ZHONE-PHY-SONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
17
.1.3.6.1.4.1.5504.5.9.1 · 1 row entry · 2 columns
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk sonetClockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-PHY-SONET-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-PHY-SONET-MIB::sonetClockTable'
MIB table for clock related configuration for SONET interfaces.
sonetClockEntry row .1.3.6.1.4.1.5504.5.9.1.1
An entry of the sonetClockEntry.

sonetClockEntry is augmented to sonetMediumEntry defined
in rfc2558.mib. Whenever a row is instantiated in the
sonetMediumTable, a corresponding row will be
instantiated in…
Indexes
No indexes recorded
Column Syntax OID
This variable indicates if external clock recovery is enabled
for this SONET interface.

The default value is 'enabled'.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.5504.5.9.1.1.1
This variable describes the SONET transmit clock source.
Valid values are:

loopTiming - transmit clock synthesized from the recovered
receive clock.
throughTiming - transmit clock is derived from the reco…
Enumerationr/w
Enumerated Values:
1loopTiming
2throughTiming
3localTiming
4external155MHz
.1.3.6.1.4.1.5504.5.9.1.1.2
.1.3.6.1.4.1.5504.5.9.2 · 1 row entry · 2 columns
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk sonetMediumExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-PHY-SONET-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-PHY-SONET-MIB::sonetMediumExtTable'
This is an extenion of the standard Sonet MIB (RFC 2558).
sonetMediumExtEntry row .1.3.6.1.4.1.5504.5.9.2.1
Each row is an extension to the sonetMediumTable for Zhone
specific fields. This row is created when the augmented
sonetMediumEntry is created.
Indexes
No indexes recorded
Column Syntax OID
This field describes the enabled status of the Sonet Scramble mode. If this
field is true(1) then Scramble mode is enabled, if this field is
false(2) scramble mode is disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.5504.5.9.2.1.1
This field describes the enabled status of the Line level
Sonet Scramble mode. If this field is true(1), then
Scramble mode is enabled. If this field is false(2),
scramble mode is disable.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.5504.5.9.2.1.2
.1.3.6.1.4.1.5504.5.9.6 · 1 row entry · 13 columns
Uses the zhone variant from /opt/observium/mibs/zhone.
Command help
Walk zhoneSonetErrorStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-PHY-SONET-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-PHY-SONET-MIB::zhoneSonetErrorStatsTable'
Description.
zhoneSonetErrorStatsEntry row .1.3.6.1.4.1.5504.5.9.6.1
Description.
Column Syntax OID
Description.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.5504.5.9.6.1.1
Number of RLOP far-end block errors (FEBE).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.2
Number of RPOP far-end block errors (FEBE).
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.3
Number of Receive Line Overhead Processor (RLOP) BIP-8
errors. The RLOP is responsible for line-level alarms
and for monitoring performance.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.4
Number of Receive Section Overhead Processor (RSOP)
bit-interleaved parity (BIP)-8 errors. The RSOP
synchronizes and descrambles frames and provides
section-level alarms and performance monitoring.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.5
Number of Receive Path Overhead Processor (RPOP) BIP-8
errors. The RSOP interprets pointers and extracts path
overhead and the synchronous payload envelope. It is
also responsible for path-level alarms and for
monit…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.6
Near end is out of frame. False indicates that the line
is up and in frame.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.7
Receive ATM Cell Processor (RACP) receive cell count.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.8
Transmit ATM Cell Processor (TACP) transmit cell count.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.9
Number of corrected HEC cells.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.10
Number of uncorrected dropped HEC cells.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.11
Number of cells dropped because of first in, first out
(FIFO) overflow.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.12
Loss of cell delineation.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.5504.5.9.6.1.13