ZHONE-PHY-WTN-RADIO-MIB Table View

Radio, modem and ODU configuration information.  An entry 
is automatically created for each radio/modem/ODU 
interface.

wtnConfigEntry row .1.3.6.1.4.1.5504.5.8.1.1

Configuration entries

Indexes

wtnRadioIfIndex

Column	Syntax	OID
wtnRadioIfIndex This object should be made equal to the Ifindex used for the radio interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.5504.5.8.1.1.1
wtnActiveChannelNumber Assigns one of N allowed frequency pairs for the radio transmitter and reciever as described in zhoneRadio-TC.mib. 5.7Ghz family (sysObjId) systems: --------------------------------- Writing to this valu…	ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumberr/w	.1.3.6.1.4.1.5504.5.8.1.1.2
wtnActiveTransmitFrequency Current transmit frequency. As described in zhoneRadio-TC.mib. 23Ghz family: ( according to sysObjId ) ------------------------------------------- The transmit frequency is entered as a…	HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.1.1.3
wtnStandbyChannelNumber Assigns one of N allowed standby frequency pairs to the radio transmitter and reciever as described in zhoneRadio-TC.mib. 5.7Ghz family (sysObjId) systems: --------------------------------- Selection of …	ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumberr/w	.1.3.6.1.4.1.5504.5.8.1.1.4
wtnStandbyTransmitFrequency Standby Transmit frequency as described in zhoneRadio-TC.mib. 23Ghz family: ( according to sysObjId ) ------------------------------------------- If auto-switching is enabled, the frequ…	HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.1.1.5
wtnAutoChannelSwitchEnable true(1) - allows radio to automatically switch to the standby channel in case of active channel interference. false(2) - inhibits radio from automatically switching to the standby channel. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.8.1.1.6
wtnChannelSeparation 23Ghz family (sysObjId) systems: --------------------------------- Channel separation - the fixed difference between transmit and receive frequency. Only three values are allowed: s1232MHz(1), s1200MHz, …	Enumerationr/w Enumerated Values: 0 na 1 s1232MHz 2 s1200MHz 3 s1008MHz	.1.3.6.1.4.1.5504.5.8.1.1.7
wtnRadioAmplifiersEnable true(1) - Enables amplifiers for transmitter and receiver. The radio will begin transmitting and receiving data. If the ODU is looped back, unable to lock onto a signal, or the ODU equipment has failed, the enable com…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.8.1.1.8
wtnRxBERThresh Set point of BER alarm. When the modem BER estimate is higher than this value, a modem BER alarm will occur. The BER over threshold Causes trap wtnBerAlarm to be emitted. The alarm will stay present until the modem BER…	ZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.1.1.9
wtnRxBERHysteresisWindow After a wtnBerAlarm trap is sent, it is revoked using the same trap with the condition flag set to false when the modem BER estimate is lower than the set point wtnModemRxBERThresh less this value. Valid…	ZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.1.1.10
wtnAntennaSize Initial power of transmitter is based upon antenna diameter. oneFoot(1) - a one foot dish twoFeet(2) - a two foot dish fourFeet(4) - a four foot dish sixFeet(6) - a six foot dish FCC mandat…	feetEnumerationr/w Enumerated Values: 1 oneFoot 2 twoFeet 4 fourFeet 6 sixFeet	.1.3.6.1.4.1.5504.5.8.1.1.11
wtnIduOduCableLength The length of the coaxial cable between the Indoor Unit and the Outdoor Unit. Used internally to compensate for the coaxial cable's natural attenuation of the signal. This cable is cut to i…	feetInteger32r/w Constraints: range: 0-300	.1.3.6.1.4.1.5504.5.8.1.1.12
wtnRssiThresh Set point of RSSI thresholdalarm. When the ODU RSSI estimate is lower than this value, a wtnRssiDeviation trap will be emitted. When the ODU RSSI estimate is higher than this set point plus the hysteresis window wtnOd…	dBInteger32r/w Constraints: range: -99--30	.1.3.6.1.4.1.5504.5.8.1.1.13
wtnRssiHysteresisWindow After a wtnRssiDeviation Trap is sent, an the trap is re-emitted with the condition flag set to false when the ODU RSSI estimate is higher than the set point wtnOduRxRSSIThresh plus this value. Typical v…	dBSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.8.1.1.14
wtnTrapsEnable When true(1), radio traps may be emitted. When false(2), radio traps will be absorbed. Default value is true(1) = enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.5.8.1.1.15
wtnOduLoopback loopbackOn(1) - engages the loopback function at the ODU (outdoor unit). Data normally transmitted by the radio is instead returned to the IDU (indoor unit). This is useful to check the integrity of the IDU, the integr…	Enumerationr/w Enumerated Values: 1 loopbackOn 2 loopbackOff	.1.3.6.1.4.1.5504.5.8.1.1.16
wtnOduIdentifier Textual description of ODU. This string typically identifies the location of antenna.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.5504.5.8.1.1.17
wtnTxLevel Desired transmitter signal strength (TSSI) at antenna. Note: Accuracy decreases as power levels decrease below 20dBm. FCC maximum power allowed is +30dBm.	dBInteger32r/w Constraints: range: 0-45	.1.3.6.1.4.1.5504.5.8.1.1.18

Contains the status of the Radio, ODU and Modem.

wtnStatusEntry row .1.3.6.1.4.1.5504.5.8.2.1

Entries for radio, ODU and modem status.

Indexes

No indexes recorded

Column	Syntax	OID
wtnCriticalAlarmStatus Current radio alarm status details. BIT Hex Decimal BIT NAME Number Value Value ------ ------ ------- ---------------------- 0 0x01 1 RSSI_DEVIATION 1 0…	Bits Enumerated Values: 0 rssiDeviation 1 iduOOL 2 oduTempAlert 3 rxBerAlarm 4 rxEbnoAlarm 5 unused5 6 unused6 7 unused7 8 iduEquipFail 9 oduEquipFail 10 iduOduLinkFail 11 mcChannelFail 12 unused12 13 unused13 14 unused14 15 serviceAffected	.1.3.6.1.4.1.5504.5.8.2.1.1
wtnCriticalAlarmStatusLastChange Time Stamp of last change of critical alarm status wtnRadioCriticalAlmStatus.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.5504.5.8.2.1.2
wtnMinorAlarmStatus Current radio alarm status details. BIT Hex Decimal BIT NAME Number Value Value ------ ------ ------- ---------------------- 0 0x01 1 RSSI_DEVIATION 1 0x02 2 …	Bits Enumerated Values: 0 rssiDeviation 1 iduOOL 2 oduTempAlert 3 rxBerAlarm 4 rxEbnoAlarm 5 unused5 6 unused6 7 unused7 8 iduEquipFail 9 oduEquipFail 10 iduOduLinkFail 11 mcChannelFail 12 unused12 13 unused13 14 unused14 15 serviceAffected	.1.3.6.1.4.1.5504.5.8.2.1.3
wtnMinorAlarmStatusLastChange Time Stamp of last change of minor alarm status wtnRadioMinorAlmStatus.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.5504.5.8.2.1.4
wtnOduTemperature Current temperature measured at local outdoor unit, in degrees Celsius (Centigrade).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.5.8.2.1.5
wtnReceiveFrequency Current frequency at which radio receiver is set.	HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotation Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.2.1.6

Table augments the wtnConfigTable

wtnInfoEntry row .1.3.6.1.4.1.5504.5.8.3.1

Device information entries for the radio, modem and ODU.

Indexes

No indexes recorded

Column	Syntax	OID
wtnOduSerialNumber Manufacturing Serial Number for Outdoor Unit. Format of the serial number is XXXXX, where X = 0 to F.	Zhone-TCZhoneAdminString Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.3.1.1
wtnOduMfgCLEICode CLEI code for Outdoor Unit.	Zhone-TCZhoneAdminString Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.3.1.2

Table to collect statistics at radio demodulator of 
wireless transport node.

wtnSnapshotEntry row .1.3.6.1.4.1.5504.5.8.4.1

Entry into wireless transport local radio status table.
No rows may be added to this table.

Indexes

No indexes recorded

Column	Syntax	OID
wtnRSSI Current Received Signal Strength in dB as registered at the near end Outdoor Unit. This number is updated about once per second. Typical values range from -95dB to -30dB. Tyipcal nominal value is -60dB.	dBmInteger32 Constraints: range: -90-0	.1.3.6.1.4.1.5504.5.8.4.1.1
wtnTSSI Estimated transmitter signal strength (TSSI) at antenna. Note: maximum level allowed by FCC is 30dBm.	dBmInteger32 Constraints: range: 0-45	.1.3.6.1.4.1.5504.5.8.4.1.2
wtnRxBerFloat Current received BER at local Indoor Unit demodulator over the previous 250ms.	ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.4.1.3
wtnRcvEbNoFloat Current local demodulator (rcvd) Energy-bit per noise. Conveys energy in each bit as compared to energy in noise.	ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.5.8.4.1.4

Table of current statistics in the style of rfc2493 current table.

radioTotalEntry row .1.3.6.1.4.1.5504.5.8.6.1

Set of basic statistics for radio interface.

Indexes

No indexes recorded

Column	Syntax	OID
radioTotalES Number of seconds the radio link detected bit errors since the system has been up, or since last reset. If the BER is above the user set threshhold then the readioCurrentSES count will be incremented…	SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.8.6.1.1
radioTotalSES Count of the number of seconds the radio endured severe conditions since system came up or value was reset. A severe condition occurs if: 1 - received BER is greater exceeds the BER threshold and has n…	SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.8.6.1.2
radioTotalUAS Unavailable seconds. This value is incremented once per second after ten consecutive radioCurrentSES (severe-error seconds) are counted. An equipment failure will also increment this value. Writing any…	SNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.5.8.6.1.3