ZHNLAYER2BRIDGING Table View

Bridge Table.

bridgeEntry row .1.3.6.1.4.1.5504.2.5.42.1.8.1

Bridge Table.

Indexes

bridgeKey

Column	Syntax	OID
bridgeKey Unique key for each Bridge table entry.	Unsigned32 Constraints: range: 0-4096	.1.3.6.1.4.1.5504.2.5.42.1.8.1.1
bridgeEnable Enables or disables this Bridge table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.8.1.2
bridgeStatus The status of the bridge table entry. Enumeration of: Disabled Enabled Error	BridgeEntryStatusValues Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.8.1.3
bridgeName Human-readable name for this Bridge table entry.	OctetStringr/w	.1.3.6.1.4.1.5504.2.5.42.1.8.1.4
vlanID The 802.1Q VLAN ID associated with this Bridge entry. A value of 0 indicates either Untagged or PriorityOnly tagging, which are treated identically.	Unsigned32r/w Constraints: range: 0-4096	.1.3.6.1.4.1.5504.2.5.42.1.8.1.5
vlanType The type of 802.1Q VLAN associated with this Bridge entry. Enumeration of: Unknown Bridged Routed TlsBridged PppoeRouted PppoeBridged BRouted PWEBridged…	VlanTypeValuesr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.8.1.6
secureVlan Secure setting for a VLAN associated with a bridge table entry. Enumeration of: disable enable unknown	VlanSecureTyper/w Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.8.1.7
bridgeTableRowStatus The SNMP RowStatus of the current row. The following objects must be specified upon row creation: vlanID vlanType bridgeName	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.2.5.42.1.8.1.8

Filter table containing filter entries each of which is associated 
with one Bridge as specified by a Bridge table entry.

filterBridgeEntry row .1.3.6.1.4.1.5504.2.5.42.1.9.1

Bridge Filter Table.

Indexes

filterKey filterBridgeReference

Column	Syntax	OID
filterKey Unique key for each Bridge Filter table entry.	Unsigned32 Constraints: range: 0-4096	.1.3.6.1.4.1.5504.2.5.42.1.9.1.1
filterEnable Enables or disables this Filter table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.9.1.2
zhnFilterStatus The status of this Filter table entry. Enumeration of: Disabled Enabled Error	BridgeEntryStatusValuesr/w Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.9.1.3
filterBridgeReference The BridgeKey value of the Bridge table entry associated with this Filter.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.2.5.42.1.9.1.4
filterInterface The interface or interfaces associated with this Filter table entry. The bridge corresponding to this Filter table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet all…	OctetStringr/w	.1.3.6.1.4.1.5504.2.5.42.1.9.1.5
sourceMACFromVendorClassIDFilter A string used to identify one or more devices via DHCP for which MAC address filtering would subsequently apply. A device is considered matching if it its DHCP Vendor Class Identifier (Option 60 as defined in RFC 213…	OctetStringr/w	.1.3.6.1.4.1.5504.2.5.42.1.9.1.6
sourceMACFromVendorClassIDFilterExclude If false, on ingress to the interfaces associated with this Filter, the Bridge admits only those packets whose source MAC Address matches that of a LAN device previously identified as described in SourceMACFromVendor…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.9.1.7
bridgeFilterRowStatus The SNMP RowStatus of the current row. The following objects must be specified upon row creation: filterBridgeReference	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.2.5.42.1.9.1.8

Marking table identifies non-default layer-2 marking behavior for 
packets on egress from the specified interfaces.

markingEntry row .1.3.6.1.4.1.5504.2.5.42.1.10.1

Marking table identifies non-default layer-2 marking behavior for
packets on egress from the specified interfaces.

Indexes

markingKey markingBridgeReference

Column	Syntax	OID
markingKey Unique key for each Bridge Marking table entry.	Unsigned32 Constraints: range: 0-4096	.1.3.6.1.4.1.5504.2.5.42.1.10.1.1
markingEnable Enables or disables this Marking table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.10.1.2
markingStatus The status of this Marking table entry. Enumeration of: Disabled Enabled Error	BridgeEntryStatusValues Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.10.1.3
markingBridgeReference The BridgeKey value of the Bridge table entry associated with this Marking. The effect of a Marking table entry applies only to packets that have been admitted to the specified bridge (regardless of the…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.2.5.42.1.10.1.4
markingInterface The interface or interfaces associated with this Marking table entry. The bridge corresponding to this Marking table entry is defined to admit packets on ingress to the bridge from the specified interfaces that meet a…	OctetStringr/w	.1.3.6.1.4.1.5504.2.5.42.1.10.1.5
vlanIDUntag If true, on egress to the interfaces associated with this Marking table entry, all packets are Untagged. That is, the VLAN tag is stripped from the packet. If false, on egress to the interfaces associated with this M…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.10.1.6
vlanIDMark The 802.1Q VLAN ID to be used on egress to the interfaces associated with this Marking table entry (if VLANIDUntag is false). A value of -1 indicates that the default VLAN ID for the Bridge should be used instead (as…	Integer32r/w Constraints: range: -1-4095	.1.3.6.1.4.1.5504.2.5.42.1.10.1.7
ethernetPriorityMark Ethernet priority code (as defined in 802.1D) to mark traffic with that falls into this Bridge on egress to the interfaces associated with this Marking table entry. A value of -1 indicates no change from the incoming …	Integer32r/w Constraints: range: -1-7	.1.3.6.1.4.1.5504.2.5.42.1.10.1.8
ethernetPriorityOverride If false, on egress to the interfaces associated with this Marking table entry, the EthernetPriorityMark, if specified, is applied only to packets of priority 0. If true, on egress to the interfaces as…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.5504.2.5.42.1.10.1.9
vlanIDType This parameter specifies the port VLAN membership type. The supported VLAN membership types are: Tagged - The frame leaving the device has one VLAN tag. Untagged - The frame leavi…	VlanIDType Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.10.1.10
bridgeMarkingRowStatus The SNMP RowStatus of the current row.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.2.5.42.1.10.1.11

Table containing all LAN and WAN interfaces that are available to 
be referenced by the Bridge table. Only interfaces that can carry 
layer-2 bridged traffic are included.

availableInterfaceEntry row .1.3.6.1.4.1.5504.2.5.42.1.11.1

Table containing all LAN and WAN interfaces that are available to
be referenced by the Bridge table. Only interfaces that can carry
layer-2 bridged traffic are included.

Indexes

availableInterfaceKey

Column	Syntax	OID
availableInterfaceKey Unique key for each interface entry.	Unsigned32 Constraints: range: 0-4096	.1.3.6.1.4.1.5504.2.5.42.1.11.1.1
interfaceType Indicates whether the interface is a LAN-side or WAN-side interface, or a LAN-side or WAN-side connection to the Gateway.	BridgingIntfTypeValues Type Constraints: range: 0..32	.1.3.6.1.4.1.5504.2.5.42.1.11.1.2
interfaceReference This table should contain a single entry for each available LAN and WAN interface. For a WAN interface, this parameter is the full hierarchical parameter name of a particular WANConnectionDevice. A WANConnectionDevic…	OctetString	.1.3.6.1.4.1.5504.2.5.42.1.11.1.3
availableInterfaceRowStatus The SNMP RowStatus of the current row.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.2.5.42.1.11.1.4

Layer 2 VLAN Port Membership Table.

vlanPortMembershipEntry row .1.3.6.1.4.1.5504.2.5.42.1.12.1

Layer 2 VLAN Port Membership Table.

Indexes

IF-MIBifIndex vlanPortVlanID

Column	Syntax	OID
vlanPort Bridge interface(port) name.	OctetString	.1.3.6.1.4.1.5504.2.5.42.1.12.1.1
vlanPortVlanID The 802.1Q VLAN ID associated with this Bridge entry.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5504.2.5.42.1.12.1.2
vlanPortMembershipType This parameter specifies the port VLAN membership type. When creating a new Vlan Port Member Entry, the supported VLAN membership types are: Tagged - The frame leaving the device has one VLAN tag. …	VlanIDTyper/w Type Constraints: range: 0..16	.1.3.6.1.4.1.5504.2.5.42.1.12.1.3
vlanPortMembershipAction The SNMP RowStatus of the current row.	Zhone-TCZhoneRowStatusr/w Type Values: 1 active 4 createAndGo 6 destroy	.1.3.6.1.4.1.5504.2.5.42.1.12.1.4