WebGraph-Thermometer-PT-US-MIB Table View

List of sensors.

wtWebioAn1GraphPtSensorEntry row .1.3.6.1.4.1.5040.1.2.39.1.2.1

Temperature sensor numbers.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSensorNomandatory Temperature sensor number.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.5040.1.2.39.1.2.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtTempValueEntry row .1.3.6.1.4.1.5040.1.2.39.1.3.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtTempValuemandatory Temperature value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.39.1.3.1.1

List of binary temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.39.1.4.1

Binary temperature values of the sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtBinaryTempValuemandatory Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.39.1.4.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.39.1.8.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtTempValuePktmandatory Temperature value of the sensor, ASCII, 5 characters in length, decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.39.1.8.1.1

List of sensor colors for the praphical presentation.

wtWebioAn1GraphPtSensorColorEntry row .1.3.6.1.4.1.5040.1.2.39.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.39.3.1.4.4.1.1

List of alarm indices.

wtWebioAn1GraphPtAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.39.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebioAn1GraphPtAlarmNo

Column	Syntax	OID
wtWebioAn1GraphPtAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.39.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebioAn1GraphPtAlarmEntry row .1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebioAn1GraphPtAlarmNo

Column	Syntax	OID
wtWebioAn1GraphPtAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0 : Timer Bit 1 : ColdStart Bit 2 : WarmStart Bit 3 : Sensor lost Bit 4-7: unused Octet 4: Bit 0 : Sensor 1 Bit 1…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.1
wtWebioAn1GraphPtAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.2
wtWebioAn1GraphPtAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.3
wtWebioAn1GraphPtAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.4
wtWebioAn1GraphPtAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.5
wtWebioAn1GraphPtAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.6
wtWebioAn1GraphPtAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Mail Enable Bit 1 : SNMP Trap enable Bit 2 : TCP Client enable Bit 3 : Syslog Messages enable Bit 4 : FTP enable Bi…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.7
wtWebioAn1GraphPtAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.8
wtWebioAn1GraphPtAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.9
wtWebioAn1GraphPtAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.10
wtWebioAn1GraphPtAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.11
wtWebioAn1GraphPtAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.12
wtWebioAn1GraphPtAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.13
wtWebioAn1GraphPtAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.14
wtWebioAn1GraphPtAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.15
wtWebioAn1GraphPtAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.16
wtWebioAn1GraphPtAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.17
wtWebioAn1GraphPtAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.18
wtWebioAn1GraphPtAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.19
wtWebioAn1GraphPtAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.20
wtWebioAn1GraphPtAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.21
wtWebioAn1GraphPtAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.22
wtWebioAn1GraphPtAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.23
wtWebioAn1GraphPtAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.24
wtWebioAn1GraphPtAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.25
wtWebioAn1GraphPtAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.26
wtWebioAn1GraphPtAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.27
wtWebioAn1GraphPtAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.28
wtWebioAn1GraphPtAlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.29
wtWebioAn1GraphPtAlarmTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.30
wtWebioAn1GraphPtAlarmDeltaTempmandatory Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.31
wtWebioAn1GraphPtAlarmNamemandatory Alert name	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.39
wtWebioAn1GraphPtAlarmActivemandatory Alert active 1 = ON 0 = OFF	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.40
wtWebioAn1GraphPtAlarmHttpReqAuthEnablemandatory Binary coded options, select only one option at the same time: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.61
wtWebioAn1GraphPtAlarmHttpReqAuthUsermandatory HTTP Request: User	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.62
wtWebioAn1GraphPtAlarmHttpReqAuthPasswordmandatory HTTP Request: Password	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.63
wtWebioAn1GraphPtAlarmHttpReqSetUrlmandatory HTTP Request: Set URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.64
wtWebioAn1GraphPtAlarmHttpReqClearUrlmandatory HTTP Request: Clear URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.65
wtWebioAn1GraphPtAlarmHttpReqServerPortmandatory HTTP Request: Server Port	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.66
wtWebioAn1GraphPtAlarmMqttTopicPathmandatory MQTT Publish: Topic path	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.67
wtWebioAn1GraphPtAlarmMqttTopicSetTopicmandatory MQTT Publish: Topic SET message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.68
wtWebioAn1GraphPtAlarmMqttTopicClearmandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.69
wtWebioAn1GraphPtAlarmSensorLostSelectionmandatory Binary coded options: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Sensor 0	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.70
wtWebioAn1GraphPtAlarmLimitWindowmandatory If window type is INSIDE the alarm is genereted when the temperature is greater minumum value and lower than maximum value. If window type is OUTSIDE the alarm is generated when the measured value is lower than the mini…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.5.3.1.71

List of sensor colors for the praphical presentation.

wtWebioAn1GraphPt2SensorColorEntry row .1.3.6.1.4.1.5040.1.2.39.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPt2GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.39.3.1.6.2.3.1.1
wtWebioAn1GraphPt2GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebioAn1GraphPtPortEntry row .1.3.6.1.4.1.5040.1.2.39.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebioAn1GraphPtSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.1
wtWebioAn1GraphPtPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.2
wtWebioAn1GraphPtPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.3
wtWebioAn1GraphPtPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.4
wtWebioAn1GraphPtPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.5
wtWebioAn1GraphPtPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.6
wtWebioAn1GraphPtPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.7
wtWebioAn1GraphPtPortSensorSelectmandatory Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : PT100 (default) Bit 1 : PT1000 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.39.3.2.1.1.8

List of sensors.

wtWebioAn1GraphPtSwSensorEntry row .1.3.6.1.4.1.5040.1.2.40.1.2.1

Temperature sensor numbers.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwSensorNomandatory Temperature sensor number.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.5040.1.2.40.1.2.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtSwTempValueEntry row .1.3.6.1.4.1.5040.1.2.40.1.3.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwTempValuemandatory Temperature value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.40.1.3.1.1

List of binary temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtSwBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.40.1.4.1

Binary temperature values of the sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwBinaryTempValuemandatory Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.40.1.4.1.1

List of outputs.

wtWebioAn1GraphPtSwOutputEntry row .1.3.6.1.4.1.5040.1.2.40.1.6.1

Output numbers.

Indexes

wtWebioAn1GraphPtSwOutputNo

Column	Syntax	OID
wtWebioAn1GraphPtSwOutputNomandatory Output number.	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.5040.1.2.40.1.6.1.1

List of binary ouput values corresponding to the channel numbers.

wtWebioAn1GraphPtSwBinaryOutputValueEntry row .1.3.6.1.4.1.5040.1.2.40.1.7.1

Binary states of the outputs.

Indexes

wtWebioAn1GraphPtSwOutputNo

Column	Syntax	OID
wtWebioAn1GraphPtSwBinaryOutputValuemandatory Binary state of the output.	Enumeration Enumerated Values: 0 wtWebioAn1GraphPtSwBinaryOutput-OFF 1 wtWebioAn1GraphPtSwBinaryOutput-ON	.1.3.6.1.4.1.5040.1.2.40.1.7.1.1

List of temperature values corresponding to the channel numbers.

wtWebioAn1GraphPtSwTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.40.1.8.1

Temperatures of the sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwTempValuePktmandatory Temperature value of the sensor, ASCII, 5 characters in length, decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.40.1.8.1.1

List of sensor colors for the praphical presentation.

wtWebioAn1GraphPtSwSensorColorEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.40.3.1.4.4.1.1

List of alarm indices.

wtWebioAn1GraphPtSwAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebioAn1GraphPtSwAlarmNo

Column	Syntax	OID
wtWebioAn1GraphPtSwAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.40.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebioAn1GraphPtSwAlarmEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebioAn1GraphPtSwAlarmNo

Column	Syntax	OID
wtWebioAn1GraphPtSwAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0 : Timer Bit 1 : ColdStart Bit 2 : WarmStart Bit 3 : Sensor lost Bit 4-7: unused Octet 4: Bit 0 : Sensor 1 Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.1
wtWebioAn1GraphPtSwAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.2
wtWebioAn1GraphPtSwAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.3
wtWebioAn1GraphPtSwAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.4
wtWebioAn1GraphPtSwAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.5
wtWebioAn1GraphPtSwAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.6
wtWebioAn1GraphPtSwAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Output switch enable Bit 1 : Mail Enable Bit 2 : SNMP Trap enable Bit 3 : TCP Client enable Bit 4 : Syslog Messages …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.7
wtWebioAn1GraphPtSwAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.8
wtWebioAn1GraphPtSwAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.9
wtWebioAn1GraphPtSwAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.10
wtWebioAn1GraphPtSwAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.11
wtWebioAn1GraphPtSwAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.12
wtWebioAn1GraphPtSwAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.13
wtWebioAn1GraphPtSwAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.14
wtWebioAn1GraphPtSwAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.15
wtWebioAn1GraphPtSwAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.16
wtWebioAn1GraphPtSwAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.17
wtWebioAn1GraphPtSwAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.18
wtWebioAn1GraphPtSwAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.19
wtWebioAn1GraphPtSwAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.20
wtWebioAn1GraphPtSwAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.21
wtWebioAn1GraphPtSwAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.22
wtWebioAn1GraphPtSwAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.23
wtWebioAn1GraphPtSwAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.24
wtWebioAn1GraphPtSwAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.25
wtWebioAn1GraphPtSwAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.26
wtWebioAn1GraphPtSwAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.27
wtWebioAn1GraphPtSwAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.28
wtWebioAn1GraphPtSwAlarmFtpOptionsmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.29
wtWebioAn1GraphPtSwAlarmTimerCronmandatory This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separately. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.30
wtWebioAn1GraphPtSwAlarmDeltaTempmandatory Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.31
wtWebioAn1GraphPtSwAlarmNamemandatory Alert name	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.39
wtWebioAn1GraphPtSwAlarmActivemandatory Alert active 1 = ON 0 = OFF	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.40
wtWebioAn1GraphPtSwAlarmHttpReqAuthEnablemandatory Binary coded options, select only one option at the same time: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.61
wtWebioAn1GraphPtSwAlarmHttpReqAuthUsermandatory HTTP Request: User	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.62
wtWebioAn1GraphPtSwAlarmHttpReqAuthPasswordmandatory HTTP Request: Password	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.63
wtWebioAn1GraphPtSwAlarmHttpReqSetUrlmandatory HTTP Request: Set URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.64
wtWebioAn1GraphPtSwAlarmHttpReqClearUrlmandatory HTTP Request: Clear URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.65
wtWebioAn1GraphPtSwAlarmHttpReqServerPortmandatory HTTP Request: Server Port	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.66
wtWebioAn1GraphPtSwAlarmMqttTopicPathmandatory MQTT Publish: Topic path	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.67
wtWebioAn1GraphPtSwAlarmMqttTopicSetTopicmandatory MQTT Publish: Topic SET message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.68
wtWebioAn1GraphPtSwAlarmMqttTopicClearmandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.69
wtWebioAn1GraphPtSwAlarmSensorLostSelectionmandatory Binary coded options: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : Sensor 0	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.70
wtWebioAn1GraphPtSwAlarmLimitWindowmandatory If window type is INSIDE the alarm is genereted when the temperature is greater minumum value and lower than maximum value. If window type is OUTSIDE the alarm is generated when the measured value is lower than the mini…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.5.3.1.71

List of sensor colors for the praphical presentation.

wtWebioAn1GraphPtSw2SensorColorEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSw2GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.40.3.1.6.2.3.1.1
wtWebioAn1GraphPtSw2GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.6.2.3.1.2

List of Report indices.

wtWebioAn1GraphPtSwReportIfEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.7.2.1

Numbers of the Reports.

Indexes

wtWebioAn1GraphPtSwReportNo

Column	Syntax	OID
wtWebioAn1GraphPtSwReportNomandatory Report number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.40.3.1.7.2.1.1

List of settings depending on the Report number.

wtWebioAn1GraphPtSwReportEntry row .1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1

Report parameters of the individual Reports.

Indexes

wtWebioAn1GraphPtSwReportNo

Column	Syntax	OID
wtWebioAn1GraphPtSwReportEnablemandatory Bin?r kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.1
wtWebioAn1GraphPtSwReportTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.2
wtWebioAn1GraphPtSwReportMethodeEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.3
wtWebioAn1GraphPtSwReportEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.8
wtWebioAn1GraphPtSwReportMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.9
wtWebioAn1GraphPtSwReportMailTextmandatory Report mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.10
wtWebioAn1GraphPtSwReportManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.11
wtWebioAn1GraphPtSwReportTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.12
wtWebioAn1GraphPtSwReportMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.13
wtWebioAn1GraphPtSwReportTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.14
wtWebioAn1GraphPtSwReportTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.15
wtWebioAn1GraphPtSwReportTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.16
wtWebioAn1GraphPtSwReportClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.17
wtWebioAn1GraphPtSwReportClearMailTextmandatory Report clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.18
wtWebioAn1GraphPtSwReportClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.19
wtWebioAn1GraphPtSwReportClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.20
wtWebioAn1GraphPtSwReportSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.24
wtWebioAn1GraphPtSwReportSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.25
wtWebioAn1GraphPtSwReportSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.26
wtWebioAn1GraphPtSwReportSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.27
wtWebioAn1GraphPtSwReportFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.28
wtWebioAn1GraphPtSwReportFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.29
wtWebioAn1GraphPtSwReportFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.30
wtWebioAn1GraphPtSwReportFtpClearTextmandatory Report clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.31
wtWebioAn1GraphPtSwReportFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.1.7.3.1.32

List of settings depending on the sensor number.

wtWebioAn1GraphPtSwPortEntry row .1.3.6.1.4.1.5040.1.2.40.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebioAn1GraphPtSwSensorNo

Column	Syntax	OID
wtWebioAn1GraphPtSwPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.1
wtWebioAn1GraphPtSwPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.2
wtWebioAn1GraphPtSwPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.3
wtWebioAn1GraphPtSwPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.4
wtWebioAn1GraphPtSwPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.5
wtWebioAn1GraphPtSwPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.6
wtWebioAn1GraphPtSwPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.7
wtWebioAn1GraphPtSwPortSensorSelectmandatory Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : PT100 (default) Bit 1 : PT1000 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.8
wtWebioAn1GraphPtSwPortSensorUnitmandatory Binary coded options of the sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Celsius (default) Bit 1 : Fahrenheit Bit 2 : Kelvin Bit 3-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.2.1.1.9

List of settings depending on the sensor number.

wtWebioAn1GraphPtSwPortOutputEntry row .1.3.6.1.4.1.5040.1.2.40.3.2.3.1

Parameters for the individual outputs.

Indexes

wtWebioAn1GraphPtSwOutputNo

Column	Syntax	OID
wtWebioAn1GraphPtSwPortOutputNamemandatory Name of the output.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.3.1.1
wtWebioAn1GraphPtSwPortOutputTextmandatory Description of the output.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.3.1.2
wtWebioAn1GraphPtSwPortOutputPolaritymandatory Binary coded options of the output: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Normally open (default) Bit 1 : Normally closed Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.2.3.1.3
wtWebioAn1GraphPtSwPortOutputCommentmandatory Additional informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.40.3.2.3.1.4
wtWebioAn1GraphPortOutputResetEnablemandatory Binary coded options of the output: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Manual Reset enable (default off) Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.40.3.2.3.1.5