ZEBRA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
78

zbrOptUnsAlertsTable

table
.1.3.6.1.4.1.10642.3.30.2 · 1 row entry · 8 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrOptUnsAlertsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrOptUnsAlertsTable' 
Table of configured alerts.
          
The number of entries is given by the value of zbrOptUnsAlertsNumEntries.
zbrOptUnsAlertsEntry row .1.3.6.1.4.1.10642.3.30.2.1
One entry in the configured alerts table.
Indexes
Column Syntax OID
zbrOptUnsAlertsIndex
Table row number
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10642.3.30.2.1.1
zbrOptUnsAlertsCondition
Condition to trigger the alert.
Enumeration
Enumerated Values:
1none
2paper-out
3ribbon-out
4head-too-hot
5head-cold
6head-open
7power-supply-over-temp
8ribbon-in
9rewind
10cutter-jammed
11printer-paused
12pq-job-completed
13label-ready
14head-element-bad
15basic-runtime
16basic-forced
17power-on
18clean-printhead
19media-low
20ribbon-low
21replace-head
22battery-low
23rfid-error
24all-messages
25cold-start
26sgd-changed
27motor-over-temp
28head-shutdown
29power-off
30power-reset
31no-rfid-reader
32thermistor-fault
33invalid-head
34rfid-country-code-error
36pmcu-download-fail
37ribbon-auth-error
39country-code-not-selected
40battery-missing
41media-catridge
42media-cartridge-load-error
43media-cartridge-eject-error
44media-cartridge-forced-eject
45cleaning-mode-init
46csr-avail
47ribbon-tension-system-error
48cover-open
49clean-cutter
50paper-error
51duplicate-ip
 .1.3.6.1.4.1.10642.3.30.2.1.2
zbrOptUnsAlertsDestination
Destination of the alert message.
Enumeration
Enumerated Values:
1serial
2parallel
3e-mail
4tcp
5udp
6snmp
7usb
8http-post
9bluetooth
10sdk
11mqtt
99all-destinations
 .1.3.6.1.4.1.10642.3.30.2.1.3
zbrOptUnsAlertsTrigger
Send this message when the condition occurs.
Enumeration
Enumerated Values:
1off
2on-set-only
3on-clear-only
4on-both-set-and-clear
 .1.3.6.1.4.1.10642.3.30.2.1.4
zbrOptUnsAlertsAddress
Destination specific address to send the message to.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.3.30.2.1.6
zbrOptUnsAlertsPort
Destination specific port number to send the message to.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.3.30.2.1.7
zbrOptUnsAlertsQuelling
Enable or disable this alert.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.3.30.2.1.8
zbrOptUnsAlertsSgdName
SGD name specific to this alert.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.3.30.2.1.9

zbrOptUnsAlrtTrackLogTable

table
.1.3.6.1.4.1.10642.3.30.30.3 · 1 row entry · 2 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrOptUnsAlrtTrackLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrOptUnsAlrtTrackLogTable' 
Table of log entries.
          
The number of entries is given by the value of zbrOptUnsAlrtTrackLogNumEntries.
zbrOptUnsAlrtTrackLogEntry row .1.3.6.1.4.1.10642.3.30.30.3.1
One entry in the tracked log table.
Indexes
Column Syntax OID
zbrOptUnsAlrtTrackLogIndex
Table row number
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10642.3.30.30.3.1.1
zbrOptUnsAlrtTrackLogValue
A Log entry.
SNMPv2-TCDisplayString
Constraints:
range: 0-255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.3.30.30.3.1.2

zbrTrackedAlertsTable

table
.1.3.6.1.4.1.10642.10.31 · 1 row entry · 6 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrTrackedAlertsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrTrackedAlertsTable' 
Tracked Alerts Table.
zbrTrackedAlertsTableEntry row .1.3.6.1.4.1.10642.10.31.1
Tracked Alert Table Entry.
Indexes
Column Syntax OID
zbrTrackedAlertsIndex
The index of Tracked Alert entries (0-50)
Integer32
Constraints:
range: 0-50
 .1.3.6.1.4.1.10642.10.31.1.1
zbrTrackedAlertsSeverity
The level of severity of this alert table entry. The printer determines the severity
level assigned to each entry into the table using these values:
other(1), critical(3), warning(4)
Enumeration
Enumerated Values:
1other
3critical
4warning
 .1.3.6.1.4.1.10642.10.31.1.2
zbrTrackedAlertsTrainingLevel
The level of training required to handle the alert
Enumeration
Enumerated Values:
1other
2unknown
3untrained
4trained
5fieldService
6management
 .1.3.6.1.4.1.10642.10.31.1.3
zbrTrackedAlertsGroup
The printer subsytem within the printer that the alert is associated with.
Enumeration
Enumerated Values:
1system
2media
3ribbon
4printhead
5rewinder
6cutter
7zbi
8battery
9rfid
 .1.3.6.1.4.1.10642.10.31.1.4
zbrTrackedAlertsCode
The Alert Conditions, including these conditions.
Enumeration
Enumerated Values:
1paper-out
2ribbon-out
3head-too-hot
4head-under-temp
5head-open
6power-supply-over-temp
7motor-over-temp
8ribbon-in
9rewind-fault
10cutter-jammed
11printer-paused
12head-element-bad
13basic-runtime
14basic-forced
15power-on
16battery-low
17rfid-error
18cold-start
19ribbon-auth-error
20clean-cutter
21paper-error
 .1.3.6.1.4.1.10642.10.31.1.5
zbrTrackedAlertsTime
The value of sysUpTime (1.3.6.1.2.1.1.3.0) at the time that this alert was generated.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.10642.10.31.1.6

zbrNetIfGenSettingsTable

table
.1.3.6.1.4.1.10642.20.10.20.5.2 · 1 row entry · 5 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrNetIfGenSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrNetIfGenSettingsTable' 
Wireless, External Wired, Internal Wired
zbrNetIfGenSettingsEntry row .1.3.6.1.4.1.10642.20.10.20.5.2.1
An entry into General Network Specific Settings Table
Indexes
Column Syntax OID
zbrNetIfGenInterfaceType
A unique value for entry in the interface specific network settings.
Its value ranges between 1 and the number of interfaces supported on
this printer.
Enumeration
Enumerated Values:
1external-wired
2internal-wired
3wireless
 .1.3.6.1.4.1.10642.20.10.20.5.2.1.1
zbrNetIfGenMacAddress
The MAC Address of this interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.20.10.20.5.2.1.2
zbrNetIfGenTablePointer
This OID points to the appropriate interface in the interfaces section of RFC1213.
From there you can view more interface details.
ObjectIdentifier .1.3.6.1.4.1.10642.20.10.20.5.2.1.3
zbrNetIfGenInterfaceRestoreDefaults
Restore all the device specific settings on this interface to their default values.
This will also reset the network stack.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.20.10.20.5.2.1.4
zbrNetIfGenInstalled
Is this interface option installed.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.20.10.20.5.2.1.5

zbrNetIfDhcpTable

table
.1.3.6.1.4.1.10642.20.10.20.10.2 · 1 row entry · 6 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrNetIfDhcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrNetIfDhcpTable' 
Wireless, External Wired, Internal Wired
zbrNetIfDhcpEntry row .1.3.6.1.4.1.10642.20.10.20.10.2.1
An entry into DHCP CID Network Specific Settings Table
Indexes
Column Syntax OID
zbrNetIfDhcpInterfaceType
A unique value for entry in the interface specific network settings.
Its value ranges between 1 and the number of interfaces supported on
this printer.
Enumeration
Enumerated Values:
1external-wired
2internal-wired
3wireless
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.1
zbrNetIfDhcpClientIdEnabled
Enable/disable DHCP-CID for this interface.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.2
zbrNetIfDhcpClientIdType
type of CID to use in DHCP request.
(1)User-ascii: ascii character string.
(2)Mac-address: uses the hardware mac addresses, Prefix and Suffix fields are
ignored.
(3)User-hex: user string made up of hexadecimal n…
Enumerationr/w
Enumerated Values:
1user-ascii
2mac-address
3user-hex
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.3
zbrNetIfDhcpClientIdPrefix
user-ascii- max 11 characters (extra characters are dropped).
user-hex- max 22 characters (representing 11 bytes).
mac-address- field not used.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-22
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.4
zbrNetIfDhcpClientIdSuffix
user-ascii- min 2 character, max 60 characters (extra characters are dropped).
user-hex- min 4 characters, max 120 characters (representing 60 bytes).
mac-address- field not used.

If a prefix is used then…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 2-120
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.5
zbrNetIfDhcpClientArpVerifyEnabled
Will the DHCP client do an ARP verification that the IP address is free before accepting the IP address.
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.20.10.20.10.2.1.6

zbrNetIfTcpSettingsTable

table
.1.3.6.1.4.1.10642.20.10.20.15.2 · 1 row entry · 15 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrNetIfTcpSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrNetIfTcpSettingsTable' 
Wireless, External Wired, Internal Wired
zbrNetIfTcpSettingsEntry row .1.3.6.1.4.1.10642.20.10.20.15.2.1
An entry into TCP/IP Network Specific Settings Table
Indexes
Column Syntax OID
zbrNetIfTcpInterfaceType
A unique value for entry in the interface specific network settings.
Its value ranges between 1 and the number of interfaces supported on
this printer.
Enumeration
Enumerated Values:
1external-wired
2internal-wired
3wireless
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.1
zbrNetIfTcpIpAddr
IP Address of this network interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.2
zbrNetIfTcpSubnetMask
Subnet Mask of this network interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.3
zbrNetIfTcpDefaultGateway
Default Gateway of this network interface.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.4
zbrNetIfTcpIpAddressResolutionMode
IP Protocol of this network interface.
Enumerationr/w
Enumerated Values:
1all-protocols
5dhcp
7permanent
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.5
zbrNetIfTcpConnectionTimeoutCheckingEnabled
This setting controls whether it is possible for tcp connections
to timeout. If this is set to Yes(1), the timeout value setting will be
used to determine how many seconds the connection needs to remain idle in
order t…
Enumerationr/w
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.7
zbrNetIfTcpConnectionTimeoutValue
The connection timeout value used in conjunction with the
Connection Timeout Checking Enabled setting. This value, in seconds, will
tell when to terminate a TCP connection if the other side cannot be contacted.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.8
zbrNetIfTcpArpInterval
The ARP interval in minutes. A gratuitous ARP will be sent at this interval.
Set to 0 to disable.
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.9
zbrNetIfTcpBaseRawPortNumber
The TCP RAW port number to listen on for print jobs on.
The default port is 9100 or 6101. Setting this value to a TCP
port that is in use by another TCP application will return an error.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.10
zbrNetIfTcpWinsAddressing
The source of the WINS server address.
If set to dhcp, the WINS address supplied with dhcp will be used.
If it is set to permanent, it will use the stored WINS address.
Enumerationr/w
Enumerated Values:
1dhcp
2permanent
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.11
zbrNetIfTcpWinsAddress
The WINS server address. If WinsAddressing is DHCP, then
this will automatically be filled by the DHCP server. Otherwise
enter the ip address of the WINS server here.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.12
zbrNetIfTcpIpAddressResolutionSource
IP Address of the Server that assigned the IP Address of this network interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.13
zbrNetIfTcpIpAddressResolutionModeUsed
Resolution mode used to assign the IP address of this network interface.
Enumeration
Enumerated Values:
1no-source
5dhcp
7permanent
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.14
zbrNetIfTcpAlternateRawPortNumber
An alternate TCP RAW port number to listen on for print jobs.
The default port is 9100 or 6101. Setting this value to a TCP
port that is in use by another TCP application will return an error.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.15
zbrNetIfTcpJsonConfigPortNumber
A TCP port number on which to listen for JSON configuration packets.
The default port is 9200. Setting this value to a TCP port that is in use by
another TCP application will return an error.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.20.10.20.15.2.1.16

zbrOutputJobLogTable

table
.1.3.6.1.4.1.10642.30.3 · 1 row entry · 3 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrOutputJobLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrOutputJobLogTable' 
A 2 dimensional list of Job log entries indexed by the output port
number and the log entry index (1 through outputNumJobLogEntries).
The number of entries per output port is given by the value of
outputNumJobLogEntries.
zbrOutputJobLogEntry row .1.3.6.1.4.1.10642.30.3.1
A Job log entry.
Indexes
Column Syntax OID
zbrOutputJobLogInformation
A textual description of print job information.
The protocol, source, and file size are always included.
Other information such as File Server, Queue, File Name, etc
will be included if available.
SNMPv2-TCDisplayString
Constraints:
range: 0-100
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.30.3.1.1
zbrOutputJobLogTime
A string indicating the elapsed time since the last job was
printed. Reported in form X hours X minutes X seconds.
SNMPv2-TCDisplayString
Constraints:
range: 0-50
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.30.3.1.2
zbrOutputJobLogIndex
A unique value for each log entry.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10642.30.3.1.3

zbrZbiCtrlVariableTable

table
.1.3.6.1.4.1.10642.40.20.8 · 1 row entry · 3 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrZbiCtrlVariableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrZbiCtrlVariableTable' 
ZBI Variable Table. Lists the current variables and their values.
zbrZbiCtrlVariableEntry row .1.3.6.1.4.1.10642.40.20.8.1
A ZBI variable entry
Indexes
Column Syntax OID
zbrZbiVariableNameItem
ZBI Variable Name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.40.20.8.1.1
zbrZbiVariableValueItem
ZBI Variable Value.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.40.20.8.1.2
zbrZbiVariableIndex
Index into a table
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.10642.40.20.8.1.3

zbrSuppliesMediaCartTable

table
.1.3.6.1.4.1.10642.48.1.3 · 1 row entry · 11 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrSuppliesMediaCartTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrSuppliesMediaCartTable' 
Supplies Media Cartridge Table.
zbrSuppliesMediaCartTableEntry row .1.3.6.1.4.1.10642.48.1.3.1
Supplies Media Cartridge Table entry.
Indexes
Column Syntax OID
zbrSuppliesMediaCartIndex
The index of cartridge data table entries (0-100).
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.10642.48.1.3.1.1
zbrSuppliesMediaCartCounter
The counter of cartridge insertion entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.2
zbrSuppliesMediaCartPart
The part number of the media cartridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.1.3.1.3
zbrSuppliesMediaCartSerial
The serial number of the cartridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.1.3.1.4
zbrSuppliesMediaCartLength
The total length of the media in the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.5
zbrSuppliesMediaCartWidth
The width of the media in the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.6
zbrSuppliesMediaCartSpeed
The print speed to be used with the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.7
zbrSuppliesMediaCartDarkness
The print darkness to be used with the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.8
zbrSuppliesMediaCartTotalLabelCount
The total number of labels in a new cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.9
zbrSuppliesMediaCartLabelsInitial
The total number of labels in the cartridge at the moment inserted to the printer.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.10
zbrSuppliesMediaCartLabelsRemain
The total number of labels remaining in the cartridge at the moment it was removed from the printer.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.3.1.11

zbrSuppliesMediaRollTable

table
.1.3.6.1.4.1.10642.48.1.4 · 1 row entry · 10 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrSuppliesMediaRollTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrSuppliesMediaRollTable' 
Supplies Media Roll Table.
zbrSuppliesMediaRollTableEntry row .1.3.6.1.4.1.10642.48.1.4.1
Supplies Media Roll Table entry.
Indexes
Column Syntax OID
zbrSuppliesMediaRollIndex
The index of the last 30 calibrated label lengths (0-30).
Integer32
Constraints:
range: 0-30
 .1.3.6.1.4.1.10642.48.1.4.1.1
zbrSuppliesMediaRollLoaded
Is a media loaded, yes or no.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.10642.48.1.4.1.2
zbrSuppliesMediaRollPart
The part number of the media currently loaded.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.1.4.1.3
zbrSuppliesMediaRollSerial
The serial number of the media roll currently loaded.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.1.4.1.4
zbrSuppliesMediaRollLength
The calibrated length of the currently loaded media.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.5
zbrSuppliesMediaRollWidth
The width of the currently loaded media.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.6
zbrSuppliesMediaRollSpeed
The print speed to be used with the currently loaded media.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.7
zbrSuppliesMediaRollDarkness
The print darkness to be used with the currently loaded media.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.8
zbrSuppliesMediaRollTotalLabelCount
The total number of labels in a new media roll.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.9
zbrSuppliesMediaRollLabelsRemain
The total number of labels remaining in the currently loaded media. To be updated at each print event.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.1.4.1.10

zbrSuppliesRibbonCartTable

table
.1.3.6.1.4.1.10642.48.2.3 · 1 row entry · 9 columns
Open in standard view
Uses the zebra variant from /opt/observium/mibs/zebra.
Command help
Walk zbrSuppliesRibbonCartTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'ZEBRA-MIB' -M '/opt/observium/mibs/zebra:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'ZEBRA-MIB::zbrSuppliesRibbonCartTable' 
Ribbon Used Table.
zbrSuppliesRibbonCartTableEntry row .1.3.6.1.4.1.10642.48.2.3.1
Supplies Ribbon Cartridge Table entry.
Indexes
Column Syntax OID
zbrSuppliesRibbonCartIndex
The index of cartridge data table entries (0-100).
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.10642.48.2.3.1.1
zbrSuppliesRibbonCartCounter
The counter of cartridge insertion entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.2.3.1.2
zbrSuppliesRibbonCartPart
The part number of the ribbon cartridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.2.3.1.3
zbrSuppliesRibbonCartSerial
The serial number of the cartridge.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.10642.48.2.3.1.4
zbrSuppliesRibbonCartType
The chemical composition of the ribbon in the cartridge.
Possible responses are 'wax', 'resin', 'wax-resin'.
Enumeration
Enumerated Values:
1wax
2resin
3wax-resin
 .1.3.6.1.4.1.10642.48.2.3.1.5
zbrSuppliesRibbonCartLength
The total length of the ribbon in the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.2.3.1.6
zbrSuppliesRibbonCartWidth
The width of the ribbon in the cartridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.2.3.1.7
zbrSuppliesRibbonCartInitial
The total length of ribbon in the cartridge at the moment inserted to the printer.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.2.3.1.8
zbrSuppliesRibbonCartRemain
The total length of ribbon remaining in the cartridge at the moment it was removed from the printer.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.10642.48.2.3.1.9