WebGraph-Thermo-Hygrometer-US-MIB Table View

List of sensors.

wtWebGraphThermoHygroSensorEntry row .1.3.6.1.4.1.5040.1.2.42.1.2.1

List of sensor numbers.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroSensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.42.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphThermoHygroTempValueEntry row .1.3.6.1.4.1.5040.1.2.42.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroTempValuemandatory Measurement value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.42.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphThermoHygroBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.42.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroBinaryTempValuemandatory Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.42.1.4.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphThermoHygroTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.42.1.8.1

Measurement values of the sensors.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroTempValuePktmandatory Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.42.1.8.1.1

List of alarm indices.

wtWebGraphThermoHygroAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.42.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphThermoHygroAlarmNo

Column	Syntax	OID
wtWebGraphThermoHygroAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.42.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphThermoHygroAlarmEntry row .1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphThermoHygroAlarmNo

Column	Syntax	OID
wtWebGraphThermoHygroAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.1
wtWebGraphThermoHygroAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.2
wtWebGraphThermoHygroAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.3
wtWebGraphThermoHygroAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.4
wtWebGraphThermoHygroAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.5
wtWebGraphThermoHygroAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.6
wtWebGraphThermoHygroAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.7
wtWebGraphThermoHygroAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.8
wtWebGraphThermoHygroAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.9
wtWebGraphThermoHygroAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.10
wtWebGraphThermoHygroAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.11
wtWebGraphThermoHygroAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.12
wtWebGraphThermoHygroAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.13
wtWebGraphThermoHygroAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.14
wtWebGraphThermoHygroAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.15
wtWebGraphThermoHygroAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.16
wtWebGraphThermoHygroAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.17
wtWebGraphThermoHygroAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.18
wtWebGraphThermoHygroAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.19
wtWebGraphThermoHygroAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.20
wtWebGraphThermoHygroAlarmDeltaTempmandatory Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.21
wtWebGraphThermoHygroAlarmRHMinmandatory Minimum rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.22
wtWebGraphThermoHygroAlarmRHMaxmandatory Maximum rel.Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.23
wtWebGraphThermoHygroAlarmRHHysteresismandatory Hysterese rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.24
wtWebGraphThermoHygroAlarmAHMinmandatory Minimum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.25
wtWebGraphThermoHygroAlarmAHMaxmandatory Maximum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.26
wtWebGraphThermoHygroAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.27
wtWebGraphThermoHygroAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.28
wtWebGraphThermoHygroAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.29
wtWebGraphThermoHygroAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.30
wtWebGraphThermoHygroAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.31
wtWebGraphThermoHygroAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.32
wtWebGraphThermoHygroAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.33
wtWebGraphThermoHygroAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.34
wtWebGraphThermoHygroAlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.35
wtWebGraphThermoHygroAlarmTimerCronmandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.36
wtWebGraphThermoHygroAlarmNamemandatory Alert name	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.39
wtWebGraphThermoHygroAlarmActivemandatory Alert active 1 = ON 0 = OFF	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.40
wtWebGraphThermoHygroAlarmHttpReqAuthEnablemandatory Binary coded options, select only one option at the same time: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.61
wtWebGraphThermoHygroAlarmHttpReqAuthUsermandatory HTTP Request: User	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.62
wtWebGraphThermoHygroAlarmHttpReqAuthPasswordmandatory HTTP Request: Password	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.63
wtWebGraphThermoHygroAlarmHttpReqSetUrlmandatory HTTP Request: Set URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.64
wtWebGraphThermoHygroAlarmHttpReqClearUrlmandatory HTTP Request: Clear URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.65
wtWebGraphThermoHygroAlarmHttpReqServerPortmandatory HTTP Request: Server Port	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.66
wtWebGraphThermoHygroAlarmMqttTopicPathmandatory MQTT Publish: Topic path	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.67
wtWebGraphThermoHygroAlarmMqttTopicSetTopicmandatory MQTT Publish: Topic SET message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.68
wtWebGraphThermoHygroAlarmMqttTopicClearmandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.69
wtWebGraphThermoHygroAlarmSensorLostSelectionmandatory Binary coded options: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 2-7: unused Bit 1 : Sensor 1 Bit 0 : Sensor 0	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.70
wtWebGraphThermoHygroAlarmLimitWindowmandatory If window type is INSIDE the alarm is genereted when the temperature is greater minumum value and lower than maximum value. If window type is OUTSIDE the alarm is generated when the measured value is lower than the mini…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.71
wtWebGraphThermoHygroAlarmSnmpManagerPortmandatory Port number of the SNMP Manager to which the Webio device should send SNMP traps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.76
wtWebGraphThermoHygroAlarmMqttQoSmandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: QoS 0 Bit 1: QoS 1 Bit 2: QoS 2 Bit 3-7:unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.77
wtWebGraphThermoHygroAlarmMqttRetainmandatory Binary coded value: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : retain enable Bit 1-7 : unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.42.3.1.5.3.1.78

List of sensor colors for the praphical presentation.

wtWebGraphThermoHygroSensorColorEntry row .1.3.6.1.4.1.5040.1.2.42.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroGraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.42.3.1.6.2.3.1.1
wtWebGraphThermoHygroGraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebGraphThermoHygroPortEntry row .1.3.6.1.4.1.5040.1.2.42.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphThermoHygroSensorNo

Column	Syntax	OID
wtWebGraphThermoHygroPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.1
wtWebGraphThermoHygroPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.2
wtWebGraphThermoHygroPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.3
wtWebGraphThermoHygroPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.4
wtWebGraphThermoHygroPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.5
wtWebGraphThermoHygroPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.6
wtWebGraphThermoHygroPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.42.3.2.1.1.7