ZHONE-INTERFACE-TRANSLATION-MIB Table View

Table to translate from interface number (zhoneIfIndex)
to the physical location and port (including subport
where defined).
          
zhoneShelfNumber is the number of the shelf on which the
port is located and can have a value from 1-255, 
          
zhoneSlotNumber is the card slot on which card with the
physical port is located and currently has a value of
1-18.
          
The pportNumber identifies the specific physical
port on the card beginning with port 1.
          
subPortNumber issued to define multiple interfaces on
a port as required, if the identified port has a single
interface number, subport will be set to zero.

This table defines the default ifTable vales and
stack arrangements (bindings) and unit numbers based on
types of cards and ifTypes.

This is the inverse ifstacktable in that the index
scheme is lower.higher as opposed to higher.lower as
defined in rfc2233. Comments and information is 
copied here for clarity.
          
Information on a particular relationship between two
sub-layers, specifying that one sub-layer runs on
'top' of the other sub-layer.  Each sub-layer
corresponds to a conceptual row in the ifTable.
          
Use of this table is solely for management stations
to walk the table (getnext) from the lower
physical port (ifindex) up the stack.

This table contains additional objects for the interface table.
Each row corresponds to a conceptual row in the ifTable.

Table to translate from shelf/slot/physical port/subport/
iftype/iftype-extension to the interface number 
(zhonePhysicalIfIndex).  The physical port is the port number 
on the card selected by shelf/slot.  The role of subport may 
vary depending on the card type, but is included to allow 
maximum flexibility and future exhancements.  Iftype-extension
is searched when iftype is set to 'ZHONEIFTYPE_NONE(0)'.

Table of description entries.

Line redundancy information