WWP-MAC-MGMT-MIB Table View

The (conceptual) table listing the mac addresses indexed by
the Vlan, port and the macaddr.

wwpMacMgmtMacEntry row .1.3.6.1.4.1.6141.2.28.1.1.1.1

An entry (conceptual row) in the wwpMacMgmtMacTable.

Indexes

wwpMacMgmtVlanID wwpMacMgmtPortId wwpMacMgmtMacAddr

Column	Syntax	OID
wwpMacMgmtVlanID The vlan id associated with wwpMacMgmtMacAddr and the wwpMacMgmtPortId.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6141.2.28.1.1.1.1.1
wwpMacMgmtPortId Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.28.1.1.1.1.2
wwpMacMgmtMacAddr A unicast MAC address which has either been learned by the port or has been statically configured.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6141.2.28.1.1.1.1.3
wwpMacMgmtMacAddrMode The Mac Addr can be either dynamic or static. For the Static entries the aging time specified by dot1dTpAgingTime does not apply so they stay forever in the Mac Table unless mac table is flushed. Once the wwpMacMgmtSt…	Enumerationr/w Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.6141.2.28.1.1.1.1.4
wwpMacMgmtMacStatus The Mac Address will be disabled or enabled depending upon the protective mode and its Mac Address limit. The added static Mac Address will always be enabled.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6141.2.28.1.1.1.1.5
wwpMacMgmtMacRowStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. The RowStatus can't be set to…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.28.1.1.1.1.6

The (conceptual) table listing the protected mode attributes.

wwpMacMgmtPMEntry row .1.3.6.1.4.1.6141.2.28.1.1.3.1

An entry (conceptual row) in the wwpMacMgmtPMTable.

Indexes

wwpMacMgmtPMVlanID wwpMacMgmtPMPortId

Column	Syntax	OID
wwpMacMgmtPMVlanID The vlan id associated with wwpMacMgmtMacAddr and the wwpMacMgmtPortId.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6141.2.28.1.1.3.1.1
wwpMacMgmtPMPortId Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.28.1.1.3.1.2
wwpMacMgmtPMLearnLimit The maximum number of Mac Addresses which will be learned by this Vlan/port pair. This limits applies only for the dynamic addresses.	Integer32r/w Constraints: range: 0-24	.1.3.6.1.4.1.6141.2.28.1.1.3.1.3
wwpMacMgmtPMLearnCount The number of Mac Addresses learned by this Vlan/Port pair. If the wwpMacMgmtMacStatus is enabled then the max value for this object should be equal to wwpMacMgmtPMLearnLimit.	Integer32 Constraints: range: 0-24	.1.3.6.1.4.1.6141.2.28.1.1.3.1.4
wwpMacMgmtPMStatus To enable the Protection Mode, wwpMacMgmtPMStatus should be set to enable.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6141.2.28.1.1.3.1.5
wwpMacMgmtPMMacFlush Setting this object to 'flush' causes all the dynamic MAC entries for the port/vlan specified by wwpMacMgmtPMPortId/wwpMacMgmtPMVlanID to be deleted. An SNMP read on this object returns 'none' once the flush operati…	Enumerationr/w Enumerated Values: 0 none 1 flush	.1.3.6.1.4.1.6141.2.28.1.1.3.1.6

The (conceptual) table listing the mac addresses indexed by
the Vlan, port and the Mac Index.

wwpMacMgmtCacheMacEntry row .1.3.6.1.4.1.6141.2.28.1.1.5.1

An entry (conceptual row) in the wwpMacMgmtCacheMacTable.

Indexes

wwpMacMgmtCVlanID wwpMacMgmtCPortId wwpMacMgmtCMacIndex

Column	Syntax	OID
wwpMacMgmtCVlanID The vlan id associated with wwpMacMgmtCMacIndex and the wwpMacMgmtCPortId.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6141.2.28.1.1.5.1.1
wwpMacMgmtCPortId Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.28.1.1.5.1.2
wwpMacMgmtCMacIndex Index for this Mac Address.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.28.1.1.5.1.3
wwpMacMgmtCMacAddr A unicast MAC address which has either been learned by the port or has been statically configured.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.6141.2.28.1.1.5.1.4
wwpMacMgmtCMacAddrMode The Mac Addr can be either dynamic or static. For the Static entries the aging time specified by dot1dTpAgingTime does not apply so they stay forever in the Mac Table unless mac table is flushed. Once the wwpMacMgmtSt…	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.6141.2.28.1.1.5.1.5
wwpMacMgmtCMacStatus The Mac Address will be disabled or enabled depending upon the protective mode and its Mac Address limit. The added static Mac Address will always be enabled.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.6141.2.28.1.1.5.1.6

The (conceptual) table listing the mac addresses indexed by
the Vlan and the port.

wwpMacMgmtCacheMacCountEntry row .1.3.6.1.4.1.6141.2.28.1.1.6.1

An entry (conceptual row) in the wwpMacMgmtCacheMacTable.

Indexes

wwpMacMgmtCVlanID wwpMacMgmtCPortId

Column	Syntax	OID
wwpMacMgmtCacheMacCount Count of Mac Addresses associated with this Cache Mac Entry. The count will be shown only for the Vlan/port combination which exists on the box.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.6141.2.28.1.1.6.1.1

The (conceptual) table listing the security access 
control attributes.

wwpMacMgmtSacEntry row .1.3.6.1.4.1.6141.2.28.1.1.7.1

An entry (conceptual row) in the wwpMacMgmtSacTable.

Indexes

wwpMacMgmtSacVlanID wwpMacMgmtSacPortId

Column	Syntax	OID
wwpMacMgmtSacVlanID The VLAN id for this SAC entry.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.6141.2.28.1.1.7.1.1
wwpMacMgmtSacPortId Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePortEntry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.6141.2.28.1.1.7.1.2
wwpMacMgmtSacLearnCount The number of Mac Addresses learned by this Vlan/Port pair. If the wwpMacMgmtMacStatus is enabled then the max value for this object should be equal to wwpMacMgmtSacMaxLearn.	Integer32 Constraints: range: 0-3000	.1.3.6.1.4.1.6141.2.28.1.1.7.1.3
wwpMacMgmtSacMaxLearn The maximum number of Mac Addresses which will be learned by this Vlan/port pair. This limits applies only for the dynamic addresses.	Integer32r/w Constraints: range: 0-3000	.1.3.6.1.4.1.6141.2.28.1.1.7.1.4
wwpMacMgmtSacLearnDisabled Setting this object to 'true' will cause the learning for the port/vlan pair to be shut off.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.6141.2.28.1.1.7.1.5
wwpMacMgmtSacMacFlush Setting this object to 'flush' causes all the dynamic MAC entries for the port/vlan specified by wwpMacMgmtSacPortId/wwpMacMgmtSacVlanID to be deleted. An SNMP read on this object returns 'none' once the flush opera…	Enumerationr/w Enumerated Values: 0 none 1 flush	.1.3.6.1.4.1.6141.2.28.1.1.7.1.6
wwpMacMgmtSacStatus Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. The SAC entry cab be disabled by setting thi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.6141.2.28.1.1.7.1.7