XEROX-GENERAL-MIB
Version: 5.402.pub
Xerox General MIB
See section 9 'Supplement' of XCMI General TC for
implementation and conformance guidance for this MIB module.
Copyright (C) 1995-2005 Xerox Corporation. All Rights Reserved.
- Source file
XEROX-GENERAL-MIB- Last revised
- Identity
xcmGeneralMIB- Base OID
1.3.6.1.4.1.253.8.51
Imported Objects
| HOST-RESOURCES-MIB | hrDeviceIndex InternationalDisplayString ProductID |
| IANA-CHARSET-MIB | IANACharset |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| XEROX-COMMON-MIB | xeroxCommonMIB |
| XEROX-GENERAL-TC | Cardinal32 CodedCountry CodedLanguage CodeIndexedStringIndex Ordinal16 Ordinal32 XcmFixedLocaleDisplayString XcmGenGroupSupport XcmGenMessageMapStringLabel XcmGenNotifyDetailType XcmGenNotifySchemeSupport XcmGenNotifySeverityFilter XcmGenNotifyTrainingFilter XcmGenOptionValueSyntax XcmGenReconfOptionState XcmGenRowPersistence XcmGenSNMPDomain XcmGenSNMPv2ErrorStatus XcmGenSNMPVersion XcmGlobalUniqueID XcmNamedLocaleUtf8String zeroDotZero |
Net-SNMP examples using the xerox MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'XEROX-GENERAL-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'XEROX-GENERAL-MIB::xcmGeneralMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'XEROX-GENERAL-MIB' -M '/opt/observium/mibs/xerox:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'XEROX-GENERAL-MIB::xcmGeneralMIB'
Objects (185)
Showing 185 of 185 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.0.0.51 |
||
.1.3.6.1.4.1.253.8.51 |
||
.1.3.6.1.4.1.253.8.51.1 |
||
.1.3.6.1.4.1.253.8.51.1.2 |
||
.1.3.6.1.4.1.253.8.51.1.2.1 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.10 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.11 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.12 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.1.2.1.13 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.51.1.2.1.14 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.51.1.2.1.15 |
|
.1.3.6.1.4.1.253.8.51.1.2.1.16 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.17 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.18 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.19 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.1.2.1.20 |
|
.1.3.6.1.4.1.253.8.51.1.2.1.21 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.3 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.5 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.6 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.7 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.8 |
||
.1.3.6.1.4.1.253.8.51.1.2.1.9 |
||
.1.3.6.1.4.1.253.8.51.10 |
||
.1.3.6.1.4.1.253.8.51.10.1 |
||
.1.3.6.1.4.1.253.8.51.10.1.1 |
||
.1.3.6.1.4.1.253.8.51.10.1.1.1 |
||
.1.3.6.1.4.1.253.8.51.10.1.1.2 |
||
.1.3.6.1.4.1.253.8.51.10.1.1.3 |
||
.1.3.6.1.4.1.253.8.51.10.1.2 |
||
.1.3.6.1.4.1.253.8.51.10.1.3 |
||
.1.3.6.1.4.1.253.8.51.10.2 |
||
.1.3.6.1.4.1.253.8.51.10.2.1 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.10 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.11 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.12 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.2 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.51.10.2.1.3 |
|
.1.3.6.1.4.1.253.8.51.10.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.5 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.51.10.2.1.6 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.51.10.2.1.7 |
|
.1.3.6.1.4.1.253.8.51.10.2.1.8 |
||
.1.3.6.1.4.1.253.8.51.10.2.1.9 |
||
.1.3.6.1.4.1.253.8.51.11 |
||
.1.3.6.1.4.1.253.8.51.11.1 |
||
.1.3.6.1.4.1.253.8.51.11.1.1 |
||
.1.3.6.1.4.1.253.8.51.11.1.2 |
||
.1.3.6.1.4.1.253.8.51.11.1.3 |
||
.1.3.6.1.4.1.253.8.51.11.2 |
||
.1.3.6.1.4.1.253.8.51.11.2.1 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.3 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.5 |
||
.1.3.6.1.4.1.253.8.51.11.2.1.6 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.11.2.1.7 |
|
.1.3.6.1.4.1.253.8.51.13 |
||
.1.3.6.1.4.1.253.8.51.13.1 |
||
.1.3.6.1.4.1.253.8.51.13.1.1 |
||
.1.3.6.1.4.1.253.8.51.13.1.2 |
||
.1.3.6.1.4.1.253.8.51.13.2 |
||
.1.3.6.1.4.1.253.8.51.13.2.1 |
||
.1.3.6.1.4.1.253.8.51.13.2.1.1 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.13.2.1.2 |
|
.1.3.6.1.4.1.253.8.51.13.2.1.3 |
||
.1.3.6.1.4.1.253.8.51.13.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.13.2.1.5 |
||
.1.3.6.1.4.1.253.8.51.13.2.1.6 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.13.2.1.7 |
|
.1.3.6.1.4.1.253.8.51.14 |
||
.1.3.6.1.4.1.253.8.51.14.1 |
||
.1.3.6.1.4.1.253.8.51.14.1.1 |
||
.1.3.6.1.4.1.253.8.51.14.1.2 |
||
.1.3.6.1.4.1.253.8.51.14.2 |
||
.1.3.6.1.4.1.253.8.51.14.2.1 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.51.14.2.1.1 |
|
.1.3.6.1.4.1.253.8.51.14.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.14.2.1.3 |
||
.1.3.6.1.4.1.253.8.51.14.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.15 |
||
.1.3.6.1.4.1.253.8.51.15.2 |
||
.1.3.6.1.4.1.253.8.51.15.2.1 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.51.15.2.1.1 |
|
.1.3.6.1.4.1.253.8.51.15.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.16 |
||
.1.3.6.1.4.1.253.8.51.16.2 |
||
.1.3.6.1.4.1.253.8.51.16.2.1 |
||
|
ObjectIdentifier
|
.1.3.6.1.4.1.253.8.51.16.2.1.1 |
|
.1.3.6.1.4.1.253.8.51.16.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.16.2.1.3 |
|
.1.3.6.1.4.1.253.8.51.17 |
||
.1.3.6.1.4.1.253.8.51.17.1 |
||
.1.3.6.1.4.1.253.8.51.17.1.1 |
||
.1.3.6.1.4.1.253.8.51.17.1.2 |
||
.1.3.6.1.4.1.253.8.51.17.2 |
||
.1.3.6.1.4.1.253.8.51.17.2.1 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.10 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.11 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.17.2.1.4 |
|
|
OctetString
|
.1.3.6.1.4.1.253.8.51.17.2.1.5 |
|
.1.3.6.1.4.1.253.8.51.17.2.1.6 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.7 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.8 |
||
.1.3.6.1.4.1.253.8.51.17.2.1.9 |
||
.1.3.6.1.4.1.253.8.51.18 |
||
.1.3.6.1.4.1.253.8.51.18.1 |
||
.1.3.6.1.4.1.253.8.51.18.1.1 |
||
.1.3.6.1.4.1.253.8.51.18.1.2 |
||
.1.3.6.1.4.1.253.8.51.18.2 |
||
.1.3.6.1.4.1.253.8.51.18.2.1 |
||
.1.3.6.1.4.1.253.8.51.18.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.18.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.18.2.1.3 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.18.2.1.4 |
|
.1.3.6.1.4.1.253.8.51.2 |
||
.1.3.6.1.4.1.253.8.51.2.2 |
||
.1.3.6.1.4.1.253.8.51.3 |
||
.1.3.6.1.4.1.253.8.51.3.1 |
||
.1.3.6.1.4.1.253.8.51.3.1.1 |
||
.1.3.6.1.4.1.253.8.51.3.1.1.1 |
||
.1.3.6.1.4.1.253.8.51.3.1.1.2 |
||
.1.3.6.1.4.1.253.8.51.4 |
||
.1.3.6.1.4.1.253.8.51.4.1 |
||
.1.3.6.1.4.1.253.8.51.4.1.1 |
||
.1.3.6.1.4.1.253.8.51.4.1.1.1 |
||
.1.3.6.1.4.1.253.8.51.4.1.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.4.1.1.3 |
|
|
OctetStringxcmGenClientDataIndex
|
.1.3.6.1.4.1.253.8.51.4.1.1.4 |
|
.1.3.6.1.4.1.253.8.51.4.1.1.5 |
||
.1.3.6.1.4.1.253.8.51.4.1.1.6 |
||
.1.3.6.1.4.1.253.8.51.4.1.1.7 |
||
.1.3.6.1.4.1.253.8.51.5 |
||
.1.3.6.1.4.1.253.8.51.5.1 |
||
.1.3.6.1.4.1.253.8.51.5.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.253.8.51.5.1.1.1 |
|
.1.3.6.1.4.1.253.8.51.5.1.1.2 |
||
.1.3.6.1.4.1.253.8.51.5.1.1.3 |
||
.1.3.6.1.4.1.253.8.51.5.1.1.4 |
||
.1.3.6.1.4.1.253.8.51.6 |
||
.1.3.6.1.4.1.253.8.51.6.1 |
||
.1.3.6.1.4.1.253.8.51.6.1.1 |
||
.1.3.6.1.4.1.253.8.51.6.1.1.1 |
||
.1.3.6.1.4.1.253.8.51.6.1.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.6.1.1.3 |
|
.1.3.6.1.4.1.253.8.51.7 |
||
.1.3.6.1.4.1.253.8.51.7.1 |
||
.1.3.6.1.4.1.253.8.51.7.1.1 |
||
.1.3.6.1.4.1.253.8.51.7.1.1.1 |
||
.1.3.6.1.4.1.253.8.51.7.1.1.2 |
||
.1.3.6.1.4.1.253.8.51.8 |
||
.1.3.6.1.4.1.253.8.51.8.1 |
||
|
secondsXEROX-GENERAL-TCCardinal32
|
.1.3.6.1.4.1.253.8.51.8.1.1 |
|
|
secondsXEROX-GENERAL-TCCardinal32
|
.1.3.6.1.4.1.253.8.51.8.1.2 |
|
.1.3.6.1.4.1.253.8.51.8.1.3 |
||
.1.3.6.1.4.1.253.8.51.8.1.4 |
||
.1.3.6.1.4.1.253.8.51.8.1.5 |
||
.1.3.6.1.4.1.253.8.51.8.2 |
||
.1.3.6.1.4.1.253.8.51.8.2.1 |
||
.1.3.6.1.4.1.253.8.51.8.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.8.2.1.2 |
||
|
OctetString
|
.1.3.6.1.4.1.253.8.51.8.2.1.3 |
|
|
ObjectIdentifierxcmGenMessageMapStringIndexOID
|
.1.3.6.1.4.1.253.8.51.8.2.1.4 |
|
|
secondsXEROX-GENERAL-TCCardinal32
|
.1.3.6.1.4.1.253.8.51.8.2.1.5 |
|
.1.3.6.1.4.1.253.8.51.9 |
||
.1.3.6.1.4.1.253.8.51.9.1 |
||
.1.3.6.1.4.1.253.8.51.9.1.1 |
||
.1.3.6.1.4.1.253.8.51.9.1.2 |
||
.1.3.6.1.4.1.253.8.51.9.1.3 |
||
.1.3.6.1.4.1.253.8.51.9.2 |
||
.1.3.6.1.4.1.253.8.51.9.2.1 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.1 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.2 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.3 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.4 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.5 |
||
.1.3.6.1.4.1.253.8.51.9.2.1.6 |
Dependencies (10) 7 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- HOST-RESOURCES-MIBrfc
- IANA-CHARSET-MIBrfc
- XEROX-COMMON-MIBxerox
- XEROX-GENERAL-TCxerox
- XEROX-GENERAL-MIBxeroxselected
Conformance Groups (16)
Compliance Statements (1)
OID
.1.3.6.1.4.1.253.8.51.2.3The compliance statements for SNMP management agents that
implement the General MIB.
implement the General MIB.
Required groups
| mandatory | xcmGenBaseGroup | |
| mandatory | xcmGenTrapClientGroup | |
| mandatory | xcmGenTrapViewGroup | |
| optional | xcmGenCurrentLocalizationGroup |
This group controls the localization of dynamic string objects of type 'InternationalDisplayString' in legacy MIBs. Implementation of this group is conditionally mandatory, ie, mandatory for all systems which support MIB objects with type 'InternationalDisplayString' and optional for all other systems. |
| optional | xcmGenLocalizationGroup |
This group declares supported localizations for string objects of type 'InternationalDisplayString' in legacy MIBs and of type 'XcmFixedLocaleDisplayString' or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs. Implementation of this group is conditionally mandatory, ie, mandatory for all systems which support MIB objects with type 'InternationalDisplayString', 'XcmFixedLocaleDisplayString', 'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String' and optional for all other systems. |
| optional | xcmGenCodeIndexedStringGroup |
Implementation of this group is conditionally mandatory: Mandatory for all systems which implement MIB objects of type 'CodeIndexedStringIndex' or implement the 'xcmGenCodedCharSetGroup'. |
| optional | xcmGenCodedCharSetGroup |
Implementation of this group is conditionally mandatory: Mandatory for all systems which implement MIB objects of type 'CodeIndexedStringIndex' or implement the 'xcmGenCodeIndexedStringGroup'. |
| optional | xcmGenFixedLocalizationGroup |
This group controls the localization of static string objects of type 'XcmFixedLocaleDisplayString' or 'Xcm[Fixed|Mamed]LocaleUtf8String' in XCMI MIBs. Implementation of this group is conditionally mandatory, ie, mandatory for all systems which support MIB objects with type 'XcmFixedLocaleDisplayString', 'XcmFixedLocaleUtf8String', or 'XcmNamedLocaleUtf8String' and optional for all other systems. |
| optional | xcmGenLockGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support advisory contention locks, and optional for all other systems. Implementation of this group is conditionally mandatory, however it SHALL be implemented by systems which implement the 'xcmGenReconfGroup' and 'xcmGenOptionGroup'. |
| optional | xcmGenReconfGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support tree structured atomic reconfiguration, and optional for all other systems. Implementation of this group is conditionally mandatory, however it SHALL be implemented by systems which implement the 'xcmGenOptionGroup'. Usage: Systems which implement the 'xcmGenReconfGroup' and 'xcmGenOptionGroup' SHALL also implement the 'xcmGenLockGroup' (for advisory contention locks). |
| optional | xcmGenOptionGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support tree structured atomic reconfiguration, and optional for all other systems. -- Implementation of this group is conditionally mandatory, however it SHALL be implemented by systems which implement the 'xcmGenReconfGroup'. -- Usage: Systems which implement the 'xcmGenReconfGroup' and 'xcmGenOptionGroup' SHALL also implement the 'xcmGenLockGroup' (for advisory contention locks). |
| optional | xcmGenClientDataGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which support 'client data' for remote management stations, and optional for all other systems. Usage: Conforming implementations SHALL preserve active 'client data' objects across management agent power cycles. |
| optional | xcmGenMessageMapGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement message label lookups of agent-supplied strings and optional for all other systems. |
| optional | xcmGenMessageTextGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement message translations of agent-supplied strings and optional for all other systems. |
| optional | xcmGenNotifyRuleGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement event notification via non-SNMP delivery methods and optional for all other systems. Note: Systems implementing the Notify Rule group SHALL implement the Notify Detail group. Note: The Notify Rule group is functionally equivalent to the Trap Client group for non-SNMP event delivery methods. |
| optional | xcmGenNotifyDetailGroup |
Implementation of this group is conditionally mandatory, ie, mandatory for systems which implement event notification via non-SNMP delivery methods and optional for all other systems. Note: Systems implementing the Notify Detail group SHALL implement the Notify Rule group. Note: The Notify Detail group is functionally equivalent to the Trap View group for non-SNMP event delivery methods. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| xcmGenBaseSNMPReadCommunity | readonly |
OctetString
|
It is conformant to implement this object as read-only. Usage: All XCMI conforming management agents are STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest to this object, changing the system 'read community name' (for best interworking with third-party management stations). |
| xcmGenBaseSNMPWriteCommunity | readonly |
OctetString
|
It is conformant to implement this object as read-only. Usage: All XCMI conforming management agents are STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest to this object, changing the system 'write community name' (for best interworking with third-party management stations). |
| xcmGenBaseSNMPTrapCommunity | readonly |
OctetString
|
It is conformant to implement this object as read-only. Usage: All XCMI conforming management agents are STRONGLY RECOMMENDED to support an authenticated SNMP SetRequest to this object, changing the system 'trap community name' (for best interworking with third-party management stations). |
| xcmGenBaseGroupWalkHidden | readonly | It is conformant to implement this object as read-only. XCMI conforming management agents NEED NOT support changing of MIB walk 'hidden' groups by remote management stations. |
|
| xcmGenCurrentLocalizationIndex | readonly | It is conformant to implement this object as read-only | |
| xcmGenCurrLocalizationRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenLocalizationRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenLocalizationASCIIName | readonly | It is conformant to implement this object as read-only | |
| xcmGenLocalizationName | readonly | It is conformant to implement this object as read-only | |
| xcmGenLocalizationLanguage | readonly | It is conformant to implement this object as read-only | |
| xcmGenLocalizationCountry | readonly | It is conformant to implement this object as read-only | |
| xcmGenLocalizationCharSet | readonly | It is conformant to implement this object as read-only | |
| xcmGenCodeIndexedStringRowStat | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenCodeIndexedStringData | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 32 octets maximum string length need be supported. |
| xcmGenCodedCharSetRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenCodedCharSetASCIIName | readonly | It is conformant to implement this object as read-only | |
| xcmGenFixedLocalizationIndex | readonly | It is conformant to implement this object as read-only | |
| xcmGenFixedLocalizationRowStat | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenLockRowStatus | readwrite |
active(1), notInService(2)
|
It is conformant to implement this object as read-write, and only two of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1) and notInService(2). |
| xcmGenLockOwnerString | readwrite |
OctetString
|
It is conformant to implement this object as read-write, and only 32 octets maximum string length need be supported. |
| xcmGenLockOwnerSubtree | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenLockOwnerTimer | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenReconfRowStatus | readwrite |
active(1), notInService(2)
|
It is conformant to implement this object as read-write, and only two of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1) and notInService(2). |
| xcmGenReconfOptionIndex | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenReconfOptionState | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionRowStatus | readwrite |
active(1), notInService(2)
|
It is conformant to implement this object as read-write, and only two of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1) and notInService(2). |
| xcmGenOptionTypeOID | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionValueSyntax | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionValueInteger | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionValueOID | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionValueString | readwrite |
OctetString
|
It is conformant to implement this object as read-write, and only 32 octets maximum string length need be supported. |
| xcmGenOptionValueLocalization | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionValueCodedCharSet | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionNextIndex | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionPreviousIndex | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenOptionFamilyIndex | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenClientDataRowStatus | readwrite |
active(1), notInService(2)
|
It is conformant to implement this object as read-write, and only two of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1) and notInService(2). |
| xcmGenClientDataRequestID | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenClientDataProductID | readwrite | It is conformant to implement this object as read-write. | |
| xcmGenClientDataLength | readwrite | It is conformant to implement this object as read-write, and only 1 octet maximum client data length need be supported. |
|
| xcmGenClientDataString | readwrite |
OctetString
|
It is conformant to implement this object as read-write, and only 1 octet maximum client data length need be supported. |
| xcmGenTrapClientRowStatus | readonly |
active(1)
|
Usage: It is conformant to implement this object as read-only, however, conforming management agents are STRONGLY RECOMMENDED to support at least read-write access to this object. |
| xcmGenTrapClientRowPersistence | readonly |
volatile(3)
|
Usage: It is conformant to implement this object as read-only, however, conforming management agents are STRONGLY RECOMMENDED to support at least read-write access to this object. Usage: Conforming management agents SHALL support 'volatile' (lost across power cycles). Usage: Conforming management agents are STRONGLY RECOMMENDED to support 'nonvolatile' (preserved across power cycles), but NEED NOT support any other levels of persistence. |
| xcmGenTrapClientSNMPVersion | readonly |
unknown(1), other(2), snmpV1Community(3)
|
It is conformant to implement this object as read-only, and only those specified enumerated values for the 'XcmGenSNMPVersion' textual convention need be supported, specifically: snmpV1Community(3). |
| xcmGenTrapClientSNMPCommunity | readonly |
OctetString
|
It is conformant to implement this object as read-only, and only 1 octet maximum string length need be supported. XCMI conforming management agents NEED NOT support changing of SNMP community strings by remote management stations. |
| xcmGenTrapViewRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only those specified enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenTrapViewNotifySeverity | readonly | It is conformant to implement this object as read-only. | |
| xcmGenTrapViewNotifyTraining | readonly | It is conformant to implement this object as read-only. | |
| xcmGenMessageMapStringLabel | It is conformant to implement this object as read-only, and only 64 octets maximum string length need be supported. |
||
| xcmGenMessageTextTargetString |
OctetString
|
It is conformant to implement this object as read-only, and only 64 octets maximum string length need be supported. |
|
| xcmGenNotifyRuleRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenNotifyRuleRowPersistence | readonly |
volatile(3)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'xcmGenRowPersistence' textual convention need be supported, specifically: volatile(3). |
| xcmGenNotifyRuleRecipientURI | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleEventNames | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleEventDelay | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleSeverityFilter | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleTrainingFilter | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleCharset | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyRuleNaturalLanguage | readonly | It is conformant to implement this object as read-only. | |
| xcmGenNotifyDetailRowStatus | readonly |
active(1)
|
It is conformant to implement this object as read-only, and only one of the enumerated values for the 'RowStatus' textual convention need be supported, specifically: active(1). |
| xcmGenNotifyDetailString | readonly | It is conformant to implement this object as read-only. |