ZTE-AN-ADSL-LINE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
88

zxAnAdslLineTable

table
.1.3.6.1.4.1.3902.1015.1000.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslLineTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslLineTable' 
Adsl line additional information table.
zxAnAdslLineEntry row .1.3.6.1.4.1.3902.1015.1000.1.1.1
Adsl line additional information entry
Indexes
Column Syntax OID
zxAnAdslLineTxDataRate
Transmitted net data rate on this line.
kbpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.1.1.1
zxAnAdslLineRxDataRate
Recieved net data rate on this line.
kbpsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.1.1.2
zxAnAdslAtucActInp
Actual impulse noise protection.
This parameter reports the actual impulse noise
protection (INP) on the channel in the L0
state. In the L1 or L2 state, the parameter contains the
INP in the previous L0 state.
0.1 symbolsInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1000.1.1.1.3
zxAnAdslAturActInp
Actual impulse noise protection.
This parameter reports the actual impulse noise
protection (INP) on the channel in the L0
state. In the L1 or L2 state, the parameter contains the
INP in the previous L0 state.
0.1 symbolsInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1000.1.1.1.4
zxAnAdslLineExtConfPrf
The value of this object identifies the row in the XDSL2
Line Ext Profile Table, (zxAnXdsl2LnExtConfPrfTable),
which applies for this line.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.3902.1015.1000.1.1.1.5

zxAnAdslLineConfProfileExtTable

table
.1.3.6.1.4.1.3902.1015.1000.1.2 · 1 row entry · 19 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslLineConfProfileExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslLineConfProfileExtTable' 
Adsl line config profile extended information table.
zxAnAdslLineConfProfileExtEntry row .1.3.6.1.4.1.3902.1015.1000.1.2.1
An entry extends the adslLineConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line profile.
Indexes
No indexes recorded
Column Syntax OID
zxAnAdslLineConfTxStartBin
Specifies lowest bin number allowed for Tx signal.
Different line coding type has different default value.
0x20 (default for Annex A only)
0x20 (default for ADSL2/ADSL2plus)
0x06 (default for Annex A if G.Span …
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.1
zxAnAdslLineConfTxEndBin
Specifies highest bin number allowed for Tx signal.
Default = 0x3ff (default for all Annexes and ADSL2/ADSL2plus)
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.2
zxAnAdslLineConfRxStartBin
Specifies lowest bin number allowed for Rx signal.
Different line coding type has different default value.
0x06 (default for Annex A)
0x01 (default for Annex B)
0x06 (default for Annex C/C.x)
0x06 (default f…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.3
zxAnAdslLineConfRxEndBin
Specifies highest bin number allowed for Rx signal.
Default = 0x3f (default for all Annexes and ADSL2/ADLS2plus)
Integer32r/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.4
zxAnAdslLineConfUseCustomBins
Enable or disable custom bin selection for upstream/downstream
transmission. This parameter is used in conjunction with the
adslAtucDMTConfFreqBins and
adslAturDMTConfFreqBins[ADSL-DMT-LINE-MIB] parameter.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.5
zxAnAdslAtucConfPsdMaskType
It is supported by G.Span. Dsl card team will provide files
about it in details.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.6
zxAnAdslLineConfPMMode
This configuration parameter defines the line states the ATU-C
may autonomously transition to on this line. It is coded in a
bit map representation (0 if not allowed, 1 if allowed) with
following definition:
Bit 0…
Bitsr/w
Enumerated Values:
0idle
1lowPower
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.7
zxAnAdslLineConfPML2Rate
PM configuration parameter,related to the L2 low power state.
This parameter specifies the minimum net data rate during the
low power state (L2).
kbpsInteger32r/w
Constraints:
range: 256-1024
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.8
zxAnAdsl2ConfMinProtectionDs
Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not req…
symbolsEnumerationr/w
Enumerated Values:
0autoAdaption
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5fourSymbols
6eightSymbols
7sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.9
zxAnAdslLineConfMinProtectionUs
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols.
symbolsEnumerationr/w
Enumerated Values:
0autoAdaption
1noProtection
2halfSymbol
3singleSymbol
4twoSymbols
5fourSymbols
6eightSymbols
7sixteenSymbols
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.10
zxAnAdslConfDMTConfTrellis
Parameter that enable or disable trellis coding. Trellis coding
should always be enabled for its clear performance advantage.
Trellis coding is mandatory for ADSL/ADSL2plus.
The value enable(1) is default for all Annex…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.11
zxAnAdslAtucConfMaxBitsPerBin
Specifies maximum Rx number of bits per bin.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.12
zxAnAdslAtucConfBitSwapDs
enables/disables downstream bit swapping.
Different line coding type has different default value.
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
C.x, G.Span/ADSL+ and G.Span Plus)
en…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.13
zxAnAdslAtucConfBitSwapUs
enables/disables upstream bit swapping.
Different line coding type has different default value.
disable(2) (default for ADSL2/ADLS2plus, Annex B, Annex C
C.x, G.Span/ADSL+ and G.Span Plus)
enab…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.14
zxAnAdslAtucConfReAdsl2Enable
Defines whether downstream READSL2 operation should be forced
by the ATU-C.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.15
zxAnAdslAtucConfPmL0Time
PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an exit from
the L2 state and the next entry into the L2 state.
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.16
zxAnAdslAtucConfPmL2Time
PM configuration parameter,related to the L2 low power state.
This parameter represents the minimum time between an entry into
the L2 state and the first Power Trim in the L2 state and between
two consecutive Power Tri…
secondsInteger32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.17
zxAnAdslAtucConfPmL2Atpr
PM configuration parameter,related to the L2 low power state.
This parameter represents the Maximum Aggregate Transmit Power
Reduction (in dB) that can be performed through a single Power
Trim in the L2 state. It range…
dBInteger32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.18
zxAdsl2ConfPsdMaskSelectUs
The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in
adslLineTransAtucConfig of ADSL-LINE-EXT-MIB.
…
Enumerationr/w
Enumerated Values:
1adlu32Eu32
2adlu36Eu36
3adlu40Eu40
4adlu44Eu44
5adlu48Eu48
6adlu52Eu52
7adlu56Eu56
8adlu60Eu60
9adlu64Eu64
 .1.3.6.1.4.1.3902.1015.1000.1.2.1.19

zxAnAdslAtucChanTable

table
.1.3.6.1.4.1.3902.1015.1000.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAtucChanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAtucChanTable' 
This table provides one row for each Atuc channel.
zxAnAdslAtucChanEntry row .1.3.6.1.4.1.3902.1015.1000.1.3.1
Adsl channel layer line actuals information entry
Indexes
Column Syntax OID
zxAnAdslAtucChanInpEtr
GINP configuration parameters of downstream.
The expected throughput (ETR).
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.3.1.1
zxAnAdslAtucChanInpEftr
GINP configuration parameters of downstream.
The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits
originating from DTU's which have been detected to contain
n…
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.3.1.2
zxAnAdslAtucChanInpMinEftr
GINP configuration parameters of downstream.
The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min.
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.3.1.3
zxAnAdslAtucChanInpActDelay
GINP configuration parameters of downstream.
If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and bet…
msInteger32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1000.1.3.1.4

zxAnAdslAturChanTable

table
.1.3.6.1.4.1.3902.1015.1000.1.4 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAturChanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAturChanTable' 
This table provides one row for each ATUR channel.
zxAnAdslAturChanEntry row .1.3.6.1.4.1.3902.1015.1000.1.4.1
Adsl channel layer line actuals information entry
Indexes
Column Syntax OID
zxAnAdslAturChanInpEtr
GINP configuration parameters of upstream.
The expected throughput (ETR).
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.4.1.1
zxAnAdslAturChanInpEftr
GINP configuration parameters of upstream..
The error-free throughput (EFTR is defined as the average
bit-rate at the alpha1/beta1 reference point, of bits
originating from DTU's which have been detected to contain
no…
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.4.1.2
zxAnAdslAturChanInpMinEftr
GINP configuration parameters of upstream.
The minimum error-free throughput (EFTR_min is defined as the
minimum of the EFTR observed since the last reading of the
EFTR_min.
kbpsUnsigned32
Constraints:
range: 0-52000
 .1.3.6.1.4.1.3902.1015.1000.1.4.1.3
zxAnAdslAturChanInpActDelay
GINP configuration parameters of upstream.
If retransmission is used in a given transmit direction, this
Object is defined as the actual value of the time-independent
component of the delay between the alfa1 and beta1…
msInteger32
Constraints:
range: 0-63
 .1.3.6.1.4.1.3902.1015.1000.1.4.1.4

zxAnAdslLineAlarmConfProfileExtTable

table
.1.3.6.1.4.1.3902.1015.1000.1.20 · 1 row entry · 11 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslLineAlarmConfProfileExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslLineAlarmConfProfileExtTable' 
Adsl line alarm config profile extended information table.
The cycle of thresholds monitoring shoul be less than 5 minutes.
zxAnAdslLineAlarmConfProfileExtEntry row .1.3.6.1.4.1.3902.1015.1000.1.20.1
An entry extends the adslLineAlarmConfProfileEntry defined in
[RFC2662]. Each entry corresponds to an ADSL line alarm profile.
Indexes
No indexes recorded
Column Syntax OID
zxAnAdslAtucConnRateTolerance
Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate.

Calculation:

100*(adslAtucChanConfInterleaveMaxTxRate - adslAtucChanCurrTxR…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.1
zxAnAdslAturConnRateTolerance
Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate.

Calculation:

100*(adslAturChanConfInterleaveMaxTxRate - adslAturChanCurrTxR…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.2
zxAnAdslAtucThreshConnRate
Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is lower than zxAnAdslAtucThreshConnRate,
zxAnAdslAtucLowConnRateTrap trap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.3
zxAnAdslAturThreshConnRate
Threshold of Atur connection rate.
If adslAturChanCurrTxRate is lower than zxAnAdslAturThreshConnRate,
zxAnAdslAturLowConnRateTrap trap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.4
zxAnAdslMaxAtucConnRateTolerance
Tolerance between configured adslAtucChanConfInterleaveMaxTxRate and
actual adslAtucChanCurrTxRate.

Calculation:

100*(adslAtucChanCurrTxRate - adslAtucChanConfInterleaveMaxTxR…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.5
zxAnAdslMaxAturConnRateTolerance
Tolerance between configured adslAturChanConfInterleaveMaxTxRate and
actual adslAturChanCurrTxRate.

Calculation:

100*(adslAturChanCurrTxRate - adslAturChanConfInterleaveMaxTxR…
%Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.6
zxAnAdslMaxThreshAtucConnRate
Threshold of Atuc connection rate.
If adslAtucChanCurrTxRate is higher than zxAnAdslMaxThreshAtucConnRate,
zxAnAdslAtucHighConnRateTrap trap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.7
zxAnAdslMaxThreshAturConnRate
Threshold of Atur connection rate.
If adslAturChanCurrTxRate is higher than zxAnAdslMaxThreshAturConnRate,
zxAnAdslAturHighConnRateTrap trap will be sent.
A value of `0' will disable the trap.
kbpsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.8
zxAnAdslAturInitFailTrapEnable
Enables and disables the InitFailureTrap on the atur interface.

unused1 (0) - This bit is no use to enable or
disable the the InitFailureTrap
…
Bitsr/w
Enumerated Values:
0unused1
1lossOfFraming
2lossOfSignal
3lossOfPower
4unused2
5lossOfSignalQuality
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.9
zxAnAdslThreshAtucInpLeftr
GINP configuration parameters of downstream.
The fraction of NDR that shall be used as the threshold for
leftr defects.
lefter (The low error-free throughput rate) defect is defined as:
A leftr defect occuurs when EF…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.10
zxAnAdslThreshAturInpLeftr
GINP configuration parameters of upstream.
The fraction of NDR that shall be used as the threshold for
leftr defects.
lefter (The low error-free throughput rate) defect is defined as:
A leftr defect occuurs when EFTR…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.3902.1015.1000.1.20.1.11

zxAnAdslAtucPerfDataTable

table
.1.3.6.1.4.1.3902.1015.1000.1.21 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAtucPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAtucPerfDataTable' 
This table provides atuc performance.
zxAnAdslAtucPerfDataEntry row .1.3.6.1.4.1.3902.1015.1000.1.21.1
the entry for atuc channel performance.
Indexes
Column Syntax OID
zxAnAdslAtucPerfDataFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.21.1.1
zxAnAdslAtucPerfDataCurr15Fecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the current 15 minute time interval.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.21.1.2
zxAnAdslAtucPerfDataCurr1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the current 1 day interval.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.21.1.3
zxAnAdslAtucPerfDataPrev1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the most recent previous 1-day period.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.21.1.4

zxAnAdslAturPerfDataTable

table
.1.3.6.1.4.1.3902.1015.1000.1.22 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAturPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAturPerfDataTable' 
This table provides atur performance.
zxAnAdslAturPerfDataEntry row .1.3.6.1.4.1.3902.1015.1000.1.22.1
the entry for atur performance.
Indexes
Column Syntax OID
zxAnAdslAturPerfDataFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.22.1.1
zxAnAdslAturPerfDataCurr15Fecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the current 15 minute time interval.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.22.1.2
zxAnAdslAturPerfDataCurr1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the current 1 day interval.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.22.1.3
zxAnAdslAturPerfDataPrev1DayFecs
Count of seconds during this interval that there was at
least one FEC correction event on this channel
in this line within the most recent previous 1-day period.
secondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.22.1.4

zxAnAdslAtucChanPerfDataTable

table
.1.3.6.1.4.1.3902.1015.1000.1.23 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAtucChanPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAtucChanPerfDataTable' 
This table provides atuc channel performance.
zxAnAdslAtucChanPerfDataEntry row .1.3.6.1.4.1.3902.1015.1000.1.23.1
the entry for atuc channel performance.
Indexes
Column Syntax OID
zxAnAtucChanPerfCurr15RtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current 15 minute
interval. Multiple retransmission of the same DTU is counted
as m…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.1
zxAnAtucChanPerfCurr15RtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current 15 minute interval
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.2
zxAnAtucChanPerfCurr15RtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission in the
current 15 minute interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.3
zxAnAtucChanPerfCurr1DRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current day interval.
Multiple retransmission of the same DTU is counted as many ti…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.4
zxAnAtucChanPerfCurr1DRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current day interval
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.5
zxAnAtucChanPerfCurr1DRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.23.1.6

zxAnAdslAturChanPerfDataTable

table
.1.3.6.1.4.1.3902.1015.1000.1.24 · 1 row entry · 6 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAturChanPerfDataTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAturChanPerfDataTable' 
This table provides atur channel performance.
zxAnAdslAturChanPerfDataEntry row .1.3.6.1.4.1.3902.1015.1000.1.24.1
the entry for atur channel performance.
Indexes
Column Syntax OID
zxAnAturChanPerfCurr15RtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current 15 minute
interval. Multiple retransmission of the same DTU is counted
as m…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.1
zxAnAturChanPerfCurr15RtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current 15 minute interval
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.2
zxAnAturChanPerfCurr15RtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission in the
current 15 minute interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.3
zxAnAturChanPerfCurr1DRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter in the current day interval.
Multiple retransmission of the same DTU is counted as many ti…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.4
zxAnAturChanPerfCurr1DRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission in the current day interval
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.5
zxAnAturChanPerfCurr1DRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.24.1.6

zxAnAdslAtucChanIntervalTable

table
.1.3.6.1.4.1.3902.1015.1000.1.25 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAtucChanIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAtucChanIntervalTable' 
The table zxAnAdslAtucChanIntervalTable contains history 
Performance Monitoring results for 15min of DSL channel.
zxAnAdslAtucChanIntervalEntry row .1.3.6.1.4.1.3902.1015.1000.1.25.1
The table zxAnAdslAtucChanIntervalTable contains history
Performance Monitoring results for 15min of DSL channel.
Indexes
No indexes recorded
Column Syntax OID
zxAnAdslAtucChanIntervalRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.25.1.1
zxAnAdslAtucChanIntervalRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.25.1.2
zxAnAdslAtucChanIntervalRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission. during
this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.25.1.3

zxAnAdslAturChanIntervalTable

table
.1.3.6.1.4.1.3902.1015.1000.1.26 · 1 row entry · 3 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAturChanIntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAturChanIntervalTable' 
The table zxAnAdslAturChanIntervalTable contains history 
Performance Monitoring results for 15min of DSL channel.
zxAnAdslAturChanIntervalEntry row .1.3.6.1.4.1.3902.1015.1000.1.26.1
The table zxAnAdslAturChanIntervalTable contains history
Performance Monitoring results for 15min of DSL channel.
Indexes
No indexes recorded
Column Syntax OID
zxAnAdslAturChanIntervalRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.26.1.1
zxAnAdslAturChanIntervalRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.26.1.2
zxAnAdslAturChanIntervalRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission. during
this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.26.1.3

zxAnAdslAtucChanHist1DayTable

table
.1.3.6.1.4.1.3902.1015.1000.1.27 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAtucChanHist1DayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAtucChanHist1DayTable' 
The table zxAnAdslAtucChanHist1DayTable contains channel history
for 1 day intervals of DSL.
zxAnAdslAtucChanHist1DayEntry row .1.3.6.1.4.1.3902.1015.1000.1.27.1
The table zxAnAdslAtucChanHist1DayTable contains PM channel
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
Indexes
Column Syntax OID
zxAnAdslAtucChanHist1DayNumber
The interval number.
Integer32
Constraints:
range: 1-30
 .1.3.6.1.4.1.3902.1015.1000.1.27.1.1
zxAnAdslAtucChanHist1DayRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.27.1.2
zxAnAdslAtucChanHist1DayRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.27.1.3
zxAnAdslAtucChanHist1DayRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission during
this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.27.1.4

zxAnAdslAturChanHist1DayTable

table
.1.3.6.1.4.1.3902.1015.1000.1.28 · 1 row entry · 4 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnAdslAturChanHist1DayTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnAdslAturChanHist1DayTable' 
The table zxAnAdslAturChanHist1DayTable contains channel history
for 1 day intervals of DSL.
zxAnAdslAturChanHist1DayEntry row .1.3.6.1.4.1.3902.1015.1000.1.28.1
The table zxAnAdslAturChanHist1DayTable contains PM channel
history for 1 day intervals of DSL.
The indexes of this table is an interface index where
the interface has an ifType value which is applicable
for a DSL chan…
Indexes
Column Syntax OID
zxAnAdslAturChanHist1DayNumber
The interval number.
Integer32
Constraints:
range: 1-30
 .1.3.6.1.4.1.3902.1015.1000.1.28.1.1
zxAnAdslAturChanHist1DayRtxDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
retransmitted by the transmitter during this interval. Multiple
retransmission of the same DTU is counted as many times as i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.28.1.2
zxAnAdslAturChanHist1DayRtxCDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU has been
detected in error and has been successfully corrected by a
retransmission during this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.28.1.3
zxAnAdslAturChanHist1DayRtxUcDtu
GINP configuration parameters.
this is a counter that is incremented each time a DTU is detected
in error and has not been corrected by a retransmission during
this interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3902.1015.1000.1.28.1.4

zxAnDslLoopBackTestTable

table
.1.3.6.1.4.1.3902.1015.1000.1.30 · 1 row entry · 11 columns
Open in standard view
Uses the zte variant from /opt/observium/mibs/zte.
Command help
Walk zxAnDslLoopBackTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZTE-AN-ADSL-LINE-MIB' -M '/opt/observium/mibs/zte:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZTE-AN-ADSL-LINE-MIB::zxAnDslLoopBackTestTable' 
This table provides one row for each DSL line loopback test.
zxAnDslLoopBackTestEntry row .1.3.6.1.4.1.3902.1015.1000.1.30.1
DSL line loopback test information entry
Indexes
Column Syntax OID
zxAnDslLoopBackTestRack
Rack number of the dsl port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.1
zxAnDslLoopBackTestShelf
Shelf number of the dsl port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.2
zxAnDslLoopBackTestSlot
Slot number of the dsl port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.3
zxAnDslLoopBackTestPort
The dsl port number.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.4
zxAnDslLoopBackTestBridgePort
Dsl bridge port index. eg.It is PVC ID in ADSL port.
If the test is only in the physical port,then this fileds will be 0
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.5
zxAnDslLoopBackTestType
This is loop test action expected.

NOTES:
Enumerationr/w
Enumerated Values:
0noOper
1cancle
2utopia
3afe
4hybrid
5xTUC_OAM
6xTUR_OAM
7xTUR_CC
8digital
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.6
zxAnDslLoopBackTestOperStatus
This is loop test operational status.

Note: if zxAnDslLoopBackTestOperStatus equal to Excuting(1),
ifOperStaus should be loopback test(3).
Enumeration
Enumerated Values:
0neverExcute
1excuting
2excuted
3faliedToCommit
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.7
zxAnDslLoopBackTestResult
This is loop test result and includes reasons for test failures.
Enumeration
Enumerated Values:
0noResult
1success
2generalFailed
3noSupport
4unkown
5noSuchPort
6loopBackFailed
7portNotActive
8portInTesting
9portInService
10portFailures
11cardFailures
12noPvcFound
13unknownTestType
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.8
zxAnDslLoopBackTestConfSendCells
The count of cells will be sent in the loopback test.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.9
zxAnDslLoopBackTestResultRecivedCells
The count of recived cells in the loopback test.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.10
zxAnDslLoopBackTestRowStatus
Loop test table RowStatus .
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.3902.1015.1000.1.30.1.15