WWP-LEOS-IP-INTERFACE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
27
.1.3.6.1.4.1.6141.2.60.24.1.1.1 · 1 row entry · 5 columns
Table of IP addresses and associated subnet mask.
wwpLeosIpInterfaceEntry entry .1.3.6.1.4.1.6141.2.60.24.1.1.1.1
Interface IP and subnet mask entry.
These interfaces are used to cause the switch CPU to
become involved with the IP traffic. By default, a
minimum of two interfaces must always exist, one for
the local management inte…
Indexes
wwpLeosIpInterfaceIndex
Column Syntax OID
wwpLeosIpInterfaceIndex
Unique index into the table.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.24.1.1.1.1.1
wwpLeosIpInterfaceName
The friendly name for the IP interface.
OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.6141.2.60.24.1.1.1.1.2
wwpLeosIpInterfaceIpAddr
IP address associated with this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.1.1.1.3
wwpLeosIpInterfaceSubnet
The subnet mask associated with this ip address/interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.1.1.1.4
wwpLeosIpInterfaceIfIndexXref
Cross reference to MIB-2 Interfaces ifIndex.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.24.1.1.1.1.5
.1.3.6.1.4.1.6141.2.60.24.1.1.2 · 1 row entry · 3 columns
A table that contains Interface Specific
information maintained by each interface.
wwpLeosIpExtInterfaceEntry entry .1.3.6.1.4.1.6141.2.60.24.1.1.2.1
A list of interfaces additional configuration parameters
maintained by each interface.
Indexes
No indexes recorded
Column Syntax OID
wwpLeosIpInterfaceEnable
The status of each interface. A value of true(1) indicates
that this interface is enabled and a value of
false(2) indicates that this interface is disabled.
The device shouldn't allow the Management Station to disable…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
.1.3.6.1.4.1.6141.2.60.24.1.1.2.1.1
wwpLeosIpInterfaceVlanId
The vlanId associated with this IP interface. The vlan indicated by
wwpLeosIpInterfaceVlanId should exist in the Vlan Table. If an interface
has no VLAN associated, then any read on this object should return
'noSuchIns…
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.6141.2.60.24.1.1.2.1.2
wwpLeosIpInterfaceMgmtPktPriority
The 802.1p Priority value for the management traffic on this interface.
Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.6141.2.60.24.1.1.2.1.3
.1.3.6.1.4.1.6141.2.60.24.1.1.4 · 1 row entry · 10 columns
Data Interface IP and subnet mask entry.
To create a loopback interface in this table, following attributes must be specified.
 wwpLeosIpDataInterfaceIndex
 wwpLeosIpDataInterfaceName
 wwpLeosIpDataInterfaceIpAddr
 wwpLeosIpDataInterfaceType must be set to 'loopback'.
wwpLeosIpDataInterfaceVlanId defaults to 1 and cannot be set or changed.              
No other MIB object should be set otherwise error will be returned.
           
To create a regular Data interface the following
attributes must be specified.
 wwpLeosIpDataInterfaceIndex
 wwpLeosIpDataInterfaceName
 wwpLeosIpDataInterfaceIpAddr
 wwpLeosIpDataInterfaceMask
 wwpLeosIpDataInterfaceVlanId must be specified when
 the interface is created. It cannot be changed after
 creation.
 wwpLeosIpDataRowStatus must be set to 'createAndGo'.
wwpLeosIpDataInterfaceEntry entry .1.3.6.1.4.1.6141.2.60.24.1.1.4.1
Each entry represents a Data interface
configuration parameter.
Indexes
wwpLeosIpDataInterfaceIndex
Column Syntax OID
wwpLeosIpDataInterfaceIndex
Unique index into the table.
Integer32
Constraints:
range: 1-4096
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.1
wwpLeosIpDataInterfaceName
The name for this Data IP interface.
OctetStringr/w
Constraints:
range: 0-15
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.2
wwpLeosIpDataInterfaceIpAddr
IP address associated with this interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.3
wwpLeosIpDataInterfaceMask
The subnet mask associated with this ip address/interface.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.4
wwpLeosIpDataInterfaceVlanId
The vlanId associated with this Data IP interface. This vlan must already
exist on the device. The vlanId must be specified when the interface is
created. It cannot be set after creation. The vlanId cannot be specified…
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.5
wwpLeosIpDataInterfaceType
The type of Data IP interface.
Enumerationr/w
Enumerated Values:
1broadcast
2pointToPoint
3loopBack
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.6
wwpLeosIpDataInterfaceIfIndex
The unique interface index assigned by INET.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.7
wwpLeosIpDataInterfaceMac
MAC address assigned by the device to this Data interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.8
wwpLeosIpDataInterfaceIfMtu
The size of the largest packet which can be
sent/received on the interface, specified in octets.
For interfaces that are used for transmitting network
datagrams, this is the size of the largest network
datagram that can…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.9
wwpLeosIpDataInterfaceRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.
To create a row in this table, a manager must
set this object to 'createAndGo'. To delete a row in this
table, a manager must set this obje…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.6141.2.60.24.1.1.4.1.10
.1.3.6.1.4.1.6141.2.60.24.1.3.1 · 1 row entry · 9 columns
The (conceptual) table listing the display 
parameters for the IP ACL table.
wwpLeosIpAclEntry entry .1.3.6.1.4.1.6141.2.60.24.1.3.1.1
An entry (conceptual row) in the wwpLeosIpAclTable.
Indexes
wwpLeosIpAclEntryIpAddr wwpLeosIpAclEntryIpMask
Column Syntax OID
wwpLeosIpAclEntryIpAddr
This object is the IP network which will be authorized.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.1
wwpLeosIpAclEntryIpMask
This object is the netmask for the IP network which will be authorized.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.2
wwpLeosIpAclEntryPortMask deprecated
This object is used to specify the physical ports which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 27, represents a physical port numbered from
1 to 28. A value of …
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.3
wwpLeosIpAclEntryHits
Count of the number of lookups which matched the table entry.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.4
wwpLeosIpAclEntryBadPort
Count of the number of lookups which failed because the ingress
port was disallowed by the table entry.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.5
wwpLeosIpAclEntryStatus
Set this object to 'CreateAndGo' to create a new table entry, set it
to 'destroy' to remove an existing entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.6
wwpLeosIpAclEntryDscpMask
This object is used to specify the DSCP values for which IP packets
will be allowed to ingress. The mask is big endian and each bit,
numbered from 0 to 63, represents a DSCP value numbered from
0 to 63. A value of 0x…
OctetStringr/w
Constraints:
range: 8-8
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.7
wwpLeosIpAclEntryBadDscp
Count of the number of lookups which failed because the ingress
DSCP value was disallowed by the table entry.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.8
wwpLeosIpAclEntryPortBitMask
This object is used to specify the physical ports which frames will
be allowed to ingress from. The mask is big endian and each bit,
numbered from 0 to 63, represents a physical port numbered from
1 to 64. A value of …
OctetStringr/w
Constraints:
range: 8-8
.1.3.6.1.4.1.6141.2.60.24.1.3.1.1.9