Standard view Table view

XF-RADIOLINK-PTP-MODEM-MIB

Recognized by Observium 
        
This MIB defines objects for point-to-point Radiolink modems ().
Observium recognizes this MIB
Observium uses this MIB to identify device capabilities or determine applicability.
Explore Observium network monitoring
Source file
XF-RADIOLINK-PTP-MODEM-MIB
Last revised
Identity
xfRadioLinkPtpModemMIB
Base OID
1.3.6.1.4.1.193.81.3.4.2
Imported Objects
ENTITY-MIB entPhysicalIndex
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Integer32 MODULE-IDENTITY OBJECT-TYPE
SNMPv2-TC TEXTUAL-CONVENTION
XF-RADIOLINK-PTP-TERMINAL-MIB xfTermRowIndex
XF-TOP-MIB xfRadioLink
Net-SNMP examples using the ericsson MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'XF-RADIOLINK-PTP-MODEM-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'XF-RADIOLINK-PTP-MODEM-MIB::xfRadioLinkPtpModemMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XF-RADIOLINK-PTP-MODEM-MIB' -M '/opt/observium/mibs/ericsson:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XF-RADIOLINK-PTP-MODEM-MIB::xfRadioLinkPtpModemMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (38)
xfRadioLinkPtpModemMIB
.1.3.6.1.4.1.193.81.3.4.2
xfRadioLinkPtpModemObjects
.1.3.6.1.4.1.193.81.3.4.2.1
xfModemTable
.1.3.6.1.4.1.193.81.3.4.2.1.1
xfModemEntry
ENTITY-MIBentPhysicalIndex
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1
xfMMUAlarmStatus
MMUAlarmStatus
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.1
xfMMUChannelCompanionIndex
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.10
xfMMUInterfaceCapability
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.11
xfMMURAUSupplyVoltage
Enumeration
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.12
xfMMUModIndexNotValid obsolete
MMUModIndexStatus
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.2
xfMMUAtpcCapability
MMUAtpcCapability
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.3
xfMMUModCapability
MMUModCapability
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.4
xfMMUCapacityCapability
MMUCapCapability
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.5
xfMMUProtectionPath
Enumeration
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.6
xfMMUSlotPosition
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.7
xfMMUChannelModeCapability
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.8
xfMMUChannelCompanionSlot r/w
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.1.1.9
xfRAUIFTable
.1.3.6.1.4.1.193.81.3.4.2.1.2
xfRAUIFEntry
IF-MIBifIndex
 .1.3.6.1.4.1.193.81.3.4.2.1.2.1
xfRAUIFLoopEnable r/w
Enumeration
 .1.3.6.1.4.1.193.81.3.4.2.1.2.1.1
xfRAUIFRxLoop r/w
Enumeration
 .1.3.6.1.4.1.193.81.3.4.2.1.2.1.2
xfRAUIFAlarms
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.2.1.3
xfRAUIFStatus
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.2.1.4
xfLINERSTable
.1.3.6.1.4.1.193.81.3.4.2.1.3
xfLINERSEntry
IF-MIBifIndex
 .1.3.6.1.4.1.193.81.3.4.2.1.3.1
xfLINERSAlarms
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.3.1.1
xfModemCapabilityTable
.1.3.6.1.4.1.193.81.3.4.2.1.4
xfModemCapabilityEntry
ENTITY-MIBentPhysicalIndexXF-RADIOLINK-PTP-TERMINAL-MIBxfTermRowIndex
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1
xfMMUChannelSpacing
MMUChannelSpacingCapability
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.1
xfMMUChannelModulation
ModemModulation
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.2
xfMMUMaxTribCapacity
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.3
xfMMUDCNCapacity
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.4
xfMMUMaxCapacity
SNMPv2-SMIInteger32
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.5
xfMMUFrameFormatType
MMUFrameFormatType
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.6
xfMMUFrameFormatRev
Enumeration
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.7
xfMMUBerAlarmThresholdCapability
Bits
 .1.3.6.1.4.1.193.81.3.4.2.1.4.1.8
xfRadioLinkPtpModemConformance
.1.3.6.1.4.1.193.81.3.4.2.2
xfRadioLinkPtpModemCompliances
.1.3.6.1.4.1.193.81.3.4.2.2.1
xfRadioLinkPtpModemGroups
.1.3.6.1.4.1.193.81.3.4.2.2.2
Dependencies (14) 7 direct · 7 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANA-ENTITY-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMP-FRAMEWORK-MIBrfc
  6. UUID-TC-MIBrfc
  7. ENTITY-MIBrfc
  8. IANAifType-MIBrfc
  9. SNMPv2-MIBrfc
  10. IF-MIBrfc
  11. HC-PerfHist-TC-MIBrfc
  12. PerfHist-TC-MIBrfc
  13. XF-TOP-MIBericsson
  14. XF-RADIOLINK-PTP-TERMINAL-MIBericsson
  15. XF-RADIOLINK-PTP-MODEM-MIBericssonselected
Type Definitions (8)
MMUAlarmStatus
Bits
rcc0(0)
rcc1(1)
rcc2(2)
icc0(3)
icc1(4)
icc2(5)
atpcCapabilityAlarmFarEnd0(6)
atpcCapabilityAlarmFarEnd1(7)
atpcCapabilityAlarmFarEnd2(8)
hcc0(9)
hcc1(10)
hcc2(11)
xpicCable0(12)
xpicCable1(13)
xpicCable2(14)
xpicLos0(15)
xpicLos1(16)
xpicLos2(17)
interMMUChannelFailure0(18)
interMMUChannelFailure1(19)
interMMUChannelFailure2(20)
runningConfigNotAccepted0(21)
runningConfigNotAccepted1(22)
runningConfigNotAccepted2(23)
defaultConfigNotAccepted0(24)
defaultConfigNotAccepted1(25)
defaultConfigNotAccepted2(26)
syncOverRLNotSupported0(27)
syncOverRLNotSupported1(28)
syncOverRLNotSupported2(29)
rauPowerSupplyChanged0(30)
rauPowerSupplyChanged1(31)
rauPowerSupplyChanged2(32)
congestionControlNotSupported0(33)
congestionControlNotSupported1(34)
congestionControlNotSupported2(35)
This TC enumerates the the alarm status.
RCC - Communication is lost on the Radio Communication Channel,
between the MMU and RAU. RCC alarm for the modem will generate hardware
error for the radio (which will lead to radio operational status out of service).
ICC - Communication is lost on the Internal Communication Channel,
between two MMU2B or between the MMU2 and SMU2, in the same
terminal.
ATPCCapabilityAlarmFarEnd - The terminal on the far end is configured
for ATPC, but at least one of the indoor units does not support
ATPC.
HCC - Communication is lost on the Hop Communication Channel,
between the MMU and the far end MMU.

XPICCable - Disconnection of the XPIC cross-cable carrying the baseband signal
received in one polarization, e.g. V, to the XPU board of the other
polarization, i.e. H if the other is V.

XPICLos - The loss of the XPIC baseband cross-signal with cross-cable connected.

interMMUChannelFailure - High level fault on inter MMU communication of RS.
Only valid in protection.

runningConfigNotAccepted - The MMU/RAU/SFP couldn.t accept the running configuration;
the service LED is flashing.

defaultConfigNotAccepted - Default config not accepted.

syncOverRLNotSupported - Current MMU, once provisioned as having sync over RL, does not support sync over RL.

rauPowerSupplyChanged - RAU power supply has changed automatically due to undervoltage or bad grounding detection.

congestionControlNotSupported - Far-end (i.e. CN) congestion control is not supported by modem; the service LED is flashing.


Alarm status is indicated by 24 bits
MMUAtpcCapability
Enumeration
other(1)
noAtpcSupport(2)
doesNotExist(3)
atpcCapabilityUnknown(4)
supportsAtpc(5)
supportsAtpcFallback(6)
supportsAtpcFallbackTimer(7)
This TC enumerates atpc capabilities values
codes
MMUCapCapability
Bits
oneE1(0)
twoE1(1)
fourE1(2)
oneE2(3)
twoE2(4)
oneE3oneE1(5)
twoE3(6)
fourE3(7)
fourDS1(8)
eightDS1(9)
sixteenDS1(10)
seventeenDS1(11)
stm0(12)
stm1(13)
thirtytwoDS1(14)
stm1DS1(15)
stm150MHz(16)
twentytwoE1(17)
thirtyfiveE1(18)
fortysixE1(19)
seventyfiveE1(20)
oneStm1OneJ1(21)
sixtynineDS1(22)
eightyDS1(23)
This TC enumerates capacity capabilities values. Capacity
capabilities is indicated by 15 bits
MMUChannelSpacingCapability
Enumeration
chspUnknown(0)
chsp7MHz(1)
chsp14MHz(2)
chsp20MHz(3)
chsp28MHz(4)
chsp30MHz(5)
chsp40MHz(6)
chsp50MHz(7)
chsp56MHz(8)
chsp10MHz(9)
chsp3500kHz(10)
Channel spacing capability
MMUFrameFormatType
Enumeration
fftUnknown(0)
fftStatic(1)
fftAdMod(2)
fftXpic(3)
fftXpicAdmod(4)
fftLegacy(5)
fftStaticLH(6)
fftAdmodLH(7)
fftXpicLH(8)
fftXpicAdmodLH(9)
Frame format type.

Values:
fftUnknown(0)
fftStatic(1)
fftAdmod(2)
fftXpic(3)
fftXpicAdmod(4)
fftLegacy(5)
fftStaticLH(6)
fftAdmodLH(7)
fftXpicLH(8)
fftXpicAdmodLH(9)
MMUModCapability
Bits
cqpsk(0)
qam16(1)
qam128(2)
qam32(3)
qam64(4)
This TC enumerates the modulation capabilities.
Modulation capabilities is indicated by 5 bits:
bits 01234
00000 undetermined
00001 C-QPSK
00010 16-QAM
00011 C-QPSK & 16-QAM
00100 128-QAM
01000 32-QAM
10000 64-QAM
...
11111 C-QPSK & 16-QAM & 128-QAM & 32-QAM & 64-QAM
MMUModIndexStatus
Enumeration
other(1)
modIndexValid(2)
modIndexNotValid(3)
This TC enumerates modulation index status values
codes
ModemModulation
Enumeration
other(1)
cqpsk(2)
qam16(3)
qam128(4)
qam32(5)
qam64(6)
qam4(7)
qam8(8)
qam256(9)
qam512(10)
qam1024(11)
Type of modulation.
Conformance Groups (1)
xfRadioLinkPtpModemCompleteGroup
xfMMUAlarmStatus xfMMUModIndexNotValid xfMMUAtpcCapability xfMMUModCapability xfMMUCapacityCapability xfMMUProtectionPath xfMMUSlotPosition xfMMUChannelModeCapability xfMMUChannelCompanionSlot xfMMUChannelCompanionIndex xfMMUInterfaceCapability xfRAUIFLoopEnable xfRAUIFRxLoop xfRAUIFAlarms xfRAUIFStatus xfLINERSAlarms xfMMUChannelSpacing xfMMUChannelModulation xfMMUMaxTribCapacity xfMMUDCNCapacity xfMMUMaxCapacity xfMMUFrameFormatType xfMMUFrameFormatRev xfMMURAUSupplyVoltage
A collection of all current objects in this MIB
module.
 .1.3.6.1.4.1.193.81.3.4.2.2.2.1
Compliance Statements (1)

OID .1.3.6.1.4.1.193.81.3.4.2.2.1.1
The compliance statement for SNMP entities which
implement everything.
Required groups
mandatory xfRadioLinkPtpModemCompleteGroup