WWP-XCVR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

wwpXcvrTable

table

.1.3.6.1.4.1.6141.2.14.1.1.1 · 1 row entry · 9 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk wwpXcvrTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-XCVR-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-XCVR-MIB::wwpXcvrTable'

This table contains descriptions and settings for each of the 
physical transceiver devices.

wwpXcvrEntry row .1.3.6.1.4.1.6141.2.14.1.1.1.1

The Transciever Device Entry.

Indexes

No indexes recorded

Column	Syntax	OID
wwpXcvrPortXcvrId Indicates the logical port in-which this transciever belongs to.	Integer32	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.1`
wwpXcvrId The id for the transceiver.	Integer32	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.2`
wwpXcvrFiberType The fiber type of this transceiver. Possible values: lx 1000BASE-LX fiber sx 1000BASE-SX fiber cx 1000BASE-CX fiber t 1000BASE-T unknown Unknow…	Enumeration	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.3`
wwpXcvrVendorName String containing this transceiver's vendor name.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.4`
wwpXcvrPartNum String containing this transceiver's part number.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.5`
wwpXcvrPartRev String containing this tranceiver's part revision.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.6`
wwpXcvrTxEnabled Indicates whether this transceiver is currently set to transmit.	Enumerationr/w	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.7`
wwpXcvrRxSignalStatus Indicates whether this transceiver is currently detecting a Receive (RX) signal.	Enumeration	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.8`
wwpXcvrTxFaultStatus Indicates the fault status of this transceiver.	Enumeration	`.1.3.6.1.4.1.6141.2.14.1.1.1.1.9`

wwpXcvrPortTable

table

.1.3.6.1.4.1.6141.2.14.1.1.2 · 1 row entry · 5 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk wwpXcvrPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-XCVR-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-XCVR-MIB::wwpXcvrPortTable'

The table contains of the logical ports which have transceivers.

wwpXcvrPortEntry row .1.3.6.1.4.1.6141.2.14.1.1.2.1

The logical Port Entry.

Indexes

No indexes recorded

Column	Syntax	OID
wwpXcvrPortId Indicates the logical port in-which this transciever belongs to.	Integer32	`.1.3.6.1.4.1.6141.2.14.1.1.2.1.1`
wwpXcvrPortHoldDownTimedeprecated Indicates the hold-down time (in seconds) for this logical port. This value is used to help smooth out possible flapping between XCVRs of the bank when a link goes down. When this HoldDown timer expires, the selected …	Integer32r/w	`.1.3.6.1.4.1.6141.2.14.1.1.2.1.2`
wwpXcvrPortRedOrDiagMode This object can be used to bring the Xcvr to the Manual mode. This also shows the port redundancy status for this logical port.	Enumerationr/w	`.1.3.6.1.4.1.6141.2.14.1.1.2.1.3`
wwpXcvrPortPreferredXcvr Indicates which transceiver is preferred. This transceiver will be used by default, but if it goes down, the alternate will be used.	Integer32r/w	`.1.3.6.1.4.1.6141.2.14.1.1.2.1.4`
wwpXcvrPortActiveXcvr Indicates which transceiver is currently active.	Integer32	`.1.3.6.1.4.1.6141.2.14.1.1.2.1.5`