WebGraph-Thermo-Hygro-Barometer-US-MIB Table View

List of sensors.

wtWebGraphThermoBaroSensorEntry row .1.3.6.1.4.1.5040.1.2.37.1.2.1

List of sensor numbers.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroSensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.37.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphThermoBaroTempValueEntry row .1.3.6.1.4.1.5040.1.2.37.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroTempValuemandatory Measurement value of the sensor, ASCII, 5 characters in length.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.37.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphThermoBaroBinaryTempValueEntry row .1.3.6.1.4.1.5040.1.2.37.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroBinaryTempValuemandatory Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.37.1.4.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphThermoBaroTempValuePktEntry row .1.3.6.1.4.1.5040.1.2.37.1.8.1

Measurement values of the sensors.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroTempValuePktmandatory Measurement value of the sensor, ASCII, 5 characters in length, delimeter is decimal point.	OctetString Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.37.1.8.1.1

List of alarm indices.

wtWebGraphThermoBaroAlarmIfEntry row .1.3.6.1.4.1.5040.1.2.37.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphThermoBaroAlarmNo

Column	Syntax	OID
wtWebGraphThermoBaroAlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.37.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphThermoBaroAlarmEntry row .1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphThermoBaroAlarmNo

Column	Syntax	OID
wtWebGraphThermoBaroAlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.1
wtWebGraphThermoBaroAlarmMinmandatory Minimum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.2
wtWebGraphThermoBaroAlarmMaxmandatory Maximum temperature in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.3
wtWebGraphThermoBaroAlarmHysteresismandatory Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.4
wtWebGraphThermoBaroAlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.5
wtWebGraphThermoBaroAlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.6
wtWebGraphThermoBaroAlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP enable Bit 5: HTTP…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.7
wtWebGraphThermoBaroAlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.8
wtWebGraphThermoBaroAlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.9
wtWebGraphThermoBaroAlarmMailTextmandatory Alarm mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.10
wtWebGraphThermoBaroAlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.11
wtWebGraphThermoBaroAlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.12
wtWebGraphThermoBaroAlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.13
wtWebGraphThermoBaroAlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.14
wtWebGraphThermoBaroAlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.15
wtWebGraphThermoBaroAlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.16
wtWebGraphThermoBaroAlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.17
wtWebGraphThermoBaroAlarmClearMailTextmandatory Alarm clear mail text: <Tn> provides the current temperature; n = 1..8. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.18
wtWebGraphThermoBaroAlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.19
wtWebGraphThermoBaroAlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.20
wtWebGraphThermoBaroAlarmDeltaTempmandatory Maximum rate of change degrees/min with maximum 2 decimal places. Compared with the average of a period of 5 minutes.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.21
wtWebGraphThermoBaroAlarmRHMinmandatory Minimum rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.22
wtWebGraphThermoBaroAlarmRHMaxmandatory Maximum rel.Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.23
wtWebGraphThermoBaroAlarmRHHysteresismandatory Hysterese rel. Humidity in percent with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.24
wtWebGraphThermoBaroAlarmAHMinmandatory Minimum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.25
wtWebGraphThermoBaroAlarmAHMaxmandatory Maximum abs. Humidity in g/(m*m*m) with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.26
wtWebGraphThermoBaroAlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.27
wtWebGraphThermoBaroAlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.28
wtWebGraphThermoBaroAlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.29
wtWebGraphThermoBaroAlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.30
wtWebGraphThermoBaroAlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.31
wtWebGraphThermoBaroAlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.32
wtWebGraphThermoBaroAlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.33
wtWebGraphThermoBaroAlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.34
wtWebGraphThermoBaroAlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.35
wtWebGraphThermoBaroAlarmTimerCronmandatory This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Rang…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.36
wtWebGraphThermoBaroAlarmNamemandatory Alert name	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.39
wtWebGraphThermoBaroAlarmActivemandatory Alert active 1 = ON 0 = OFF	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.40
wtWebGraphThermoBaroAlarmHttpReqAuthEnablemandatory Binary coded options, select only one option at the same time: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 1-7: unused Bit 0 : HHTP Request Authentication enable	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.61
wtWebGraphThermoBaroAlarmHttpReqAuthUsermandatory HTTP Request: User	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.62
wtWebGraphThermoBaroAlarmHttpReqAuthPasswordmandatory HTTP Request: Password	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.63
wtWebGraphThermoBaroAlarmHttpReqSetUrlmandatory HTTP Request: Set URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.64
wtWebGraphThermoBaroAlarmHttpReqClearUrlmandatory HTTP Request: Clear URL	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.65
wtWebGraphThermoBaroAlarmHttpReqServerPortmandatory HTTP Request: Server Port	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.66
wtWebGraphThermoBaroAlarmMqttTopicPathmandatory MQTT Publish: Topic path	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.67
wtWebGraphThermoBaroAlarmMqttTopicSetTopicmandatory MQTT Publish: Topic SET message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.68
wtWebGraphThermoBaroAlarmMqttTopicClearmandatory MQTT Publish: Topic CLEAR message	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.69
wtWebGraphThermoBaroAlarmSensorLostSelectionmandatory Binary coded options: OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 3-7: unused Bit 2 : Sensor 2 Bit 1 : Sensor 1 Bit 0 : Sensor 0	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.70
wtWebGraphThermoBaroAlarmLimitWindowmandatory If window type is INSIDE the alarm is genereted when the temperature is greater minumum value and lower than maximum value. If window type is OUTSIDE the alarm is generated when the measured value is lower than the mini…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.5.3.1.71

List of sensor colors for the praphical presentation.

wtWebGraphThermoBaroSensorColorEntry row .1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroGraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1.1
wtWebGraphThermoBaroGraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.1.6.2.3.1.2

List of settings depending on the sensor number.

wtWebGraphThermoBaroPortEntry row .1.3.6.1.4.1.5040.1.2.37.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphThermoBaroSensorNo

Column	Syntax	OID
wtWebGraphThermoBaroPortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.1
wtWebGraphThermoBaroPortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.2
wtWebGraphThermoBaroPortOffset1mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.3
wtWebGraphThermoBaroPortTemperature1mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.4
wtWebGraphThermoBaroPortOffset2mandatory Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.5
wtWebGraphThermoBaroPortTemperature2mandatory Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.6
wtWebGraphThermoBaroPortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.37.3.2.1.1.7