ZHONE-COM-VOICE-DSP-MIB Table View

Current status information for the voice DSP
application. This table gives a current view of how a
voice DSP is doing since the voice DSP is started.

voiceDspStatusEntry row .1.3.6.1.4.1.5504.4.3.3.2.1

An entry in the voiceDspStatusTable.

Indexes

ZhonezhoneShelfIndex ZhonezhoneSlotIndex

Column	Syntax	OID
voiceDspMaxChannelOnBoard Maximum number of channels a voice DSP can handle at the present time. The valid range for DSP boards we currently support is 0 to 1008.	Unsigned32 Constraints: range: 0-1008	.1.3.6.1.4.1.5504.4.3.3.2.1.1
voiceDspActiveChannelCount Number of channels currently active. The maximum value of this variable should not exceed voiceDspMaxChannelOnBoard.	Unsigned32 Constraints: range: 0-1008	.1.3.6.1.4.1.5504.4.3.3.2.1.2
voiceDspHiWaterChannelCount The highest channel count since this voice DSP has been running. The maximum value of this variable should not exceed voiceDspMaxChannelOnBoard.	Unsigned32 Constraints: range: 0-1008	.1.3.6.1.4.1.5504.4.3.3.2.1.3
voiceDspResetCount Number of slave DSP resets that have occurred within a voice DSP. A reset occurs when a slave DSP crashes. This counter is incremented each time voice DSP detects a slave DSP crash.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.2.1.4

This table gives a detailed snapshot view of all the 
voice calls the voice DSP is currently processing. 
Only the current active calls are reported in this 
table and there is no information about call sessions
that are already terminated.

channelStatusEntry row .1.3.6.1.4.1.5504.4.3.3.3.1

An entry in the channelStatusTable.

Indexes

ZhonezhoneShelfIndex ZhonezhoneSlotIndex channelId

Column	Syntax	OID
channelId Logical channel id of a call. The valid range of this id is from 1 to 65536. At any single instance, there should at most one call with the same channel id but over time the same channel id can be used for different cal…	Integer32 Constraints: range: 1-65536	.1.3.6.1.4.1.5504.4.3.3.3.1.1
channelVoiceSessionIdHigh The high 32 bits of the session number of a voice call. The session id is used to keep track all resources used by a call. Detailed call performance statistics can be supported in the future with session …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.2
channelVoiceSessionIdLow The low 32 bits of the session number of a voice call. The session id is used to keep track all resources used by a call. Detailed call performance statistics can be supported in the future with session i…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.3
channelCcrpShelf The shelf where the Call Control Resource Provider (CCRP) resides. CCRP process acts as a gateway for call signaling between TDM equipment and the ATM AAL2 network. Range of valid values is 1-255. Note …	Zhone-TCZhoneShelfValue Type Constraints: range: 1..255	.1.3.6.1.4.1.5504.4.3.3.3.1.4
channelCcrpSlot The slot where the Call Control Resource Provider (CCRP) resides. CCRP process acts as a gateway for call signaling between TDM equipment and the ATM AAL2 network. Range of valid values is 1-17. Note 0 …	Zhone-TCZhoneSlotValue Type Constraints: range: 1..30	.1.3.6.1.4.1.5504.4.3.3.3.1.5
channelTrunkCtrpShelf The shelf where the Trunk Call Temrination Resource Provider (TrunkCtrp) resides. TrunkCtrp is a proccess through which call signaling travels to and from TDM equipment. The CCRP above does not communicate directly w…	Zhone-TCZhoneShelfValue Type Constraints: range: 1..255	.1.3.6.1.4.1.5504.4.3.3.3.1.6
channelTrunkCtrpSlot The slot where the Trunk Call Temrination Resource Provider (TrunkCtrp) resides. TrunkCtrp is a proccess through which call signaling travels to and from TDM equipment. The CCRP above does not communicate directly wi…	Zhone-TCZhoneSlotValue Type Constraints: range: 1..30	.1.3.6.1.4.1.5504.4.3.3.3.1.7
channelPktCtrpShelf The shelf where the Packet Call Temrination Resource Provider (PktCtrp) resides. PktCtrp is a proccess through which call signaling travels to and from ATM AAL2 network. Range of valid values is 1-255. …	Zhone-TCZhoneShelfValue Type Constraints: range: 1..255	.1.3.6.1.4.1.5504.4.3.3.3.1.8
channelPktCtrpSlot The slot where the Packet Call Temrination Resource Provider (PktCtrp) resides. PktCtrp is a proccess through which call signaling travels to and from ATM AAL2 network. Range of valid values is 1-17. No…	Zhone-TCZhoneSlotValue Type Constraints: range: 1..30	.1.3.6.1.4.1.5504.4.3.3.3.1.9
channelActiveCodec Types of voice codecs on the current call. G.711, G.726, G.729 and G.723 are ITU-T standards for voice and multimedia modulation and digital encoding. Valid values for this variable can be:…	Enumeration Enumerated Values: 1 g711Ulaw 2 g711Alaw 3 g726 4 g729A 5 g729B 6 g729E 7 g723R1KBPS5Dot3 8 g723R1KBPS6Dot3 9 g723R1AKBPS5Dot3 10 g723R1AKBPS6Dot3	.1.3.6.1.4.1.5504.4.3.3.3.1.10
channelTimeAlive This indicates how long this channel has been running in TimeTicks. A channel is considered alive when the call parties pick up the phone and data starts to flow and it is no longer alive when the phone is hung up. …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.11
channelPktsSent Number of packets transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.12
channelBytesSent Number of bytes transmitted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.13
channelPktsReceived Number of packets received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.14
channelBytesReceived Number of bytes received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.15
channelPktsLost Number of packets lost.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.16
channelInterArrvJitter The inter arrival jitter in milliseconds.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.17
channelJitterBufferSize Size of jitter buffer in milliseconds. The jitter buffer is used to compensate for inter-arrival packet jitter. It is accomplished by keeping a buffer of packets to allow continuous playout of voice.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.4.3.3.3.1.18