XF-RADIOLINK-RLT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

308

xfLIMappingTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.2 · 1 row entry · 4 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfLIMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfLIMappingTable'

This table is used when navigating from a logical entity to interface,
representing the relationship between:
- RLT logical entity and either Bonding/RLP interface;
- Carrier Termination (CT) logical entity and RAU IF interface.

xfLIMappingEntry row .1.3.6.1.4.1.193.81.3.4.5.1.2.1

An entry in the xfLIMappingTable.

Indexes

liEntLogicalIndex liIfIndex

Column	Syntax	OID
liEntLogicalIndex The value of this object uniquely identifies the logical entity: RLT (Radio Link Terminal) and CT (Carrier Termination). The logical entity identified by liEntLogicalIndex is the same interface as identified by the same…	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.1.2.1.1`
liIfIndex It represents the ifIndex of Bonding/RLP interface and RAU IF. The interface identified by liIfIndex is the same interface as identified by the same value of ifIndex.	Integer32 Constraints: `range: 1-2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.1.2.1.2`
xfLIName It represents the Name of the Radio Link Terminal (RLT) or Carrier Termination (CT).	SNMPv2-TCDisplayString Constraints: `range: 0-31` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.193.81.3.4.5.1.2.1.3`
xfLIIfDescr A textual string containing information about the ifDescr of both Channel Group interface (either Bonding or RLP (Radio Link Protection)) and RAU IF interface.	SNMPv2-TCDisplayString Constraints: `range: 0-31` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.193.81.3.4.5.1.2.1.4`

xfCarrierTerminationTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.3 · 1 row entry · 24 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfCarrierTerminationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfCarrierTerminationTable'

This table is used to configure the Carrier Termination (CT).

xfCarrierTerminationEntry row .1.3.6.1.4.1.193.81.3.4.5.1.3.1

An entry in the xfCarrierTerminationTable.

Indexes

ENTITY-MIBentLogicalIndex

Column Syntax OID

xfCarrierTermDistinguishedName

It represents the distinguished name of the Carrier Termination in the format Rack/Slot/CT.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.1

xfCarrierTermLabel

Label identifying the Carrier Termination.
It can be freely set by operator to label the Carrier Termination.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.2

xfCarrierTermOperStatus

It represents the operative status of the Carrier Termination:
- down(2)
- up(3)
- degraded(4)
- testing(5)

Enumeration

Enumerated Values:

1	other
2	down
3	up
4	degraded
5	testing

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.3

xfCarrierTermRadioFrameId

It represents the selected Radio Frame ID.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.4

xfCarrierTermPreamble

It allows to set different preambles in the radio frame
of each Carrier Termination in a XPIC or MIMO configuration:
- preambleA(2)
- preambleB(3)
- preambleC(4)
- preambleD(5)
For non XPIC nor MIMO configurations, it c…

Enumerationr/w

Enumerated Values:

1	notSpecified
2	preambleA
3	preambleB
4	preambleC
5	preambleD

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.5

xfCarrierTermSelectedMinACM

It represents the selected minimum Tx ACM (Adaptive Code Modulation).

CarrierTermACMIndexr/w

Type Values:

1	acm4QAMStrong
2	acm4QAMStd
3	acm4QAMLight
4	acm16QAMStrong
5	acm16QAMStd
6	acm16QAMLight
7	acm32QAMStrong
8	acm32QAMStd
9	acm32QAMLight
10	acm64QAMStrong
11	acm64QAMStd
12	acm64QAMLight
13	acm128QAMStrong
14	acm128QAMStd
15	acm128QAMLight
16	acm256QAMStrong
17	acm256QAMStd
18	acm256QAMLight
19	acm512QAMStrong
20	acm512QAMStd
21	acm512QAMLight
22	acm1024QAMStrong
23	acm1024QAMStd
24	acm1024QAMLight
25	acm2048QAMStrong
26	acm2048QAMStd
27	acm2048QAMLight
28	acm4096QAMStrong
29	acm4096QAMStd
30	acm4096QAMLight
31	acm8192QAMStrong
32	acm8192QAMStd
33	acm8192QAMLight
34	acm16384QAMStrong
35	acm16384QAMStd
36	acm16384QAMLight

Description:

This TC enumerates all possible ACM index values.

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.6

xfCarrierTermActualACM

It represents the actual (current) Tx ACM (Adaptive Code Modulation).

CarrierTermACMIndex

Type Values:

1	acm4QAMStrong
2	acm4QAMStd
3	acm4QAMLight
4	acm16QAMStrong
5	acm16QAMStd
6	acm16QAMLight
7	acm32QAMStrong
8	acm32QAMStd
9	acm32QAMLight
10	acm64QAMStrong
11	acm64QAMStd
12	acm64QAMLight
13	acm128QAMStrong
14	acm128QAMStd
15	acm128QAMLight
16	acm256QAMStrong
17	acm256QAMStd
18	acm256QAMLight
19	acm512QAMStrong
20	acm512QAMStd
21	acm512QAMLight
22	acm1024QAMStrong
23	acm1024QAMStd
24	acm1024QAMLight
25	acm2048QAMStrong
26	acm2048QAMStd
27	acm2048QAMLight
28	acm4096QAMStrong
29	acm4096QAMStd
30	acm4096QAMLight
31	acm8192QAMStrong
32	acm8192QAMStd
33	acm8192QAMLight
34	acm16384QAMStrong
35	acm16384QAMStd
36	acm16384QAMLight

Description:

This TC enumerates all possible ACM index values.

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.7

xfCarrierTermSelectedMaxACM

It represents the selected maximum Tx ACM (Adaptive Code Modulation).

CarrierTermACMIndexr/w

Type Values:

1	acm4QAMStrong
2	acm4QAMStd
3	acm4QAMLight
4	acm16QAMStrong
5	acm16QAMStd
6	acm16QAMLight
7	acm32QAMStrong
8	acm32QAMStd
9	acm32QAMLight
10	acm64QAMStrong
11	acm64QAMStd
12	acm64QAMLight
13	acm128QAMStrong
14	acm128QAMStd
15	acm128QAMLight
16	acm256QAMStrong
17	acm256QAMStd
18	acm256QAMLight
19	acm512QAMStrong
20	acm512QAMStd
21	acm512QAMLight
22	acm1024QAMStrong
23	acm1024QAMStd
24	acm1024QAMLight
25	acm2048QAMStrong
26	acm2048QAMStd
27	acm2048QAMLight
28	acm4096QAMStrong
29	acm4096QAMStd
30	acm4096QAMLight
31	acm8192QAMStrong
32	acm8192QAMStd
33	acm8192QAMLight
34	acm16384QAMStrong
35	acm16384QAMStd
36	acm16384QAMLight

Description:

This TC enumerates all possible ACM index values.

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.8

xfCarrierTermCapabilitiesLastChange

The value of sysUpTime at the time of the last creation or
deletion of an entry in the xfCarrierTerminationCapabilityTable.
If the number of entries has been unchanged since the last
re-initialization of the local netwo…

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.9

xfCarrierTermReferenceSEC

Reference Spectrum Efficiency Class (SEC):
- notSpecified(1): not configured, not possible to set
- sec2(2): spectrum eff. Class 2
- sec4L(3): spectrum eff. Class 4L
- sec4H(4): specturm eff. Class 4H
- sec5LB(5): spect…

Enumerationr/w

Enumerated Values:

1	notSpecified
2	sec2
3	sec4L
4	sec4H
5	sec5LB
6	sec5HB
7	sec6LB
8	sec6HB
9	sec7B

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.10

xfCarrierTermWantedLicensedCapacity

It represents the wanted traffic licensed capacity on the Carrier Termination, expressed in Kbps.
The default value 0 (i.e. disabled) means that no wanted licensed capacity has been selected by the user.
The value used …

Integer32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.11

xfCarrierTermActualLicensedCapacity

This MO represents the Actual Licensed Capacity used on the Carrier Termination:
- if Wanted Licensed Capacity is disabled (i.e. xfCarrierTermWantedLicensedCapacity = 0),
the Selected Max ACM (xfCarrierTermSelectedMax…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.12

xfCarrierTermActualCapacity

It represents the actual transmitted capacity supported by Carrier Termination in Kbps.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.13

xfCarrierTermPolarization

XPIC polarization, either horizontal or vertical.

Enumerationr/w

Enumerated Values:

1	notSpecified
2	horizontal
3	vertical

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.14

xfCarrierTermXPICOperStatus

XPIC locking status:
- Other(1): don't use
- Locked(2): XPIC is locked: XPI valid
- Unlocked(3): XPIC is not locked: XPI not valid
- Mute(4): XPIC is muted (XPIC recovery started)
- NotApplicable(5): XPIC is disabled

Enumeration

Enumerated Values:

1	other
2	locked
3	unlocked
4	mute
5	notApplicable

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.15

xfCarrierTermMIMOOperStatus

MIMO locking status:
- Other(1): don't use
- Locked(2): MIMO is locked: XPI and SNIR valid
- Unlocked(3): MIMO is not locked: XPI and SNIR not valid
- Mute(4): MIMO is muted
- NotApplicable(5): MIMO is disabled

Enumeration

Enumerated Values:

1	other
2	locked
3	unlocked
4	mute
5	notApplicable

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.16

xfCarrierTermSNIR

Signal to Noise Interference Ratio (SNIR) in dB.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.17

xfCarrierTermXPI

Cross-Polar Interference (XPI) level of the receiver in tenth of dB.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.18

xfCarrierTermReset

Reset command forces all the Carrier Termination settings
to their own default.

Enumerationr/w

Enumerated Values:

1	other
2	noReset
3	reset

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.19

xfCarrierTermRestore

Restore command clears RFloop, IFloop and turns RAU transmitter on.

Enumerationr/w

Enumerated Values:

1	other
2	noRestore
3	restore

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.20

xfCarrierTermAutoRemoveLoopEnable

Auto remove all RL loops after 15 minutes.

Enumerationr/w

Enumerated Values:

1	other
2	disabled
3	enabled

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.21

xfCarrierTermBerAlarmThreshold

Threshold for BER alarm.
Default: ber1e3(2).

Enumerationr/w

Enumerated Values:

1	other
2	ber1e3
3	ber1e4
4	ber1e5
5	ber1e6

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.22

xfCarrierTermActualRxACM

It represents the actual (current) Rx ACM (Adaptive Code Modulation).

CarrierTermACMIndex

Type Values:

1	acm4QAMStrong
2	acm4QAMStd
3	acm4QAMLight
4	acm16QAMStrong
5	acm16QAMStd
6	acm16QAMLight
7	acm32QAMStrong
8	acm32QAMStd
9	acm32QAMLight
10	acm64QAMStrong
11	acm64QAMStd
12	acm64QAMLight
13	acm128QAMStrong
14	acm128QAMStd
15	acm128QAMLight
16	acm256QAMStrong
17	acm256QAMStd
18	acm256QAMLight
19	acm512QAMStrong
20	acm512QAMStd
21	acm512QAMLight
22	acm1024QAMStrong
23	acm1024QAMStd
24	acm1024QAMLight
25	acm2048QAMStrong
26	acm2048QAMStd
27	acm2048QAMLight
28	acm4096QAMStrong
29	acm4096QAMStd
30	acm4096QAMLight
31	acm8192QAMStrong
32	acm8192QAMStd
33	acm8192QAMLight
34	acm16384QAMStrong
35	acm16384QAMStd
36	acm16384QAMLight

Description:

This TC enumerates all possible ACM index values.

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.23

xfCarrierTermFeCTSeverity

This object represents the highest severity of Far-End CT alarms and is populated only if Far-End terminal is
represented by a Packet terminal (PT). Craft uses this MO to colour the box representing the Far-End CT
in th…

Bits

Enumerated Values:

0	feCtSeverity0
1	feCtSeverity1
2	feCtSeverity2

.1.3.6.1.4.1.193.81.3.4.5.1.3.1.24

xfCarrierTerminationCapabilityTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.4 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfCarrierTerminationCapabilityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfCarrierTerminationCapabilityTable'

This table is used to configure the Carrier Termination (CT).

xfCarrierTerminationCapabilityEntry row .1.3.6.1.4.1.193.81.3.4.5.1.4.1

An entry in the xfCarrierTerminationCapabilityTable.

Indexes

ENTITY-MIBentLogicalIndex xfRadioFrameId

Column Syntax OID

xfRadioFrameId

It represents the Radio Frame Id.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.1

xfChannelSpacing

Channel spacing:
- ETSI: 3.5, 7, 14, 28, 40, 56, 112 MHz
- ANSI: 10, 20, 30, 40, 50, 60, 80 MHz

Enumeration

Enumerated Values:

1	chspOther
2	chsp3500kHz
3	chsp7MHz
4	chsp10MHz
5	chsp14MHz
6	chsp20MHz
7	chsp28MHz
8	chsp30MHz
9	chsp40MHz
10	chsp50MHz
11	chsp56MHz
12	chsp60MHz
13	chsp80MHz
14	chsp112MHz

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.2

xfFrameFormatType

It represents the Frame Format type:
- Standard
- XPIC
- MIMO
- Long Haul Standard
- Long Haul XPIC
- XPIC on two boards
- Long Haul XPIC on two boards

Enumeration

Enumerated Values:

1	other
2	standard
3	xpic
4	mimo
5	longHaulStandard
6	longHaulXpic
7	xpic2boards
8	longHaulXpic2boards
9	mimo2boards
10	sisoCA
11	xpicCA

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.3

xfMinACMCapacity

It represents the minimum capacity designed for the specific frame format (Radio Frame Id).

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.4

xfMaxACMCapacity

It represents the maximum capacity designed for the frame format (Radio Frame Id).

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.5

xfACMProfile

It specifies which adaptive code and modulation profiles are supported.

Bits

Enumerated Values:

0	none
1	qam4Strong
2	qam4Std
3	qam4Light
4	qam16Strong
5	qam16Std
6	qam16Light
7	qam32Strong
8	qam32Std
9	qam32Light
10	qam64Strong
11	qam64Std
12	qam64Light
13	qam128Strong
14	qam128Std
15	qam128Light
16	qam256Strong
17	qam256Std
18	qam256Light
19	qam512Strong
20	qam512Std
21	qam512Light
22	qam1024Strong
23	qam1024Std
24	qam1024Light
25	qam2048Strong
26	qam2048Std
27	qam2048Light
28	qam4096Strong
29	qam4096Std
30	qam4096Light
31	qam8192Strong
32	qam8192Std
33	qam8192Light
34	qam16384Strong
35	qam16384Std
36	qam16384Light

.1.3.6.1.4.1.193.81.3.4.5.1.4.1.6

xfACMProfileCapacityTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.5 · 1 row entry · 2 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfACMProfileCapacityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfACMProfileCapacityTable'

This tables reports the ACM capacities of the selected Radio Frame Id per each Carrier Termination.

xfACMProfileCapacityEntry row .1.3.6.1.4.1.193.81.3.4.5.1.5.1

An entry in the xfACMProfileCapacityTable.

Indexes

ENTITY-MIBentLogicalIndex xfACMIndex

Column Syntax OID

xfACMIndex

It represents the positional index of the bitmap xfACMProfile in xfCarrierTerminationCapabilityTable.

CarrierTermACMIndex

Type Values:

1	acm4QAMStrong
2	acm4QAMStd
3	acm4QAMLight
4	acm16QAMStrong
5	acm16QAMStd
6	acm16QAMLight
7	acm32QAMStrong
8	acm32QAMStd
9	acm32QAMLight
10	acm64QAMStrong
11	acm64QAMStd
12	acm64QAMLight
13	acm128QAMStrong
14	acm128QAMStd
15	acm128QAMLight
16	acm256QAMStrong
17	acm256QAMStd
18	acm256QAMLight
19	acm512QAMStrong
20	acm512QAMStd
21	acm512QAMLight
22	acm1024QAMStrong
23	acm1024QAMStd
24	acm1024QAMLight
25	acm2048QAMStrong
26	acm2048QAMStd
27	acm2048QAMLight
28	acm4096QAMStrong
29	acm4096QAMStd
30	acm4096QAMLight
31	acm8192QAMStrong
32	acm8192QAMStd
33	acm8192QAMLight
34	acm16384QAMStrong
35	acm16384QAMStd
36	acm16384QAMLight

Description:

This TC enumerates all possible ACM index values.

.1.3.6.1.4.1.193.81.3.4.5.1.5.1.1

xfACMCapacity

It represents the capacity in Kbps of the ACM profile identified by the positional index
xfACMIndex of the xfACMProfile in xfCarrierTerminationCapabilityTable.
Value 0 means that the ACM profile is not included in curre…

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.5.1.2

xfRLTTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.6 · 1 row entry · 20 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLTTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLTTable'

This table is used to configure the Radio Link Terminal (RLT).

xfRLTEntry row .1.3.6.1.4.1.193.81.3.4.5.1.6.1

An entry in the xfRLTTable.

Indexes

rltEntLogicalIndex

Column Syntax OID

rltEntLogicalIndex

It represents the entLogicalIndex of the Radio Link Terminal (RLT).
The logical entity identified by rltEntLogicalIndex is the same
entity as identified by the same value of entLogicalIndex.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.1

xfRLTDistinguishedName

It represents the distinguished name of the Radio Link Terminal (RLT): Rack/Slot/RLT number.
It is the ifName of RL-WAN i/f.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.2

xfRLTIpAddress

IPv4 address of the network element the Radio Link Terminal (RLT) belongs to.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.3

xfRLTIPv6Address

IPv6 Address of the network element the Radio Link Terminal (RLT) belongs to.

INET-ADDRESS-MIBInetAddressIPv6

Type Constraints:
range: 16

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.4

xfRLTNeName

The name of the network element the Radio Link Terminal (RLT) belongs to (System Name - sysName).

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.5

xfRLTNeType

The type of the network element the Radio Link Terminal (RLT) belongs to (System Descr - sysDescr).

SNMPv2-TCDisplayString

Constraints:
range: 0-255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.6

xfRLTId

Radio Link Terminal (RLT) identifier used for integrity check with far-end.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.7

xfRLTExpectedFarEndId

Expected Id of far-end Radio Link Terminal (RLT), used for integrity check with near-end.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.8

xfRLTFarEndIdCheck

When enabled, the system verifies that far-end Radio Link Terminal name is equal to the expected.
If ok Radio Link Terminal status is UP. If not ok the Radio Link Terminal status is stated as DOWN.
Default value: disabl…

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.9

xfRLTStatus

It represents the operational status of the Radio Link Terminal (RLT).

Enumeration

Enumerated Values:

1	other
2	down
3	up
4	degraded
5	resourceUnavailable

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.10

xfRLTMode

The mode of the Radio Link Terminal (RLT).
Values:
- 1+0: onePlusZero (default)
- 1+1 RLP: onePlusOneRadioLinkProtection
- 2+0 RLB: twoPlusZeroAdvancedRadioLinkBonding
- 1+1 RLP EQP: onePlusOneRadioLinkProtectionAndEqui…

Enumerationr/w

Enumerated Values:

1	other
2	onePlusZero
3	onePlusOneRadioLinkProtection
4	twoPlusZeroAdvancedRadioLinkBonding
5	onePlusOneRadioLinkProtectionAndEquipmentProtection
6	twoPlusZeroRadioLinkBondingAndEquipmentProtection
7	twoPlusTwoRadioLinkProtectionAndEquipmentProtection
8	fourPlusZeroRadioLinkBondingAndEquipmentProtection

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.11

xfRLTActualTXTotalCapacity

It represents the total transmitted capacity throughput (considering both Packet and TDM traffic),
expressed in bps, of the Radio Link Terminal (RLT).

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.12

xfRLTActualTXPacketCapacity

It represents the transmitted packet capacity throughput (only packet traffic),
expressed in bps, of the Radio Link Terminal (RLT).

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.13

xfRLTLimitedTotalCapacity

It represents the total transmitted capacity throughput (considering both Packet and TDM traffic),
expressed in bps, of the Radio Link Terminal (RLT) limited by License.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.14

xfRLTRltSeverity

This object represents the highest severity alarm related to RLT with logical index 'rltEntLogicalIndex'.
Node GUI uses the Far-End entry value (of this MIB MO) to define the colour of the Far-End RLT box in the hop vie…

Bits

Enumerated Values:

0	rltSeverity0
1	rltSeverity1
2	rltSeverity2

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.15

xfRLTCapability

Each bit of this object represents an RLT capability:
Bit 0 - XPIC capability
Bit 1 - TDM capability
Bit 2 - CsPlurality capability
Bit 3 - CtAutoSelection capability
Bit 4 - OnePlusZero capability
Bit 5 - OnePlusOneRad…

Bits

Enumerated Values:

0	xpicCapability0
1	capTDMWithEQP
2	capCsPlurality
3	capCtAutoSelection
4	capOnePlusZero
5	capOnePlusOneRadioLinkProtection
6	capTwoPlusZeroAdvancedRadioLinkBonding
7	capOnePlusOneRadioLinkProtectionWithEQP
8	capTwoPlusZeroRadioLinkBondingWithEQP
9	capTwoPlusTwoRadioLinkProtectionWithEQP
10	capFourPlusZeroRadioLinkBondingWithEQP
11	capXpicBetweenBoards
12	capXpicMembersAutoSelection
13	capManualEqpSwitch
14	capEnhAcmMaxCapacity
15	capEnhAcmMaxProtection
16	capRLEncryption
17	capMIMO
18	capTXswoAndSSD

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.16

xfRLTInventoryLastChange

The value of sysUpTime at the time of the last creation or
deletion of an entry in the xfRLTHierarchyModuleTable.
If the current state was entered prior to the last
re-initialization of the local network management subs…

SNMPv2-SMITimeTicks

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.17

xfRLTCpriMode

Set the mode of the CPRI front-haul product.
Default: notApplicable.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.18

xfRLTReset

It resets RLT to default configuration.

Enumerationr/w

Enumerated Values:

1	other
2	rltNoReset
3	rltReset

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.19

xfRLTMeasuredHopLength

It represents the measured value of the radio hop length expressed in Km.
Values:
- Radio hop length measurement not yet available: -1;
- Measured hop length in Km: > 0.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.6.1.20

xfTrafficTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.7 · 1 row entry · 2 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfTrafficTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfTrafficTable'

This table is used to map the TDM interface to the specified RLT.

xfTrafficEntry row .1.3.6.1.4.1.193.81.3.4.5.1.7.1

An entry in the xfTrafficEntry.

Indexes

trEntLogicalIndex

Column Syntax OID

trEntLogicalIndex

It represents the entLogicalIndex of the Radio Link Terminal (RLT).
The logical entity identified by trEntLogicalIndex is the same
interface as identified by the same value of entLogicalIndex.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.7.1.1

xfTDMEnable

It allows to map TDM interface to a specific Radio Link Terminal (RLT).
Default: disable.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.7.1.2

xfRLTDMIfTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.8 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLTDMIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLTDMIfTable'

This table is an extention of the ifTable used to configure TDM interface.

xfRLTDMIfEntry row .1.3.6.1.4.1.193.81.3.4.5.1.8.1

An entry in the xfRLTDMIfEntry.

Indexes

xfRLTDMIfIndex

Column Syntax OID

xfRLTDMIfIndex

It is the ifIndex of RL TDM I/F table.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.1

xfActualTDMCapacity

It represents the current tributary capacity.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.2

xfWantedTDMAllocation

It represents the wanted tributary allocation.

Bitsr/w

Enumerated Values:

firstE1

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.3

xfActualTDMAllocation

It represents the actual tributary allocation.

Bits

Enumerated Values:

firstE1

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.4

xfTDMIfAlarms

This object shows TDM if related alarms.

Bits

Enumerated Values:

0	ber0
1	ber1
2	ber2

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.5

xfTDMRxLoop

It configures TDM RX loop:
- other(1)
- enable(2)
- disable(3) (default)

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.6

xfTDMDistinguishedName

It is the disinguished name of TDM i/f, i.e. R/S/P.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.7

xfTDMMaxTributaries

It represents the maximum number of tributaries that can be allocated to TDM i/f,
depending on frame ID, minimum ACM profile configured and licensed capacity in each CTs of the RLT.
The maximum number is limited to 80.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.8

xfTDMHopLength

It represents the length of the radio hop expressed in Km.
This is used to calculate the propagation delay over the radio hop
that shall be compensated to guarantee TDM traffic error free.
Values:
- default value for …

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.8.1.9

xfCGIfTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.9 · 1 row entry · 6 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfCGIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfCGIfTable'

This table is an extension of ifTable reporting the main characteristics of CG i/f.

xfCGIfEntry row .1.3.6.1.4.1.193.81.3.4.5.1.9.1

An entry in the xfCGIfEntry.

Indexes

xfCGIfIndex

Column Syntax OID

xfCGIfIndex

It is the ifIndex of CG interface.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.1

xfCGIfMinSpeed

The minimum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities.
Note: in case of bonding configurations, it represents the minimum of the min speeds
of all Carrier Termin…

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.2

xfCGIfMaxSpeed

The maximum speed (throughput) of this interface expressed in bit/s, including both Ethernet and TDM capacities.
Note: in case of bonding configurations, it represents the sum of the max speeds
of all Carrier Terminatio…

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.3

xfCGIfRCNum

Number of Carrier Termination members belonging to the CG group.

Integer32

Constraints:
range: 1-16

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.4

xfCGIfAlarms

This object shows CG i/f related alarms.

Bits

Enumerated Values:

0	hccNe0
1	hccNe1
2	hccNe2
3	rltId0
4	rltId1
5	rltId2
6	txSwitchover0
7	txSwitchover1
8	txSwitchover2
9	remoteTxSwitchOver0
10	remoteTxSwitchOver1
11	remoteTxSwitchOver2
12	unableToProtect0
13	unableToProtect1
14	unableToProtect2
15	rfInputThresholdProtection0
16	rfInputThresholdProtection1
17	rfInputThresholdProtection2
18	unableToProtectEqp0
19	unableToProtectEqp1
20	unableToProtectEqp2

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.5

xfCGIfHopViewStatus

This object represents the Hop View status.
Up: Far-End is reachable
Down: Far-End not reachable

The status is related to HCC-NE alarm.

Enumeration

Enumerated Values:

1	other
2	down
3	up

.1.3.6.1.4.1.193.81.3.4.5.1.9.1.6

xfXPICPairTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.10 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfXPICPairTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfXPICPairTable'

This table is used to enable XPIC (Admid Status) and set the CT pair in XPIC.

xfXPICPairEntry row .1.3.6.1.4.1.193.81.3.4.5.1.10.1

An entry in the xfXPICPairTable.

Indexes

ENTITY-MIBentLogicalIndex xfXpicPairIndex

Column Syntax OID

xpicPairEntLogicalIIndex

It represents the entLogicalIndex of the Radio Link Terminal (RLT).
The logical entity identified by xpicPairEntLogicalIIndex is the same
entity as identified by the same value of entLogicalIndex.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.1

xfXPICPairAdminStatus

Administrative status of XPIC pair.
Default value: disable.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.2

xfXPICPairNumber

It specifies the number used for identification of the XPIC pair.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.3

xfXPICPairRecovery

It allows to enable/disable the recovery procedure when XPIC mode is enabled.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.4

xfXPICPairRestore

Restore XPIC functionality after XPIC recovery has been triggered and resets
XPIC Auto Restore procedure

Enumerationr/w

Enumerated Values:

1	other
2	xpicNoRestore
3	xpicRestore

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.5

xfXPICCTmember1

It specifies the first Carrier Termination (CT) member of the XPIC pair.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.6

xfXPICCTmember2

It specifies the second Carrier Termination (CT) member of the XPIC pair.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.7

xfXPICAutoRestore

It enable/disables the XPIC Auto Recovery procedure.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.8

xfXpicPairIndex

It represents the table second index and is used to index the XPIC pair associated
to Radio Link Terminal (RLT) with entLogicalIndex equal to xpicPairEntLogicalIIndex.
It has been introduce to support configurations lik…

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.193.81.3.4.5.1.10.1.9

xfMIMOGroupTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.11 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfMIMOGroupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfMIMOGroupTable'

This table is used to enable MIMO (Admid Status) and set the CTs in MIMO group.

xfMIMOGroupEntry row .1.3.6.1.4.1.193.81.3.4.5.1.11.1

An entry in the xfMIMOGroupTable.

Indexes

ENTITY-MIBentLogicalIndex

Column Syntax OID

mimoGroupEntLogicalIIndex

It represents the entLogicalIndex of the Radio Link Terminal (RLT).
The logical entity identified by mimoGroupEntLogicalIIndex is the same
entity as identified by the same value of entLogicalIndex.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.1

xfMIMOGroupAdminStatus

Administrative status of MIMO group.
Default value: disable.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.2

xfMIMOGroupNumber

It specifies the Number used for identification of the MIMO group.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.3

xfMIMOGroupRecovery

It allows to enable/disable the recovery procedure when MIMO mode is enabled.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.4

xfMIMOGroupRestore

Restore MIMO functionality after MIMO recovery has been triggered.

Enumerationr/w

Enumerated Values:

1	other
2	mimoNoRestore
3	mimoRestore

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.5

xfMIMOCTmember1

It specifies the first Carrier Termination (CT) member of the MIMO group.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.6

xfMIMOCTmember2

It specifies the second Carrier Termination (CT) member of the MIMO group.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.7

xfMIMOCTmember3

It specifies the third Carrier Termination (CT) member of the MIMO group.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.8

xfMIMOCTmember4

It specifies the forth Carrier Termination (CT) member of the MIMO group.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.11.1.9

xfRLWANIfTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.12 · 1 row entry · 9 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLWANIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLWANIfTable'

This table is used to handle the RL-WAN i/f.

xfRLWANIfEntry row .1.3.6.1.4.1.193.81.3.4.5.1.12.1

An entry in the xfRLWANIfTable.

Indexes

xfRLWANIfIndex

Column Syntax OID

xfRLWANIfIndex

It is the table index.
It contains the ifIndex value of the WAN interface.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.1

xfRLWANDistinguishedName

It is the name uniquely identifying the RL-WAN interface within the system, i.e. R/S/P.

SNMPv2-TCDisplayString

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.2

xfRLWANCompAdminStatus

It enables and disables MLHC and PLC on the RL-WAN interface.

down(2): both MLHC and PLC are disabled.
mlhcUp(3): only MLHC is enabled.
mlhcPlcUp(4): both MLHC and PLC are enabled.
Default:down(2).
…

Enumerationr/w

Enumerated Values:

1	other
2	down
3	mlhcUp
4	mlhcPlcUp

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.3

xfRLWANCompConnStatus

It specifies if the compression building block is physically connected to the RL-WAN interface.
Physical connection of the compression building block to the RL-WAN interface is pre-requisite for enabling compression.
…

Enumeration

Enumerated Values:

1	other
2	disconnected
3	connected

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.4

xfRLWANMlhcMplsMode

It specifies the wanted mpls mode.
mplsOnly(2): Ethernet customer bridge, provider bridge and QinQ headers, including MPLS labels (up to 3) are compressed.
controlWord(3): L2 VPN with Pseudo-Wire Control Word headers ar…

Enumerationr/w

Enumerated Values:

1	other
2	mplsOnly
3	controlWord
4	l2
5	l3

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.5

xfRLWANMlhcOperStatus

Multi-Layer Header Compression operative status.

Enumeration

Enumerated Values:

1	other
2	down
3	up

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.6

xfRLWANPlcOperStatus

Payload Compression operative status.

Enumeration

Enumerated Values:

1	other
2	down
3	up

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.7

xfRLWANActualCapacity

Actual Capacity (speed) of RL WAN interface, in bps.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.8

xfRLWANLimitedCapacity

Capacity (speed) limited by license of RL WAN interface, in bps.

SNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.193.81.3.4.5.1.12.1.9

xfRLTHierarchyModuleTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.13 · 1 row entry · 11 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLTHierarchyModuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLTHierarchyModuleTable'

This table is used to handle Module (MMU - RAU) hierarchy for the specific RLT.

xfRLTHierarchyModuleEntry row .1.3.6.1.4.1.193.81.3.4.5.1.13.1

An entry in the xfRLTHierarchyModuleTable.

Indexes

xfRLTMHIndex xfRLTModuleIndex

Column Syntax OID

xfRLTMHIndex

It is the table index.
It contains the entPhisycalIndex of the WAN port associated to the RLT.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.1

xfRLTModuleIndex

It is the table index.
It is a sequential number referred to the module (entity), either MMU or RAU, constituting the RLT.

Integer32

Constraints:
range: 1-1000

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.2

xfRLTEntPhysicalIndex

This MO represents the value of entPhysicalIndex of the module, either MMU or RAU,
constituting the RLT.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.3

xfRLTPhysicalCointainedIn

This MO represents the value of entPhysicalIndex for the physical entity which
'contains' this physical entity, which is either MMU or RAU (constituting the RLT).

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.4

xfRLTPhysicalParentRelPos

This MO represents the indication of the relative position of this 'child'
component among all its 'sibling' components.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.5

xfRLTEntityPhysicalDescr

This MO represents a textual description of physical entity (module),
either MMU or RAU, constituting the RLT.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.6

xfRLTModuleSlotPosition

This MO represents the slot position of the physical entity (module),
either MMU or RAU, constituting the RLT.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.7

xfRLTFEDistinguishedName

This MO represents the distinguished name of the Near-End logical entity,
either RLT or CT.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.8

xfRLTNEDistinguishedName

This MO represents the distinguished name of the Far-End logical entity,
either RLT or CT.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.9

xfRLTInterfaceIndex

This MO represents the value of ifIndex of the interface, either CG IF (Bonding/RLP) or RAU IF,
constituting the RLT.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.10

xfRLTHighestSeverityAlarm

This MO reports the highest severity of the alarms active in the physical module, MMU or RAU, it refers to.
Value list:
- critical(0): highest severity is Critical;
- major(1): highest severity is Major;
- m…

Enumeration

Enumerated Values:

0	critical
1	major
2	minor
3	warning
4	clear

.1.3.6.1.4.1.193.81.3.4.5.1.13.1.11

xfRLTProtectionTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.14 · 1 row entry · 12 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLTProtectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLTProtectionTable'

This table is used to handle RL Protection for the RLT whose mode is set 1+1RLP.

xfRLTProtectionEntry row .1.3.6.1.4.1.193.81.3.4.5.1.14.1

An entry in the xfRLTProtectionTable.

Indexes

xfRLTProtIndex

Column Syntax OID

xfRLTProtIndex

It is the table index.
It contains the entity logical index of the RLT configured in 1+1RLP.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.1

xfRLTProtectionSwitchMode

The mode in which the switching mechanism is configured.
Auto: System automatically switches from the degraded to the other transmitter (Tx).
Manual: Automatic switching is disabled and operator can select Tx manually…

Enumerationr/w

Enumerated Values:

1	other
2	auto
3	manual
4	autoRevertive
5	txSwitchDisable

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.2

xfRLTProtectionStatus

Status of the protection, when configured in a protected mode.
Values:
- unprotected;
- protected
- unableToProtect

Note:
Applicable only when RLT-mode is RL protection.

Enumeration

Enumerated Values:

1	other
2	unprotected
3	protected
4	unableToProtect

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.3

xfRLTRevertivePreferredTX

It specifies the preferred TX Radio Carrier Termination (CT) in revertive protection mode.
The member is identified by the CT distinguished name (R/S/P).

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-31

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.4

xfRLTProtectionWaitToRestoreTime

The time, in # of seconds, to wait before switching back to the preferred Tx in Auto & Revertive mode.

Default: 0.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.5

xfRLTFadeNotificationTimer

Notifications for alarms caused by fading, with a duration less than the specified time (0 - 1000 seconds) are not sent.
Only applicable for protected configurations.

Default: 200.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.6

xfRLTManualSwitchCommand

Used to request a TX switch-over.
Applicable for protected configurations and when protectionSwitchMode is set to Manual.
Not Applicable for RLT mode RLB

Value:
- txManualSwitch
- txManualNoSwitch.

Enumerationr/w

Enumerated Values:

1	other
2	txManualSwitch
3	txManualNoSwitch

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.7

xfRLTTxSwitchOverConfiguration

Enable or disable the function to switch TX on a request from far-end, including also the TX switchover alarm notifications , both local and remote. Only applicable in RLT mode RLP.

Values:
- notSupported…

Enumerationr/w

Enumerated Values:

1	other
2	notSupported
3	enable
4	disable
5	enableLocal

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.8

xfRLTTxSwitchOverAlarmReset

Used to manual reset the TX switch-over alarm and Remote TX switchover alarm (consequently to TX switch ordered from far-end).
Note: the alarm is raised when TX Switch far-end function is enabled (xfRLTTxSwitchOverConfi…

Enumerationr/w

Enumerated Values:

1	other
2	txSwitchOverAlarmNoReset
3	txSwitchOverAlarmReset

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.9

xfRLTNumOfRLPSwitch

It represents the number of RLP Radio TX switch.

Integer32

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.10

xfRLTEnhancedACMProtectionMode

It configures the enhanced ACM protection mode. The enhanced ACM protection uses RX indicators from both the working and the protection links
to select an ACM profile to optimize capacity (throughput) and/or protection …

Enumerationr/w

Enumerated Values:

1	other
2	activeTransmitter
3	maximumCapacity
4	maximumProtection

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.11

xfRLTEnhancedACMProtectionOperStatus

Status of the enhanched ACM protection engine, when ACM engine is configured either in maximum-troughtput or maximum-protection mode.

Values:
- notApplicable : when enhanced ACM protection mode is ba…

Enumeration

Enumerated Values:

1	other
2	notApplicable
3	enhAcmProtActive
4	enhAcmProtNotActive

.1.3.6.1.4.1.193.81.3.4.5.1.14.1.12

xfRLTEncryptionTable

table

.1.3.6.1.4.1.193.81.3.4.5.1.15 · 1 row entry · 4 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLTEncryptionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLTEncryptionTable'

This table is used to handle Radio Link Encryption.

xfRLTEncryptionEntry row .1.3.6.1.4.1.193.81.3.4.5.1.15.1

An entry in the xfRLTEncryptionTable.

Indexes

xfRLTEncryptionIndex

Column Syntax OID

xfRLTEncryptionIndex

It represents the xfRLTEncryptionTable index and is the RLT entity logical index.

Integer32

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.193.81.3.4.5.1.15.1.1

xfRLTEncryptionAdminStatus

This MO allows to enable/disable the Encryption of both control and traffic plain over the Radio Link hop.
Values:
- enable;
- disable.

Default: DISABLE.

Enumerationr/w

Enumerated Values:

1	other
2	enable
3	disable

.1.3.6.1.4.1.193.81.3.4.5.1.15.1.2

xfRLTEncryptionOperStatus

This MO represents the Operative Status of the Encryption function over the Radio Link hop
and refers to receiving direction. Therefore, it indicates if the receiving side is able or
not able to correctly/successfully d…

Enumeration

Enumerated Values:

1	other
2	up
3	down

.1.3.6.1.4.1.193.81.3.4.5.1.15.1.3

xfRLTEncryptionMasterKey

This MO allows to define the Master Key used to initiate the Encryption operation.
Master Key is hidden.

SNMPv2-TCDisplayStringr/w

Constraints:
range: 0-63

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.193.81.3.4.5.1.15.1.4

xfRLPMContinuousCounterTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.1 · 1 row entry · 10 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMContinuousCounterTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMContinuousCounterTable'

Table for RLT performance data.

xfRLPMContinuousCounterEntry row .1.3.6.1.4.1.193.81.3.4.5.2.1.1

An entry in the xfRLPMContinuousCounterTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMTimeElapsed

The number of seconds that have elapsed since the beginning
of the current error-measurement period.
If the current interval exceeds the maximum
value, the agent will return the maximum value.
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.1

xfPMCurrentES

This object shows the errored seconds.
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.2

xfPMCurrentSES

This object shows the severely errored seconds.
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.3

xfPMCurrentBBE

This object shows the background block errors.
Reset by xfPMPerfReset.

HC-PerfHist-TC-MIBHCPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.4

xfPMCurrentUAS

This object shows the unavailable seconds (or unavailable time).
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.5

xfPMCurrentBB

This object shows the background blocks.
Reset by xfPMPerfReset.

HC-PerfHist-TC-MIBHCPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.6

xfPMPerfReset

This object is used to reset the performance counters:
- Elapsed Time, ES, SES, BBE, BB
- PM ACM
- ETSI - EN 301 129 (TLTS, RLTS, ...) current/interval 15m/24h
- Max and Min XPI/MSE current/interval 15m/…

Enumerationr/w

Enumerated Values:

1	other
2	noReset
3	reset

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.7

xfPMCurrentESR

The ratio of ES to total seconds in available time during a
fixed measurement interval.
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.8

xfPMCurrentSESR

The ratio of SES to total seconds in available time
during a fixed measurement interval.
Reset by xfPMPerfReset.

PerfHist-TC-MIBPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.9

xfPMCurrentBBER

The ratio of Background Block Errors (BBE) to total blocks in
available time during a fixed measurement interval.
Reset by xfPMPerfReset.

HC-PerfHist-TC-MIBHCPerfCurrentCount

.1.3.6.1.4.1.193.81.3.4.5.2.1.1.10

xfRLPMACMConfigTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.2 · 1 row entry · 5 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMACMConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMACMConfigTable'

Alarm threshold values for RL PM.

xfRLPMACMConfigEntry row .1.3.6.1.4.1.193.81.3.4.5.2.2.1

Entry in the xfRLPMACMConfigTable

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMACMSetThreshold15m

The 15 minute set threshold for minimum modulation.
Near end access: read-write.
Far end access: no access.
Default value is 180.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.2.2.1.1

xfPMACMSetThreshold24h

The 24 hour set threshold for minimum modulation.
Near end access: read-write.
Far end access: no access.
Default value is 1500.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.2.2.1.2

xfPMACMResetThreshold15m

The 15 minute reset threshold for minimum modulation.
Near end access: read-write.
Far end access: no access.
Default value is 20.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.193.81.3.4.5.2.2.1.3

xfPMACMStatus

It reports threshold crossing alarm status:
- acm15m: ACM 15 min threshold crossing: ACM has been in the lowest configured profile
for a number of seconds exceeding the configured 15 min threshold.
- acm24h: A…

Bits

Enumerated Values:

0	acm15m0
1	acm15m1
2	acm15m2
3	acm24h0
4	acm24h1
5	acm24h2

.1.3.6.1.4.1.193.81.3.4.5.2.2.1.4

xfPMACMValidData

It reports which ACM's PM data are valid.

Bits

Enumerated Values:

0	valid15m4QAMStrong
1	valid15m4QAMStd
2	valid15m4QAMLight
3	valid15m16QAMStrong
4	valid15m16QAMStd
5	valid15m16QAMLight
6	valid15m32QAMStrong
7	valid15m32QAMStd
8	valid15m32QAMLight
9	valid15m64QAMStrong
10	valid15m64QAMStd
11	valid15m64QAMLight
12	valid15m128QAMStrong
13	valid15m128QAMStd
14	valid15m128QAMLight
15	valid15m256QAMStrong
16	valid15m256QAMStd
17	valid15m256QAMLight
18	valid15m512QAMStrong
19	valid15m512QAMStd
20	valid15m512QAMLight
21	valid15m1024QAMStrong
22	valid15m1024QAMStd
23	valid15m1024QAMLight
24	valid15m2048QAMStrong
25	valid15m2048QAMStd
26	valid15m2048QAMLight
27	valid15m4096QAMStrong
28	valid15m4096QAMStd
29	valid15m4096QAMLight
30	valid15m8192QAMStrong
31	valid15m8192QAMStd
32	valid15m8192QAMLight
33	valid15m16384QAMStrong
34	valid15m16384QAMStd
35	valid15m16384QAMLight

.1.3.6.1.4.1.193.81.3.4.5.2.2.1.5

xfRLPMACMCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.3 · 1 row entry · 36 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMACMCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMACMCurrent24hTable'

ACM-based counters for current 24h table.

xfRLPMACMCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.5.2.3.1

Entry in the xfRLPMACMCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMACMCurrent24h4QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.1`
xfPMACMCurrent24h4QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.2`
xfPMACMCurrent24h4QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.3`
xfPMACMCurrent24h16QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.4`
xfPMACMCurrent24h16QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.5`
xfPMACMCurrent24h16QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.6`
xfPMACMCurrent24h32QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.7`
xfPMACMCurrent24h32QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.8`
xfPMACMCurrent24h32QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.9`
xfPMACMCurrent24h64QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.10`
xfPMACMCurrent24h64QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.11`
xfPMACMCurrent24h64QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.12`
xfPMACMCurrent24h128QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.13`
xfPMACMCurrent24h128QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.14`
xfPMACMCurrent24h128QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.15`
xfPMACMCurrent24h256QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.16`
xfPMACMCurrent24h256QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.17`
xfPMACMCurrent24h256QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.18`
xfPMACMCurrent24h512QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.19`
xfPMACMCurrent24h512QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.20`
xfPMACMCurrent24h512QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.21`
xfPMACMCurrent24h1024QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.22`
xfPMACMCurrent24h1024QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.23`
xfPMACMCurrent24h1024QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.24`
xfPMACMCurrent24h2048QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.25`
xfPMACMCurrent24h2048QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.26`
xfPMACMCurrent24h2048QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.27`
xfPMACMCurrent24h4096QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.28`
xfPMACMCurrent24h4096QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.29`
xfPMACMCurrent24h4096QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.30`
xfPMACMCurrent24h8192QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.31`
xfPMACMCurrent24h8192QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.32`
xfPMACMCurrent24h8192QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.33`
xfPMACMCurrent24h16384QAMStrong Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.34`
xfPMACMCurrent24h16384QAMStd Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.35`
xfPMACMCurrent24h16384QAMLight Valid time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.3.1.36`

xfRLPMACMInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.4 · 1 row entry · 37 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMACMInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMACMInterval24hTable'

ACM-based counters for interval 24h table.

xfRLPMACMInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.5.2.4.1

Entry in the xfRLPMACMInterval24hTable.

Indexes

IF-MIBifIndex

Column Syntax OID

xfPMACMInterval24h4QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.1

xfPMACMInterval24h4QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.2

xfPMACMInterval24h4QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.3

xfPMACMInterval24h16QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.4

xfPMACMInterval24h16QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.5

xfPMACMInterval24h16QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.6

xfPMACMInterval24h32QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.7

xfPMACMInterval24h32QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.8

xfPMACMInterval24h32QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.9

xfPMACMInterval24h64QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.10

xfPMACMInterval24h64QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.11

xfPMACMInterval24h64QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.12

xfPMACMInterval24h128QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.13

xfPMACMInterval24h128QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.14

xfPMACMInterval24h128QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.15

xfPMACMInterval24h256QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.16

xfPMACMInterval24h256QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.17

xfPMACMInterval24h256QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.18

xfPMACMInterval24h512QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.19

xfPMACMInterval24h512QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.20

xfPMACMInterval24h512QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.21

xfPMACMInterval24h1024QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.22

xfPMACMInterval24h1024QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.23

xfPMACMInterval24h1024QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.24

xfPMACMInterval24h2048QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.25

xfPMACMInterval24h2048QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.26

xfPMACMInterval24h2048QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.27

xfPMACMInterval24h4096QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.28

xfPMACMInterval24h4096QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.29

xfPMACMInterval24h4096QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.30

xfPMACMInterval24hValidData

This variable indicates whether the data for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.31

xfPMACMInterval24h8192QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.32

xfPMACMInterval24h8192QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.33

xfPMACMInterval24h8192QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.34

xfPMACMInterval24h16384QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.35

xfPMACMInterval24h16384QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.36

xfPMACMInterval24h16384QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.4.1.37

xfRLPMACMCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.5 · 1 row entry · 36 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMACMCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMACMCurrent15mTable'

ACM-based counters for current 15m table.

xfRLPMACMCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.5.2.5.1

Entry in the table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMACMCurrent15m4QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.1`
xfPMACMCurrent15m4QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.2`
xfPMACMCurrent15m4QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.3`
xfPMACMCurrent15m16QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.4`
xfPMACMCurrent15m16QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.5`
xfPMACMCurrent15m16QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.6`
xfPMACMCurrent15m32QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.7`
xfPMACMCurrent15m32QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.8`
xfPMACMCurrent15m32QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.9`
xfPMACMCurrent15m64QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.10`
xfPMACMCurrent15m64QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.11`
xfPMACMCurrent15m64QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.12`
xfPMACMCurrent15m128QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.13`
xfPMACMCurrent15m128QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.14`
xfPMACMCurrent15m128QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.15`
xfPMACMCurrent15m256QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.16`
xfPMACMCurrent15m256QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.17`
xfPMACMCurrent15m256QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.18`
xfPMACMCurrent15m512QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.19`
xfPMACMCurrent15m512QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.20`
xfPMACMCurrent15m512QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.21`
xfPMACMCurrent15m1024QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.22`
xfPMACMCurrent15m1024QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.23`
xfPMACMCurrent15m1024QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.24`
xfPMACMCurrent15m2048QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.25`
xfPMACMCurrent15m2048QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.26`
xfPMACMCurrent15m2048QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.27`
xfPMACMCurrent15m4096QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.28`
xfPMACMCurrent15m4096QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.29`
xfPMACMCurrent15m4096QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.30`
xfPMACMCurrent15m8192QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.31`
xfPMACMCurrent15m8192QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.32`
xfPMACMCurrent15m8192QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.33`
xfPMACMCurrent15m16384QAMStrong Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.34`
xfPMACMCurrent15m16384QAMStd Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.35`
xfPMACMCurrent15m16384QAMLight Valid interval time since reset.	PerfHist-TC-MIBPerfCurrentCount	`.1.3.6.1.4.1.193.81.3.4.5.2.5.1.36`

xfRLPMACMInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.6 · 1 row entry · 38 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMACMInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMACMInterval15mTable'

ACM-based counters for interval 15m table.

xfRLPMACMInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.5.2.6.1

Entry in the table.

Indexes

IF-MIBifIndex xfPMACMInterval15mIntervalNumber

Column Syntax OID

xfPMACMInterval15mIntervalNumber

A number between 1 and 96, which identifies the interval for which
the set of statistics is available. The interval identified by 1
is the most recently completed 15 minute interval, and the interval
identified by N is …

Integer32

Constraints:
range: 1-96

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.1

xfPMACMInterval15m4QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.2

xfPMACMInterval15m4QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.3

xfPMACMInterval15m4QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.4

xfPMACMInterval15m16QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.5

xfPMACMInterval15m16QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.6

xfPMACMInterval15m16QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.7

xfPMACMInterval15m32QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.8

xfPMACMInterval15m32QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.9

xfPMACMInterval15m32QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.10

xfPMACMInterval15m64QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.11

xfPMACMInterval15m64QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.12

xfPMACMInterval15m64QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.13

xfPMACMInterval15m128QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.14

xfPMACMInterval15m128QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.15

xfPMACMInterval15m128QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.16

xfPMACMInterval15m256QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.17

xfPMACMInterval15m256QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.18

xfPMACMInterval15m256QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.19

xfPMACMInterval15m512QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.20

xfPMACMInterval15m512QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.21

xfPMACMInterval15m512QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.22

xfPMACMInterval15m1024QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.23

xfPMACMInterval15m1024QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.24

xfPMACMInterval15m1024QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.25

xfPMACMInterval15m2048QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.26

xfPMACMInterval15m2048QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.27

xfPMACMInterval15m2048QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.28

xfPMACMInterval15m4096QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.29

xfPMACMInterval15m4096QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.30

xfPMACMInterval15m4096QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.31

xfPMACMInterval15mValidData

This variable indicates whether the data for this interval is valid.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.32

xfPMACMInterval15m8192QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.33

xfPMACMInterval15m8192QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.34

xfPMACMInterval15m8192QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.35

xfPMACMInterval15m16384QAMStrong

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.36

xfPMACMInterval15m16384QAMStd

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.37

xfPMACMInterval15m16384QAMLight

Interval count.

PerfHist-TC-MIBPerfIntervalCount

.1.3.6.1.4.1.193.81.3.4.5.2.6.1.38

xfRLPMMimoCurrentTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.7 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMMimoCurrentTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMMimoCurrentTable'

Table for RLT MIMO Current performance data.

xfRLPMMimoCurrentEntry row .1.3.6.1.4.1.193.81.3.4.5.2.7.1

An entry in the xfRLPMMimoCurrentTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMPerfCurrentEta Performance Monitoring for Current MIMO Eta Value.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.7.1.1`
xfPMPerfEtaMinLast7days Indicate ETA Min level for the last 7 days.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.7.1.2`
xfPMPerfEtaMaxLast7days Indicate ETA Max level for the last 7 days.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.7.1.3`

xfRLPMMimoCurrent24hTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.8 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMMimoCurrent24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMMimoCurrent24hTable'

Counters for Eta in current 24h.

xfRLPMMimoCurrent24hEntry row .1.3.6.1.4.1.193.81.3.4.5.2.8.1

Entry in the xfRLPMMimoCurrent24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMPerfCurrent24hElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.5.2.8.1.1`
xfPMPerfCurrent24hEtaMin Performance Monitoring for MIMO Eta Min Value in Current 24h.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.8.1.2`
xfPMPerfCurrent24hEtaMax Performance Monitoring for Current MIMO 24h Eta Max Value.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.8.1.3`

xfRLPMMimoInterval24hTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.9 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMMimoInterval24hTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMMimoInterval24hTable'

Performance Monitoring for MIMO Eta Min Value in Interval of 24h.

xfRLPMMimoInterval24hEntry row .1.3.6.1.4.1.193.81.3.4.5.2.9.1

Entry in the xfRLPMMimoInterval24hTable.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMPerfInterval24hValidData This variable indicates whether the data for this interval is valid.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.9.1.1`
xfPMPerfInterval24hEtaMin Performance Monitoring for MIMO Eta Min Value in Interval of 24h.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.9.1.2`
xfPMPerfInterval24hEtaMax Performance Monitoring for MIMO Eta Max Value in Interval of 24h.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.9.1.3`

xfRLPMMimoCurrent15mTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.10 · 1 row entry · 3 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMMimoCurrent15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMMimoCurrent15mTable'

Counters for Eta MIMO Current 15m table.

xfRLPMMimoCurrent15mEntry row .1.3.6.1.4.1.193.81.3.4.5.2.10.1

Entry in the table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
xfPMPerfCurrent15mElapsedTime The number of seconds that have elapsed since the beginning of the current error-measurement period	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.193.81.3.4.5.2.10.1.1`
xfPMPerfCurrent15mEtaMin Performance Monitoring for MIMO Eta Min Value in Current 15m.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.10.1.2`
xfPMPerfCurrent15mEtaMax Performance Monitoring for MIMO Eta Max Value in Current 15m.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.10.1.3`

xfRLPMMimoInterval15mTable

table

.1.3.6.1.4.1.193.81.3.4.5.2.11 · 1 row entry · 4 columns

Open in standard view

Uses the ericsson variant from /opt/observium/mibs/ericsson.

Command help

Walk xfRLPMMimoInterval15mTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-RLT-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-RLT-MIB::xfRLPMMimoInterval15mTable'

Counters for Eta MIMO for Interval 15m.

xfRLPMMimoInterval15mEntry row .1.3.6.1.4.1.193.81.3.4.5.2.11.1

Entry in the table.

Indexes

IF-MIBifIndex xfPMPerfInterval15mIntervalNumber

Column	Syntax	OID
xfPMPerfInterval15mIntervalNumber A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is …	Integer32 Constraints: `range: 1-96`	`.1.3.6.1.4.1.193.81.3.4.5.2.11.1.1`
xfPMPerfInterval15mEtaMin Performance Monitoring for MIMO Eta Min Value in Interval 15m.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.11.1.2`
xfPMPerfInterval15mEtaMax Performance Monitoring for MIMO Eta Max Value in Interval 15m.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.11.1.3`
xfPMPerfInterval15mValidData This variable indicates whether the data for this interval is valid.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.193.81.3.4.5.2.11.1.4`