.1.2.1.24
.1.3.6.1.4.1.3902.1015.16.1.2.1.25
.1.3.6.1.4.1.3902.1015.16.1.2.1.26
.1.3.6.1.4.1.3902.1015.16.1.2.1.27
.1.3.6.1.4.1.3902.1015.16.1.2.1.28
.1.3.6.1.4.1.3902.1015.16.1.2.1.29
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.3
.1.3.6.1.4.1.3902.1015.16.1.2.1.30
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.31
Integer32
.1.3.6.1.4.1.3902.1015.16.1.2.1.32
OctetString
.1.3.6.1.4.1.3902.1015.16.1.2.1.33
.1.3.6.1.4.1.3902.1015.16.1.2.1.34
.1.3.6.1.4.1.3902.1015.16.1.2.1.35
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.36
Enumeration
.1.3.6.1.4.1.3902.1015.16.1.2.1.4
Unsigned32
.1.3.6.1.4.1.3902.1015.16.1.2.1.5
Unsigned32
.1.3.6.1.4.1.3902.1015.16.1.2.1.6
.1.3.6.1.4.1.3902.1015.16.1.2.1.60
.1.3.6.1.4.1.3902.1015.16.1.2.1.61
.1.3.6.1.4.1.3902.1015.16.1.2.1.7
.1.3.6.1.4.1.3902.1015.16.1.2.1.8
.1.3.6.1.4.1.3902.1015.16.1.2.1.9
.1.3.6.1.4.1.3902.1015.16.1.3
.1.3.6.1.4.1.3902.1015.16.1.3.1
.1.3.6.1.4.1.3902.1015.16.1.3.1.1
.1.3.6.1.4.1.3902.1015.16.1.3.1.10
.1.3.6.1.4.1.3902.1015.16.1.3.1.11
.1.3.6.1.4.1.3902.1015.16.1.3.1.12
.1.3.6.1.4.1.3902.1015.16.1.3.1.13
.1.3.6.1.4.1.3902.1015.16.1.3.1.14
.1.3.6.1.4.1.3902.1015.16.1.3.1.15
.1.3.6.1.4.1.3902.1015.16.1.3.1.16
.1.3.6.1.4.1.3902.1015.16.1.3.1.17
.1.3.6.1.4.1.3902.1015.16.1.3.1.18
.1.3.6.1.4.1.3902.1015.16.1.3.1.19
.1.3.6.1.4.1.3902.1015.16.1.3.1.2
.1.3.6.1.4.1.3902.1015.16.1.3.1.3
.1.3.6.1.4.1.3902.1015.16.1.3.1.4
.1.3.6.1.4.1.3902.1015.16.1.3.1.5
.1.3.6.1.4.1.3902.1015.16.1.3.1.6
.1.3.6.1.4.1.3902.1015.16.1.3.1.7
.1.3.6.1.4.1.3902.1015.16.1.3.1.8
.1.3.6.1.4.1.3902.1015.16.1.3.1.9
.1.3.6.1.4.1.3902.1015.16.1.4
.1.3.6.1.4.1.3902.1015.16.1.4.1
Unsigned32
.1.3.6.1.4.1.3902.1015.16.1.4.1.1
.1.3.6.1.4.1.3902.1015.16.1.4.1.2
.1.3.6.1.4.1.3902.1015.16.1.5
.1.3.6.1.4.1.3902.1015.16.1.5.1
.1.3.6.1.4.1.3902.1015.16.1.5.1.1
.1.3.6.1.4.1.3902.1015.16.1.5.1.2
.1.3.6.1.4.1.3902.1015.16.1.5.1.3
.1.3.6.1.4.1.3902.1015.16.1.5.1.4
.1.3.6.1.4.1.3902.1015.16.2
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
Enumeration
controlDetectionTimeExpired(1)
echoFunctionFailed(2)
neighborSignaledSessionDown(3)
forwardingPlaneReset(4)
pathDown(5)
concatenatedPathDown(6)
administrativelyDown(7)
reverseConcatenatedPathDown(8)
noDiagnostic(99)
Unsigned32 range: 0..4294967295
Unsigned32 range: 1..255
Unsigned32 range: 1..4294967295
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.3902.1015.16.0.1
This notification is generated when the
zxAnBfdStdSessState object for one or more contiguous
entries in zxAnBfdStdSessTable are about to enter the up(4)
state from some other state. The included values of
zxAnBfdStdSessDiag MUST both be set equal to this
new state (i.e: up(4)). The two instances of
zxAnBfdStdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For the
cases where a contiguous range of sessions
have transitioned into the up(4) state at roughly
the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single zxAnBfdStdSessEntry, then
the instance identifier (and values) of the two
zxAnBfdStdSessDiag objects MUST be the identical.
.1.3.6.1.4.1.3902.1015.16.0.2
This notification is generated when the
zxAnBfdStdSessState object for one or more contiguous
entries in zxAnBfdStdSessTable are about to enter the down(2)
or adminDown(1) states from some other state. The included
values of zxAnBfdStdSessDiag MUST both be set equal to this new
state (i.e: down(2) or adminDown(1)). The two instances
of zxAnBfdStdSessDiag in this notification indicate the range
of indexes that are affected. Note that all the indexes
of the two ends of the range can be derived from the
instance identifiers of these two objects. For
cases where a contiguous range of sessions
have transitioned into the down(2) or adminDown(1) states
at roughly the same time, the device SHOULD issue a single
notification for each range of contiguous indexes in
an effort to minimize the emission of a large number
of notifications. If a notification has to be
issued for just a single zxAnBfdStdSessEntry, then
the instance identifier (and values) of the two
zxAnBfdStdSessDiag objects MUST be the identical.