ZHONE-CARD-DIAGNOSTICS-MIB

        Contains the diagnostics and results available on a per card or resource basis.
    
Source file
ZHONE-CARD-DIAGNOSTICS-MIB
Last revised
Identity
zhoneCardDiagnosticsModule
Base OID
1.3.6.1.4.1.5504.6.11
Imported Objects
IF-MIB InterfaceIndexOrZero
SNMPv2-CONF OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) TimeTicks
SNMPv2-TC DateAndTime
Zhone zhoneCard zhoneModules zhoneShelfIndex zhoneSlotIndex
Zhone-TC ZhoneDiagAction ZhoneDiagResult ZhoneRowStatus
Net-SNMP examples using the zhone MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'ZHONE-CARD-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'ZHONE-CARD-DIAGNOSTICS-MIB::zhoneCardDiagnosticsModule'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZHONE-CARD-DIAGNOSTICS-MIB' -M '/opt/observium/mibs/zhone:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZHONE-CARD-DIAGNOSTICS-MIB::zhoneCardDiagnosticsModule'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (37)
.1.3.6.1.4.1.5504.3.3.12
.1.3.6.1.4.1.5504.3.3.12.1
.1.3.6.1.4.1.5504.3.3.12.1.1
.1.3.6.1.4.1.5504.3.3.12.1.2
Enumeration
.1.3.6.1.4.1.5504.3.3.12.1.3
OctetString
.1.3.6.1.4.1.5504.3.3.12.1.4
.1.3.6.1.4.1.5504.3.3.13
.1.3.6.1.4.1.5504.3.3.13.0
.1.3.6.1.4.1.5504.3.3.5
.1.3.6.1.4.1.5504.3.3.5.1
Integer32
.1.3.6.1.4.1.5504.3.3.5.1.1
.1.3.6.1.4.1.5504.3.3.6
.1.3.6.1.4.1.5504.3.3.6.1
Integer32
.1.3.6.1.4.1.5504.3.3.6.1.1
.1.3.6.1.4.1.5504.3.3.6.1.10
.1.3.6.1.4.1.5504.3.3.6.1.11
.1.3.6.1.4.1.5504.3.3.6.1.12
Enumeration
.1.3.6.1.4.1.5504.3.3.6.1.2
.1.3.6.1.4.1.5504.3.3.6.1.3
Integer32
.1.3.6.1.4.1.5504.3.3.6.1.4
secondsInteger32
.1.3.6.1.4.1.5504.3.3.6.1.5
.1.3.6.1.4.1.5504.3.3.6.1.6
.1.3.6.1.4.1.5504.3.3.6.1.7
.1.3.6.1.4.1.5504.3.3.6.1.8
OctetString
.1.3.6.1.4.1.5504.3.3.6.1.9
.1.3.6.1.4.1.5504.3.3.7
.1.3.6.1.4.1.5504.3.3.7.1
Integer32
.1.3.6.1.4.1.5504.3.3.7.1.1
.1.3.6.1.4.1.5504.3.3.7.1.2
Enumeration
.1.3.6.1.4.1.5504.3.3.7.1.3
Enumeration
.1.3.6.1.4.1.5504.3.3.7.1.4
.1.3.6.1.4.1.5504.3.3.7.1.5
.1.3.6.1.4.1.5504.3.3.7.1.6
.1.3.6.1.4.1.5504.3.3.7.1.7
.1.3.6.1.4.1.5504.3.3.7.1.8
.1.3.6.1.4.1.5504.3.3.7.1.9
.1.3.6.1.4.1.5504.6.11
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. Zhonezhone
  8. Zhone-TCzhone
  9. ZHONE-CARD-DIAGNOSTICS-MIBzhoneselected
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.5504.3.3.13.0.1
This trap occurs when a ring signal fails to be detected,
or when it re-starts after failure.
.1.3.6.1.4.1.5504.3.3.13.0.2
This trap occurs when a fault in the ringer power bus is
detected. Such fault may be caused by the possible shortage
in the POTS or DSL line.