ZHONE-CARD-DIAGNOSTICS-MIB Table View

Augment table of the unit/card resource but specific
to the diagnostic results information. This card 
contains the index to create diagnostics table 
entries (zhoneCardDiagEntry) which contains all the data
for executing and obtaining diagnostic results.

zhoneCardDiagNextEntry row .1.3.6.1.4.1.5504.3.3.5.1

This is the card diagnostics next index table which contains
all the data for:
- index for creating next zhoneCardDiagEntry.

Indexes

ZhonezhoneShelfIndex ZhonezhoneSlotIndex

Column	Syntax	OID
zhoneCardDiagNextIndex We allow ten diagnostic requests from multiple interfaces. The diagNextIndex represents the next available diagnostic request handle for requesting a diagnostic. NOTE: this operates as …	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.5504.3.3.5.1.1

Augment table of the unit/card resource but specific
to the diagnostic results information. This is the card 
diagnostics table which contains all the data for 
executing and obtaining diagnostic results.

zhoneCardDiagEntry row .1.3.6.1.4.1.5504.3.3.6.1

This is the card diagnostics table which contains all the data for:
- invoking diagnostics,
- obtaining diagnostic results.

Indexes

ZhonezhoneShelfIndex ZhonezhoneSlotIndex zhoneCardDiagIndex

Column	Syntax	OID
zhoneCardDiagIndex We allow ten diagnostic requests from multiple interfaces. The diagIndex represents the diagnostic request to start a diagnostic or obtain test results for a completed diagnostic. NOTE:…	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.5504.3.3.6.1.1
zhoneCardDiagType This field specifies the diagnostic to execute. The default value is 'selftest'. NOTE: not all of the individual diagnostics are available on every Zhone card type. NOTE: Zhone card types (cardZho…	Enumerationr/w Enumerated Values: 1 selftest 2 supvBus 3 cardEEprom 4 frbus 5 pcmcia 6 shelfLamp 7 realTimeClock 8 fanTray 9 shelfMonitor 10 ioCard 11 mezzanineCard 12 backPlane 13 midPlane	.1.3.6.1.4.1.5504.3.3.6.1.2
zhoneCardDiagAction The diagAction field represents the diagnostic operation to execute. Current supported actions are as follows: diagStart : begin diagnostics and initialize results. diagStop : stop diagnostics if not yet complete…	Zhone-TCZhoneDiagActionr/w Type Values: 1 diagStart 2 diagStop 3 diagSuspend 4 diagResume	.1.3.6.1.4.1.5504.3.3.6.1.3
zhoneCardDiagRepetition This field specifies the number of repetitions of diagnostics to execute. The default value is 1. NOTE: this field operates as an OR with the diagDuration field. If this field is set to non-zero th…	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.5504.3.3.6.1.4
zhoneCardDiagDuration This field specifies the duration of diagnostics to execute. The default value is 60 seconds. NOTE: this field operates as an OR with the diagRepetition field. If this field is set to non-zero the…	secondsInteger32r/w Constraints: range: 0-600	.1.3.6.1.4.1.5504.3.3.6.1.5
zhoneCardDiagResult This represents the overall diagnostic result.	Zhone-TCZhoneDiagResult Type Values: 1 diagPass 2 diagNotSupported 3 diagUnableToRun 4 diagFail 5 diagInProgress	.1.3.6.1.4.1.5504.3.3.6.1.6
zhoneCardDiagPassCount The number of diagnostics that executed successfully.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.3.3.6.1.7
zhoneCardDiagFailCount The number of diagnostics that have failed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.3.3.6.1.8
zhoneCardDiagDetails The failure reason, if any, for the last diagnostic which has executed. NOTE: An empty string indicates that no additional information is available.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.5504.3.3.6.1.9
zhoneCardDiagStartTime Starting date and time of last selftest execution.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.5504.3.3.6.1.10
zhoneCardDiagEndTime Ending date and time of last selftest execution.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.5504.3.3.6.1.11
zhoneCardDiagRowStatus In any case where a new row can be created either via the cli or zms there will always be a proprietary mib entity of type ZhoneRowStatus which has the basic equivalence of the standard rowstatus object_id.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.3.3.6.1.12

This table contains one entry for each tac
test channel available on Zhone devices. In the
initial release only the primary channel (1) is
supported. Future line cards may support the
second channel. If the second channel is supported
the row will be populated, if the second channel
is not supported a get will return no such instance.

zhoneTacTestEntry row .1.3.6.1.4.1.5504.3.3.7.1

One row per tac test channel.

Indexes

zhoneTacIndex

Column	Syntax	OID
zhoneTacIndex This field is the index field for the tac test channel which will be connected on the external port. This device supports a maximum of two channels, one or both channels may be supported by a device depending on which l…	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5504.3.3.7.1.1
zhoneTacInterfaceIndex This field contains the InterfaceIndex of the physical line to be tested. If no line is currently being tested this value is 0. The ability of a physical line type to support tac test may vary depending …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.5504.3.3.7.1.2
zhoneTacTestMode This field is used to set the mtac test mode for a given line. The options are: mtacModeBridge - All traffic on the given line is bridged across the mtac lines mtacModeLookIn - All outbound traffic on the…	Enumerationr/w Enumerated Values: 1 mtacModeBridge 2 mtacModeLookIn 3 mtacModeLookOut 4 mtacModeNone	.1.3.6.1.4.1.5504.3.3.7.1.3
zhoneTacTestId This object is only valid for Tac Cards which support the new Legerity Suite of tests. This object identifies which test is to be run, or can be set to abort the current test. Test results …	Enumerationr/w Enumerated Values: 1 none 2 runAllTests 3 abortTest 4 calibration 5 foreignDCVoltage 6 foreignACVoltage 7 dcLoopResistance 8 threeElementInsulationResistance 9 fiveElementInsulationResistance 10 threeElementCapacitance 11 receiverOffHook 12 distanceToOpen 13 foreignACCurrents 14 ringerEquivalencyNumber 15 dtmfAndPulseDigitMeasurement 16 noiseMeasurement 17 signalToNoiseRatio 18 arbitrarySignalToneMeasurement 19 toneGeneration 20 transHybridLoss 21 drawAndBreakDialTone 22 inwardCurrent 23 dcFeedSelf 24 onAndOffHookSelfTest 25 ringingSelfTest 26 ringingMonitor 27 meteringSelfTest 28 transmissionSelfTest 29 dialingSelfTest 30 howlerTest 31 fuseTest 32 readLoopAndBatteryConditions	.1.3.6.1.4.1.5504.3.3.7.1.4
zhoneTacTestParam1 Optional Test Parameter #1	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.3.3.7.1.5
zhoneTacTestParam2 Optional Test Paramerter #2	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.3.3.7.1.6
zhoneTacTestParam3 Optional Test Parameter #3	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.3.3.7.1.7
zhoneTacTestParam4 Optional Test Parameter #4	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.3.3.7.1.8
zhoneTacTestParam5 Optional Test Parameter #5 Value: 0x00000001 Force Line-Test mode	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5504.3.3.7.1.9

Table of Tac Test Results objects.  Indexed by same index
as zhoneTacTestTable.
          
This table is only valid for Tac cards which support
the Legerity Suite of tests.

zhoneTacTestResultsEntry row .1.3.6.1.4.1.5504.3.3.12.1

Entry of Test Results objects. Indexed by same index
as zhoneTacTestEntry.


This entry is only valid for Tac cards which support
the Legerity Suite of tests.

Indexes

zhoneTacIndex

Column	Syntax	OID
zhoneTacTestResultsTimeStarted Description.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.3.3.12.1.1
zhoneTacTestResultsTimeEnded Description.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.3.3.12.1.2
zhoneTacTestResultStatus Contains test results.	Enumeration Enumerated Values: 1 testNotStarted 2 testInProgress 3 testCompleted 4 testAborted 5 testNotSupported	.1.3.6.1.4.1.5504.3.3.12.1.3
zhoneTacTestResultsOutput For Legerity Test Suite, results of test(s) are output to this object as one string, separated by UNIX '/n' for newline characters and terminated by the NULL character. This test results will persist unti…	OctetString Constraints: range: 1-8000	.1.3.6.1.4.1.5504.3.3.12.1.4