WebGraph-AnalogIO-57661-US-MIB Table View

List of sensors.

wtWebGraphAnalog57661SensorEntry row .1.3.6.1.4.1.5040.1.2.28.1.2.1

List of sensor numbers.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661SensorNomandatory Sensor number.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.28.1.2.1.1

List of measurement values corresponding to the channel numbers.

wtWebGraphAnalog57661ValuesEntry row .1.3.6.1.4.1.5040.1.2.28.1.3.1

Measurement values of the sensors.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661Valuesmandatory Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations.	OctetStringr/w Constraints: range: 5-5	.1.3.6.1.4.1.5040.1.2.28.1.3.1.1

List of binary measurement values corresponding to the channel numbers.

wtWebGraphAnalog57661BinaryValuesEntry row .1.3.6.1.4.1.5040.1.2.28.1.4.1

Binary measurement values of the sensors.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661BinaryValuesmandatory Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports settings for the read and write operations.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.28.1.4.1.1

Table of indices.

wtWebGraphAnalog57661BinaryIfEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1

Indices of the binary channels.

Indexes

wtWebGraphAnalog57661BinaryModeNo

Column	Syntax	OID
wtWebGraphAnalog57661BinaryModeNomandatory Number of the binary channel.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.2.1.1

Table of properties of the binary mode.

wtWebGraphAnalog57661BinaryEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1

Binary properties.

Indexes

wtWebGraphAnalog57661BinaryModeNo

Column	Syntax	OID
wtWebGraphAnalog57661BinaryOperationModemandatory Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.1
wtWebGraphAnalog57661BinaryTcpServerLocalPortmandatory Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.2
wtWebGraphAnalog57661BinaryTcpServerInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.3
wtWebGraphAnalog57661BinaryTcpServerApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box S…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.4
wtWebGraphAnalog57661BinaryTcpClientLocalPortmandatory Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.5
wtWebGraphAnalog57661BinaryTcpClientServerPortmandatory Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.6
wtWebGraphAnalog57661BinaryTcpClientServerIpAddrmandatory Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.7
wtWebGraphAnalog57661BinaryTcpClientServerPasswordmandatory Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.8
wtWebGraphAnalog57661BinaryTcpClientInactivitymandatory Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.9
wtWebGraphAnalog57661BinaryTcpClientInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.10
wtWebGraphAnalog57661BinaryTcpClientIntervalmandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.11
wtWebGraphAnalog57661BinaryTcpClientApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compat…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.12
wtWebGraphAnalog57661BinaryUdpPeerLocalPortmandatory Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.13
wtWebGraphAnalog57661BinaryUdpPeerRemotePortmandatory Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.14
wtWebGraphAnalog57661BinaryUdpPeerRemoteIpAddrmandatory Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.15
wtWebGraphAnalog57661BinaryUdpPeerInputTriggermandatory Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input …	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.16
wtWebGraphAnalog57661BinaryUdpPeerIntervalmandatory Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.17
wtWebGraphAnalog57661BinaryUdpPeerApplicationModemandatory Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.18
wtWebGraphAnalog57661BinaryConnectedPortmandatory Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.19
wtWebGraphAnalog57661BinaryConnectedIpAddrmandatory IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.	RFC1155-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.20
wtWebGraphAnalog57661BinaryTcpServerClientHttpPortmandatory HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.21
wtWebGraphAnalog57661BinaryTcpClientServerHttpPortmandatory HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.22
wtWebGraphAnalog57661BinaryTcpServerHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.23
wtWebGraphAnalog57661BinaryTcpServerHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.24
wtWebGraphAnalog57661BinaryTcpClientHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.25
wtWebGraphAnalog57661BinaryTcpClientHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be t…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.26
wtWebGraphAnalog57661BinaryUdpPeerHysteresis1mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be tra…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.27
wtWebGraphAnalog57661BinaryUdpPeerHysteresis2mandatory A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57661BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be tra…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.3.9.3.1.28

List of sensor colors for the praphical presentation.

wtWebGraphAnalog57661SensorColorEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.4.4.1

Index numbers of the sensors.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661SensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.28.3.1.4.4.1.1

List of alarm indices.

wtWebGraphAnalog57661AlarmIfEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1

Numbers of the alarms.

Indexes

wtWebGraphAnalog57661AlarmNo

Column	Syntax	OID
wtWebGraphAnalog57661AlarmNomandatory Alarm number.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.5040.1.2.28.3.1.5.2.1.1

List of settings depending on the alarm number.

wtWebGraphAnalog57661AlarmEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1

Alarm parameters of the individual alarms.

Indexes

wtWebGraphAnalog57661AlarmNo

Column	Syntax	OID
wtWebGraphAnalog57661AlarmTriggermandatory Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.1
wtWebGraphAnalog57661AlarmMin1mandatory Minimum sensor 1 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.2
wtWebGraphAnalog57661AlarmMax1mandatory Maximum sensor 1 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.3
wtWebGraphAnalog57661AlarmHysteresis1mandatory Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.4
wtWebGraphAnalog57661AlarmDelaymandatory Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.5
wtWebGraphAnalog57661AlarmIntervalmandatory Send interval for alarm messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.6
wtWebGraphAnalog57661AlarmEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.7
wtWebGraphAnalog57661AlarmEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.8
wtWebGraphAnalog57661AlarmMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.9
wtWebGraphAnalog57661AlarmMailTextmandatory Alarm mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.10
wtWebGraphAnalog57661AlarmManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.11
wtWebGraphAnalog57661AlarmTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.12
wtWebGraphAnalog57661AlarmMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.13
wtWebGraphAnalog57661AlarmTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.14
wtWebGraphAnalog57661AlarmTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.15
wtWebGraphAnalog57661AlarmTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.16
wtWebGraphAnalog57661AlarmClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.17
wtWebGraphAnalog57661AlarmClearMailTextmandatory Alarm clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.18
wtWebGraphAnalog57661AlarmClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.19
wtWebGraphAnalog57661AlarmClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.20
wtWebGraphAnalog57661AlarmMin2mandatory Minimum sensor 2 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.21
wtWebGraphAnalog57661AlarmMax2mandatory Maximum sensor 2 with maximum 2 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.22
wtWebGraphAnalog57661AlarmHysteresis2mandatory Hysterese rel. sensor 2 with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.23
wtWebGraphAnalog57661AlarmSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.24
wtWebGraphAnalog57661AlarmSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.25
wtWebGraphAnalog57661AlarmSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.26
wtWebGraphAnalog57661AlarmSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.27
wtWebGraphAnalog57661AlarmFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.28
wtWebGraphAnalog57661AlarmFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.29
wtWebGraphAnalog57661AlarmFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.30
wtWebGraphAnalog57661AlarmFtpClearTextmandatory Alarm clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.31
wtWebGraphAnalog57661AlarmFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.32
wtWebGraphAnalog57661AlarmTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.5.3.1.33

List of sensor colors for the praphical presentation.

wtWebGraphAnalog57661SensorColor2Entry row .1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1

Numbers of the sensors.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661GraphicsSensorColormandatory Color of the sensors at the praphical presention.	OctetStringr/w Constraints: range: 3-3	.1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.1
wtWebGraphAnalog57661GraphicsSelectScalemandatory Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.6.2.3.1.2

List of Report indices.

wtWebGraphAnalog57661ReportIfEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.7.2.1

Numbers of the Reports.

Indexes

wtWebGraphAnalog57661ReportNo

Column	Syntax	OID
wtWebGraphAnalog57661ReportNomandatory Report number.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5040.1.2.28.3.1.7.2.1.1

List of settings depending on the Report number.

wtWebGraphAnalog57661ReportEntry row .1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1

Report parameters of the individual Reports.

Indexes

wtWebGraphAnalog57661ReportNo

Column	Syntax	OID
wtWebGraphAnalog57661ReportEnablemandatory Bin?r kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.1
wtWebGraphAnalog57661ReportTimerCronmandatory This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a…	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.2
wtWebGraphAnalog57661ReportMethodeEnablemandatory Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.3
wtWebGraphAnalog57661ReportEMailAddrmandatory E-Mail address for sending the alarm mail to.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.8
wtWebGraphAnalog57661ReportMailSubjectmandatory Subject line for alarm mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.9
wtWebGraphAnalog57661ReportMailTextmandatory Report mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.10
wtWebGraphAnalog57661ReportManagerIPmandatory Name or IP address of the SNMP Manager which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.11
wtWebGraphAnalog57661ReportTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.12
wtWebGraphAnalog57661ReportMailOptionsmandatory Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Logger.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.13
wtWebGraphAnalog57661ReportTcpIpAddrmandatory Name or IP address of the TCP server which accepts the trap.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.14
wtWebGraphAnalog57661ReportTcpPortmandatory Port number of the TCP server which accepts the trap.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.15
wtWebGraphAnalog57661ReportTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.16
wtWebGraphAnalog57661ReportClearMailSubjectmandatory Subject line for alarm clear mail.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.17
wtWebGraphAnalog57661ReportClearMailTextmandatory Report clear mail text: <Mn> provides the current temperature; n = 1..2. <Z> provides the current time.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.18
wtWebGraphAnalog57661ReportClearTrapTextmandatory This text is sent in the trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.19
wtWebGraphAnalog57661ReportClearTcpTextmandatory This text is sent in the TCP trap body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.20
wtWebGraphAnalog57661ReportSyslogIpAddrmandatory IP address of the syslog server to which the Webio device should send syslog messages.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.24
wtWebGraphAnalog57661ReportSyslogPortmandatory Port number of the syslog server to which the Webio device should send syslog messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.25
wtWebGraphAnalog57661ReportSyslogTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.26
wtWebGraphAnalog57661ReportSyslogClearTextmandatory Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.27
wtWebGraphAnalog57661ReportFtpDataPortmandatory Local data port: 1..65535 or AUTO: the next free port will be assigned.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.28
wtWebGraphAnalog57661ReportFtpFileNamemandatory Name of the file including path informations.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.29
wtWebGraphAnalog57661ReportFtpTextmandatory Message text to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.30
wtWebGraphAnalog57661ReportFtpClearTextmandatory Report clear message to store on the FTP server.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.31
wtWebGraphAnalog57661ReportFtpOptionmandatory Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STOR…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.1.7.3.1.32

List of settings depending on the sensor number.

wtWebGraphAnalog57661PortEntry row .1.3.6.1.4.1.5040.1.2.28.3.2.1.1

Sensor parameters for the individual sensors.

Indexes

wtWebGraphAnalog57661SensorNo

Column	Syntax	OID
wtWebGraphAnalog57661PortNamemandatory Name of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.1
wtWebGraphAnalog57661PortTextmandatory Description of the sensor.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.2
wtWebGraphAnalog57661PortOffset1mandatory Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.3
wtWebGraphAnalog57661SetPoint1mandatory Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.4
wtWebGraphAnalog57661PortOffset2mandatory Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.5
wtWebGraphAnalog57661SetPoint2mandatory Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.6
wtWebGraphAnalog57661PortCommentmandatory Offset calibration: informations of date, name of operator, reference devices.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.7
wtWebGraphAnalog57661PortSensorSelectmandatory Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.8
wtWebGraphAnalog57661PortUnitmandatory User scale: displayed unit.	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.9
wtWebGraphAnalog57661PortScale0mandatory User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.10
wtWebGraphAnalog57661PortScale100mandatory User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999	OctetStringr/w	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.11
wtWebGraphAnalog57661PortOutputModemandatory This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit 2 in wtWebGraphAnalog57661PortInputMode will be set automat…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.12
wtWebGraphAnalog57661PortInputModemandatory This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 in wtWebGraphAnalog57661PortOutputMode will be set automatic…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.5040.1.2.28.3.2.1.1.13