WWP-LEOS-FLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
24
Rows
24
Columns
221

wwpLeosFlowServiceLevelTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.3 · 1 row entry · 15 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceLevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceLevelTable' 
A table of flow service level entries. Following criteria must be met
while creating entry in the table.
- All indexes must be specified
- wwpLeosFlowServiceLevelCirBW and wwpLeosFlowServiceLevelPirBW must be set.
- wwpLeosFlowServiceLevelStatus must be set to create and go.
wwpLeosFlowServiceLevelEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.3.1
The flow service level entry in the Table.
Indexes
Column Syntax OID
wwpLeosFlowServiceLevelDirection
Service level Id direction used as index in the service level entry.
Enumeration
Constraints:
range: 1-4094
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.1
wwpLeosFlowServiceLevelPort
Port id used as index in the service level entry.
If it is intended to not specify the port id in
the index, this value should be set to 0.
Integer32
Constraints:
range: 0-32
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.2
wwpLeosFlowServiceLevelId
Service level Id used as index in the service level entry.
Integer32
Enumerated Values:
1enable
2disable
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.3
wwpLeosFlowServiceLevelName
The flow service level name associated with
this service level.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1create
2delete
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.4
wwpLeosFlowServiceLevelPriority
The internal traffic-queue priority.
This may also be used as a weighting factor.
Integer32r/w
Constraints:
range: 1-4094
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.5
wwpLeosFlowServiceLevelQueueSize
The size of the traffic queue provisioned for
this service level entry. This may also be
referred to as Latency Tolerance.
Enumerationr/w
Enumerated Values:
1other
2static
3dynamicGvrp
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.6
wwpLeosFlowServiceLevelDropEligibility
This item is used to indicate whether or not
frames should be dropped or queued when frame
buffer resources become scarce.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.7
wwpLeosFlowServiceLevelShareEligibility
This item is used to indicate whether or not
a service level may be shared among entries
in the flow service-mapping table.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.8
wwpLeosFlowServiceLevelCirBW
The committed information rate (bandwidth) in
Kbps associated with this service level entry.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.9
wwpLeosFlowServiceLevelPirBW
The peak information rate (maximum bandwidth) in
Kbps associated with this service level entry.
Integer32r/w
Constraints:
range: 1-4094
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.10
wwpLeosFlowServiceStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.

In particular, a newly create…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.11
wwpLeosFlowServiceRedCurveId
This object is used to specifies the red curve index to be
used for the given service level. If this OID is not specified, the system
will use the default value of this object which is dependent on the queue size
wwpLe…
Unsigned32r/w
Constraints:
range: 5-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.12
wwpLeosFlowServiceLevelQueueSizeYellow
The size of the yellow traffic queue provisioned for
this service level entry. Also known as the discard
preferred queue size.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.13
wwpLeosFlowServiceLevelQueueSizeRed
The size of the red traffic queue provisioned for
this service level entry. Also known as the
discard wanted queue size
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.14
wwpLeosFlowServiceLevelFlowGroup
Service level Id direction used as index in the service level entry.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.3.1.15

wwpLeosFlowServiceMappingTable

table deprecated
.1.3.6.1.4.1.6141.2.60.6.1.1.4 · 1 row entry · 13 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceMappingTable' 
A service mapping entry in the service-mapping table.
To create entry in this table following criteria must be met and SNMP
multiple set operation must be used to create entries.
- wwpLeosFlowServiceMapDstSlidId must be set to valid SLID and this slid must exist 
  on the device. Use wwpLeosFlowServiceLevelTable to create slid.
- All indexes must be specified with exception to following objects.
- wwpLeosFlowServiceMappingVid must be set to 0 if don't care else 
  set it to some valid value. VID must exist on the device.
- wwpLeosFlowServiceMappingSrcPort must be set to 0 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMappingSrcTag must be set to 0 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMappingDstPort must be set to 0 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMappingDstTag must be set to 0 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMappingProtocolType must be set to 1 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMappingProtocolPortNum must be set to 0 if don't care else 
  set it to some valid value.
- wwpLeosFlowServiceMapSrcPri must be set to 255 if don't care else 
  set it to some valid value.
wwpLeosFlowServiceMappingEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.4.1
A service mapping entry in the wwpLeosFlowServiceMappingTable.
Indexes
Column Syntax OID
wwpLeosFlowServiceMapViddeprecated
The VLAN id associated with this service
mapping entry. If this object is set to 0,
then this object should be ignored while
creating the service-mapping entry.
Integer32
Constraints:
range: 0-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.1
wwpLeosFlowServiceMapSrcPortdeprecated
The source port id for the instance. This
represents the ingress location of a flow.
This port id should refer to the dot1dBasePort
in the Dot1dBasePortEntry. If this object is
set to 0, then this object should be…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.2
wwpLeosFlowServiceMapSrcTagdeprecated
The source VLAN tag associated with this
service mapping entry. If this object is set
to 0, then this object should be ignored while creating the
service-mapping entry.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.3
wwpLeosFlowServiceMapDstPortdeprecated
The destination port id for the instance. This
represents the egress location for a flow. This
port id should refer to the dot1dBasePort in the
Dot1dBasePortEntry. If this object is set to 0,
then this object should…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.4
wwpLeosFlowServiceMapDstTagdeprecated
The destination VLAN tag associated with this service
mapping entry. If this object is set to 0, then this
object should be ignored while creating the service-mapping
entry.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.5
wwpLeosFlowServiceMapSrcPrideprecated
The incoming packet vlan tag priority on the wwpLeosFlowServiceMapSrcPort.
The 802.1p packet priority valid values are only from 0 to 7. If this
object is set to 255 (or signed 8-bit integer -1), then this object
sho…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.6
wwpLeosFlowServiceMapProtocolTypedeprecated
The Layer 4 protocol type used as index in the table. This will
correspond to the TCP or UDP protocol. If this object is set to 1,
then this object should be ignored while creating the service-mapping
entry.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.7
wwpLeosFlowServiceMapProtocolPortNumdeprecated
The Layer 4 protocol port number used as index in the table. This will
correspond to a TCP or UDP port number. If this object is set to 0,
then this object should be ignored while creating the service-mapping
entry.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.8
wwpLeosFlowServiceMapDstSlidIddeprecated
The service level id to apply to the flow at egress. If this object is set
to 0, then this object should be ignored while creating the service-mapping
entry.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.9
wwpLeosFlowServiceMapSrcSlidIddeprecated
The service level id to apply to the flow at ingress. If this object is set
to 0, then this object should be ignored while creating the service-mapping
entry.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.10
wwpLeosFlowServiceMapPriRemarkStatusdeprecated
Setting this object to 'true' will enable remarking of the VLAN tag priority
for frames that match the classification defined by this service-mapping entry.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.11
wwpLeosFlowServiceMapRemarkPrideprecated
The remark priority value. For frames that match the
classification defined by this service-mapping entry,
the VLAN tag priority will be remarked with this value.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.12
wwpLeosFlowServiceMapStatusdeprecated
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.4.1.13

wwpLeosFlowServiceACTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.5 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceACTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceACTable' 
A Table of FLOW Service Access Control Entries.
wwpLeosFlowServiceACEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.5.1
A service Access entry in the
wwpLeosFlowServiceACTable.
Indexes
Column Syntax OID
wwpLeosFlowServiceACPortId
Port id for the instance. This port id should refer
to the dot1dBasePort in the Dot1dBasePortEntry.
Used as index in service access table.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.1
wwpLeosFlowServiceACVid
The VLAN id associated with this access control entry.
Used as index in service access table. If the platform
supports only port-based service access control, this
value should be set to 0.
Integer32
Constraints:
range: 0-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.2
wwpLeosFlowServiceACMaxDynamicMacCount
The maximum number of dynamic MAC Addresses that will
be learned and authorized by this access control entry.
This value should default to 24.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.3
wwpLeosFlowServiceACDynamicNonFilteredMacCount
The current number of non-filtered or authorized dynamic
MAC addresses recorded in this access control entry.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.4
wwpLeosFlowServiceACDynamicFilteredMacCount
The current number of filtered or non-authorized dynamic
MAC addresses recorded in this access control entry.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.5
wwpLeosFlowServiceACStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.7
wwpLeosFlowServiceACForwardLearning
To specify whether or not unlearned frames are forwarded or dropped.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.5.1.50

wwpLeosFlowStaticMacTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowStaticMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowStaticMacTable' 
The (conceptual) table to add the static mac addresses.
wwpLeosFlowStaticMacEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.6.1
An entry (conceptual row) in the wwpLeosFlowStaticMacTable.
Indexes
Column Syntax OID
wwpLeosFlowSMVid
The service network id associated with this
entry. Used as index in static MAC table.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.6.1.1
wwpLeosFlowSMMacAddr
A unicast MAC address to be statically
configured. Used as index in static MAC
table.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.6.1.1.6.1.2
wwpLeosFlowSMPortId
Port id for the static MAC instance. This port
id should refer to the dot1dBasePort in the
Dot1dBasePortEntry.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.6.1.3
wwpLeosFlowSMTag
The VLAN tag for this static MAC instance.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.6.1.4
wwpLeosFlowSMStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
In particular, a newly created row cannot be…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.6.1.5

wwpLeosFlowLearnTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.7 · 1 row entry · 10 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowLearnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowLearnTable' 
A Table of flow learn entries.
wwpLeosFlowLearnEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.7.1
A flow learn entry in the wwpLeosFlowLearnTable.
Indexes
Column Syntax OID
wwpLeosFlowLearnVid
The VLAN id associated with this flow-learn entry.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.1
wwpLeosFlowLearnAddr
The address associated with this flow learn entry.
Address can be layer 2 mac address or layer 3 ip address.
If address is layer 3 ip address then first two bytes will be 0.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.2
wwpLeosFlowLearnSrcPort
Source port Id for the instance.
This port Id should refer to the dot1dBasePort
in the Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.3
wwpLeosFlowLearnSrcTag
The source VLAN tag associated with this flow-learn entry.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.4
wwpLeosFlowLearnSrcPri
The source Layer 2 priority associated with this flow-learn entry.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.5
wwpLeosFlowLearnAddrType
The address type associated with this flow-learn entry.
Address can be layer 2 type or layer 3 type.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.6
wwpLeosFlowLearnDstPort
Destination port id associated with this flow-learn entry.
This port id should refer to the dot1dBasePort in the
Dot1dBasePortEntry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.7
wwpLeosFlowLearnDstTag
The destination VLAN tag associated with this flow-learn entry.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.8
wwpLeosFlowLearnType
The flow-learn entry type. This indicates whether or not the
device was learned dynamically or entered as a static MAC.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.9
wwpLeosFlowLearnIsFiltered
This value indicates whether or not the flow-learn entry is filtered.
A value of 'true' indicates the flow-learn entry is filtered.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.6.1.1.7.1.10

wwpLeosFlowServiceStatsTable

table deprecated
.1.3.6.1.4.1.6141.2.60.6.1.1.8 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceStatsTable' 
A Table of flow service statistics entries.
wwpLeosFlowServiceStatsEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.8.1
A flow service statistics entry in the
wwpLeosFlowServiceStatsTable.
Indexes
Column Syntax OID
wwpLeosFlowServiceStatsRxHideprecated
The number of bytes received for this flow service
entry. This counter represents the upper 32 bits
of the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.8.1.1
wwpLeosFlowServiceStatsRxLodeprecated
The number of bytes received for this flow service
entry. This counter represents the lower 32 bits
of the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.8.1.2
wwpLeosFlowServiceStatsTxHideprecated
The number of bytes transmitted for this flow service
entry. This counter represents the upper 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.8.1.3
wwpLeosFlowServiceStatsTxLodeprecated
The number of bytes transmitted for this flow service
entry. This counter represents the lower 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.8.1.4
wwpLeosFlowServiceStatsTypedeprecated
Specifies the type of statistics for given entry.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.8.1.5

wwpLeosFlowMacFindTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.9 · 1 row entry · 4 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowMacFindTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowMacFindTable' 
A flow MAC-find table. MAC address must be specified to walk through the MIB.
wwpLeosFlowMacFindEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.9.1
A flow service MAC statistics table.
Indexes
Column Syntax OID
wwpLeosFlowMacFindMacAddr
This variable defines the mac address
used as index in the MAC-find table.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.6141.2.60.6.1.1.9.1.1
wwpLeosFlowMacFindVlanId
The VLAN ID on which this MAC address is learned.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.9.1.2
wwpLeosFlowMacFindPort
This specifies the port id on which this MAC address is learned.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.9.1.3
wwpLeosFlowMacFindVlanTag
This specifies the VLAN tag on which this MAC address is learned.
Integer32
Constraints:
range: 1-24576
 .1.3.6.1.4.1.6141.2.60.6.1.1.9.1.4

wwpLeosFlowPriRemapTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowPriRemapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowPriRemapTable' 
The (conceptual) table to add the static mac addresses.
wwpLeosFlowPriRemapEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.10.1
An entry (conceptual row) in the wwpLeosFlowStaticMacTable.
Indexes
Column Syntax OID
wwpLeosFlowUserPri
Specifies the user priority. Also used as index in the table.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.10.1.1
wwpLeosFlowRemappedPri
Specifies the remapped priority for given 'wwpLeosFlowUserPri'.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.10.1.2

wwpLeosFlowSMappingTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.13 · 1 row entry · 13 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowSMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingTable' 
A service mapping entry in the service-mapping table.
To create entry in this table following criteria must be met.
- The indexes to the service mapping entry consist of type-value pairs.
- There are four(4) sections to the entry.
 -- NETWORK          (type / value)
 -- SOURCE           (type / value)
 -- DESTINATION      (type / value)
 -- CLASS OF SERVICE (type / value)
- All indexes must be specified with the appropriate enumerated
- type.  If the TYPE is set to 'none', the corresponding VALUE
- MUST be set to zero(0).
-
- The service-mapping entry is very generic.  As such, acceptable
- combinations of types and values will be scrutinized by the
- running platform.
wwpLeosFlowSMappingEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.13.1
A service mapping entry in the wwpLeosFlowSMappingTable.
Indexes
Column Syntax OID
wwpLeosFlowSMappingNetType
This object specifies the NETWORK object TYPE for the entry.
-
- If set to 'none', the corresponding value in
- wwpLeosFlowSMappingNetValue MUST be zero(0).
-
- If set to vlan, a valid vlan-id must be specified.
- If se…
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.1
wwpLeosFlowSMappingNetValue
This object specifies the NETWORK object ID for the entry.
-
- This item must be set according to the value set
- in wwpLeosFlowSMappingNetType. If wwpLeosFlowSMappingNetType
- equals:
- none(1): MUST be set to zero…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.2
wwpLeosFlowSMappingSrcType
This object specifies the SOURCE object TYPE for the entry.
-
- If set to 'none', the corresponding value in
- wwpLeosFlowSMappingSrcValue MUST be zero(0).
-
- If set to port, a valid port group id must be specified.
- …
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.3
wwpLeosFlowSMappingSrcValue
This object specifies the SOURCE object ID for the entry.
-
- This item must be set according to the value set
- in wwpLeosFlowSMappingSrcType. If wwpLeosFlowSMappingSrcType
- equals:
- none(1): MUST be set to zer…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.4
wwpLeosFlowSMappingDstType
This object specifies the DESTINATION object TYPE for the entry.
-
- If set to 'none', the corresponding value in
- wwpLeosFlowSMappingDstValue MUST be zero(0).
-
- If set to port, a valid port group id must be specifie…
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.5
wwpLeosFlowSMappingDstValue
This object specifies the DESTINATION object ID for the entry.
-
- This item must be set according to the value set
- in wwpLeosFlowSMappingDstType. If wwpLeosFlowSMappingDstType
- equals:
- none(1): MUST be set t…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.6
wwpLeosFlowSMappingCosType
This object specifies the CLASS OF SERVICE object TYPE for the entry.
-
- If set to 'none', the corresponding value in
- wwpLeosFlowSMappingCosValue MUST be zero(0).
-
- If set to tcpSrcPort, tcpDstPort, udpSrcPort, or …
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.7
wwpLeosFlowSMappingCosValue
This object specifies the CLASS OF SERVICE object ID for the entry.
-
- This item must be set according to the value set
- in wwpLeosFlowSMappingCosType. If wwpLeosFlowSMappingCosType
- equals:
- none(1): MUS…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.8
wwpLeosFlowSMappingDstSlid
The service level id to apply to the flow at the destination point. Depending on the platform
this object may or may not be set to 0 while creating the service-mapping
entry. The corresponding destination-port and sli…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.9
wwpLeosFlowSMappingSrcSlid
The service level ID to apply to the flow at the source-port. Depending on the platform
this object may or may not be set to 0 while creating the service-mapping
entry. The corresponding source-port and SLID must exi…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.10
wwpLeosFlowSMappingStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.11
wwpLeosFlowSMappingRedCurveOffset
This object specifies the red curve offset to be used for given
service mapping. If this object is not set then the device will choose default red curve offset
which is 0.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.12
wwpLeosFlowSMappingCpuPort
This object specifies if the CPU port is to be used as the src port.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.6.1.1.13.1.13

wwpLeosFlowSMappingStatsTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.14 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowSMappingStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowSMappingStatsTable' 
A Table of flow service statistics entries.
wwpLeosFlowSMappingStatsEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.14.1
A flow service statistics entry in the
wwpLeosFlowSMappingStatsTable.
Indexes
Column Syntax OID
wwpLeosFlowSMappingStatsRxHi
The number of bytes received for this flow service
entry. This counter represents the upper 32 bits
of the counter value
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.14.1.1
wwpLeosFlowSMappingStatsRxLo
The number of bytes received for this flow service
entry. This counter represents the lower 32 bits
of the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.14.1.2
wwpLeosFlowSMappingStatsTxHi
The number of bytes transmitted for this flow service
entry. This counter represents the upper 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.14.1.3
wwpLeosFlowSMappingStatsTxLo
The number of bytes transmitted for this flow service
entry. This counter represents the lower 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.14.1.4
wwpLeosFlowSMappingStatsType
Specifies the type of statistics for given entry.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.14.1.5

wwpLeosFlowCosSync1dToExpTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.15 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosSync1dToExpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosSync1dToExpTable' 
A table of flow cos sync 1d to exp entries.
Entries cannot be created or destroyed.
wwpLeosFlowCosSync1dToExpEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.15.1
A flow cos sync 1d to 1d entry in the wwpLeosFlowCosSync1dToExpTable.
Indexes
Column Syntax OID
wwpLeosFlowCosSync1dToExpMapFrom
This object is used as index in the table and represents
cos 1d priority. Any frame coming in with this priority will be
synchronized with priority specified by wwpLeosFlowCosSync1dToExpMapTo.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.15.1.1
wwpLeosFlowCosSync1dToExpMapTo
This object specifies the remapped exp value of the frame
which ingresses with dot1d priority of wwpLeosFlowCosSync1dToExpMapFrom.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.15.1.2

wwpLeosFlowCosSyncExpTo1dTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.16 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosSyncExpTo1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosSyncExpTo1dTable' 
A table of flow cos sync 1d to exp entries.
wwpLeosFlowCosSyncExpTo1dEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.16.1
A flow cos sync 1d to 1d entry in the wwpLeosFlowCosSyncExpTo1dTable.
Indexes
Column Syntax OID
wwpLeosFlowCosSyncExpTo1dMapFrom
This object is used as index in the table and represents
cos 1d priority. Any frame coming in with this priority will be
synchronized with priority specified by wwpLeosFlowCosSyncExpTo1dMapTo.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.16.1.1
wwpLeosFlowCosSyncExpTo1dMapTo
This object specifies the remapped exp value of the frame
which ingresses with dot1d priority of wwpLeosFlowCosSyncExpTo1dMapFrom.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.16.1.2

wwpLeosFlowCosSyncIpPrecTo1dTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.17 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosSyncIpPrecTo1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosSyncIpPrecTo1dTable' 
A table of flow cos sync IP precedence to 1d entries.
wwpLeosFlowCosSyncIpPrecTo1dEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.17.1
A flow cos sync Ip Precedence to 1d entry in the wwpLeosFlowCosSyncIpPrecTo1dTable.
Indexes
Column Syntax OID
wwpLeosFlowCosSyncIpPrecTo1dMapFrom
This object is used as index in the table and represents
ip precedence value. Any frame coming in with wwpLeosFlowCosSyncIpPrecTo1dMapFrom
IP precedence will be synchronized with dot1d specified by
wwpLeosFlowCosSync…
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.17.1.1
wwpLeosFlowCosSyncIpPrecTo1dMapTo
This object specifies the ip precedence value to synchronize with when the
frame ingresses with ip precedence value of wwpLeosFlowCosSyncIpPrecTo1dMapFrom.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.17.1.2

wwpLeosFlowCosSyncStdPhbTo1dTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.18 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosSyncStdPhbTo1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosSyncStdPhbTo1dTable' 
A table of flow cos sync standard per hop behavior to 1d or Exp entries.
wwpLeosFlowCosSyncStdPhbTo1dEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.18.1
A flow cos sync standard per hop behavior to 1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
Indexes
Column Syntax OID
wwpLeosFlowCosSyncStdPhbTo1dMapFrom
This object is used as index in the table and represents
AFx or EF value. Any frame coming in with wwpLeosFlowCosSyncStdPhbTo1dMapFrom
AFx or EF value will be synchronized with dot1d priority specified by
wwpLeosFlow…
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.18.1.1
wwpLeosFlowCosSyncStdPhbTo1dMapTo
This object specifies the AFx or EF dscp value to synchronize with when the
frame ingresses with AFx or EF dscp value of wwpLeosFlowCosSyncDscpTo1dMapTo.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.18.1.2

wwpLeosFlowL2SacTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.19 · 1 row entry · 8 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowL2SacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowL2SacTable' 
A table of flow l2 sac table.
wwpLeosFlowL2SacEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.19.1
Represents each entry in the l2 Sac Table
Indexes
Column Syntax OID
wwpLeosFlowL2SacPortId
This mib object is index in the table. If port is not involved in L2 SAC then set this value to 0.
0 represents don't care.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.1
wwpLeosFlowL2SacNetType
This mib object is used as index in the table. This object specifies how wwpLeosFlowSacValue should be interpreted.
If this object is set to none then the wwpLeosFlowSacValue must be set to 0.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.2
wwpLeosFlowSacNetValue
This mib object is used as index in the table. This object is only meaningful if wwpLeosFlowL2SacNetType is not set to none.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.3
wwpLeosFlowL2SacLimit
This mib object specifies the l2 SAC limit. Device will not learn any mac greater than the
limit specified by this object.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.4
wwpLeosFlowL2SacCurMac
This mib object specifies the current mac count for the given l2 SAC entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.5
wwpLeosFlowL2SacCurFilteredMac
This mib object specifies the current number of filtered macs for the given l2 SAC entry.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.6
wwpLeosFlowL2SacOperState
This mib object specifies the current operation state for the given l2 SAC entry.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.7
wwpLeosFlowL2SacRowStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.60.6.1.1.19.1.8

wwpLeosFlowServiceRedCurveTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.24 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceRedCurveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceRedCurveTable' 
A table to configure flow service red curve table.
wwpLeosFlowServiceRedCurveEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.24.1
Represents each entry in the flow service RED curve table.
Indexes
Column Syntax OID
wwpLeosFlowServiceRedCurveIndex
This object is used as index in the red curve table.
Unsigned32
Constraints:
range: 5-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.1
wwpLeosFlowServiceRedCurveName
This object specifies the name of the red curve.
OctetStringr/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.2
wwpLeosFlowServiceRedCurveState
This object specifies the current state of the red curve. This object can be set to enable or disable.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.3
wwpLeosFlowServiceRedCurveMinThreshold
This represents the minimum threshold in KBytes.
When the queue length associated with this service reaches this number,
RED begins to drop packets matching this Service-Mappings traffic classification.
The valid ra…
kbpsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.4
wwpLeosFlowServiceRedCurveMaxThreshold
This represents the maximum threshold in KBytes. When the queue length associated with this service reaches this
number, RED drops packets matching this Service-Mappings traffic classification at the rate specified in…
kbpsUnsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.5
wwpLeosFlowServiceRedCurveDropProbability
This object specifies the drop probability of a packet (matching this Service-Mapping classification) of being
dropped when the queue length associated with this Service-Level reaches the value configured in wwpLeosFlo…
Unsigned32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.6
wwpLeosFlowServiceRedCurveUnset
Setting this object to true will reset the red curve settings to factory
defaults.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.6.1.1.24.1.7

wwpLeosFlowCos1dToRedCurveOffsetTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.25 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCos1dToRedCurveOffsetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCos1dToRedCurveOffsetTable' 
A table of flow cos 1d to red curve offset entries.
wwpLeosFlowCos1dToRedCurveOffsetEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.25.1
A table entry of flow cos 1d to red curve offset.
Indexes
Column Syntax OID
wwpLeosFlowCos1dToRedCurveOffset1dValue
This object is used as index in the table and represents
cos 1d priority. Any frame coming in with this priority will be
mapped to red cos offset value specified by wwpLeosFlowCos1dToRedCurveOffsetValue.
Unsigned32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.25.1.1
wwpLeosFlowCos1dToRedCurveOffsetValue
This object specifies the red curve offset value to be used when frame
which ingresses with dot1d priority specified by wwpLeosFlowCos1dToRedCurveOffset1dValue.
Unsigned32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.6141.2.60.6.1.1.25.1.2

wwpLeosFlowCosMapPCPTo1dTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.26 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosMapPCPTo1dTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosMapPCPTo1dTable' 
A table of flow cos mapping of PCP to .1d Pri.
wwpLeosFlowCosMapPCPTo1dEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.26.1
A flow cos sync standard per hop behavior to 1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
Indexes
Column Syntax OID
wwpLeosFlowCosMapPCPTo1dMapFrom
This object is used as index in the table and represents
PCP priority. Any frame coming in with wwpLeosFlowCosMapPCPTo1dMapFrom
priority will be mapped to .1d priority specified by wwpLeosFlowCosMapPCPTo1dMapTo.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.26.1.1
wwpLeosFlowCosMapPCPTo1dMapTo
This object specifies the .1d priority to map with when the
frame ingresses with PCP priority specified by wwpLeosFlowCosMapPCPTo1dMapFrom.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.26.1.2

wwpLeosFlowCosMap1dToPCPTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.27 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCosMap1dToPCPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCosMap1dToPCPTable' 
A table of flow cos mapping of PCP to .1d Pri.
wwpLeosFlowCosMap1dToPCPEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.27.1
A flow cos sync standard per hop behavior to 1d entry in the
wwpLeosFlowCosSyncStdPhbTo1dTable.
Indexes
Column Syntax OID
wwpLeosFlowCosMap1dToPCPMapFrom
This object is used as index in the table and represents
PCP priority. Any frame coming in with wwpLeosFlowCosMap1dToPCPMapFrom
priority will be mapped to .1d priority specified by wwpLeosFlowCosMap1dToPCPMapTo.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.27.1.1
wwpLeosFlowCosMap1dToPCPMapTo
This object specifies the .1d priority to map with when the
frame ingresses with PCP priority specified by wwpLeosFlowCosMap1dToPCPMapFrom.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.6141.2.60.6.1.1.27.1.2

wwpLeosFlowCpuRateLimitTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.31 · 1 row entry · 34 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCpuRateLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCpuRateLimitTable' 
A table of flow rate limit entries.
wwpLeosFlowCpuRateLimitEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.31.1
The flow service level entry in the Table.
Indexes
Column Syntax OID
wwpLeosFlowCpuRateLimitPort
Port id used as index in the rate limit entry.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.1
wwpLeosFlowCpuRateLimitEnable
Enable is used to activate the port-associated rate-limits.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.2
wwpLeosFlowCpuRateLimitBootp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.3
wwpLeosFlowCpuRateLimitCfm
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.4
wwpLeosFlowCpuRateLimitCft
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.5
wwpLeosFlowCpuRateLimitDot1x
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.6
wwpLeosFlowCpuRateLimitOam
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.7
wwpLeosFlowCpuRateLimitEprArp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.8
wwpLeosFlowCpuRateLimitIgmp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.9
wwpLeosFlowCpuRateLimitInet
Port packet-per-second rate limit for packet type .
Integer32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.10
wwpLeosFlowCpuRateLimitLacp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.11
wwpLeosFlowCpuRateLimitLldp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.12
wwpLeosFlowCpuRateLimitMpls
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.13
wwpLeosFlowCpuRateLimitMstp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.14
wwpLeosFlowCpuRateLimitPeArp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.15
wwpLeosFlowCpuRateLimitPvst
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.16
wwpLeosFlowCpuRateLimitRstp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.17
wwpLeosFlowCpuRateLimitLpbk
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.18
wwpLeosFlowCpuRateLimitRmtLpbk
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.19
wwpLeosFlowCpuRateLimitCxeRx
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.20
wwpLeosFlowCpuRateLimitCxeTx
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.21
wwpLeosFlowCpuRateLimitTwamp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.22
wwpLeosFlowCpuRateLimitDflt
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.23
wwpLeosFlowCpuRateLimitTwampRsp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.24
wwpLeosFlowCpuRateLimitMultiCast
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.25
wwpLeosFlowCpuRateLimitBroadCast
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.26
wwpLeosFlowCpuRateLimitArp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.27
wwpLeosFlowCpuRateLimitIcmp
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.28
wwpLeosFlowCpuRateLimitTcpSyn
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.29
wwpLeosFlowCpuRateLimitRaps
Port packet-per-second rate limit for packet type.
Not supported on 4.x
Integer32r/w
Constraints:
range: 0-2500
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.30
wwpLeosFlowCpuRateLimitIpMgmt
Port packet-per-second rate limit for packet type.
Not supported on 4.x
Integer32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.31
wwpLeosFlowCpuRateLimitIpControl
Port packet-per-second rate limit for packet type.
Not supported on 4.x
Integer32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.32
wwpLeosFlowCpuRateLimitIpV6Mgmt
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.33
wwpLeosFlowCpuRateLimitInet6
Port packet-per-second rate limit for packet type.
Integer32r/w
Constraints:
range: 0-5000
 .1.3.6.1.4.1.6141.2.60.6.1.1.31.1.34

wwpLeosFlowCpuRateLimitStatsTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.32 · 1 row entry · 65 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCpuRateLimitStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCpuRateLimitStatsTable' 
A table of flow rate limit statistics entries.
wwpLeosFlowCpuRateLimitStatsEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.32.1
The rate limit statistics entry in the Table.
Indexes
Column Syntax OID
wwpLeosFlowCpuRateLimitStatsPort
Port id used as index in the rate limit entry.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.1
wwpLeosFlowCpuRateLimitStatsBootpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.2
wwpLeosFlowCpuRateLimitStatsCfmPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.3
wwpLeosFlowCpuRateLimitStatsCftPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.4
wwpLeosFlowCpuRateLimitStatsDot1xPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.5
wwpLeosFlowCpuRateLimitStatsOamPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.6
wwpLeosFlowCpuRateLimitStatsEprArpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.7
wwpLeosFlowCpuRateLimitStatsIgmpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.8
wwpLeosFlowCpuRateLimitStatsInetPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.9
wwpLeosFlowCpuRateLimitStatsLacpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.10
wwpLeosFlowCpuRateLimitStatsLldpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.11
wwpLeosFlowCpuRateLimitStatsMplsPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.12
wwpLeosFlowCpuRateLimitStatsMstpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.13
wwpLeosFlowCpuRateLimitStatsPeArpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.14
wwpLeosFlowCpuRateLimitStatsPvstPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.15
wwpLeosFlowCpuRateLimitStatsRstpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.16
wwpLeosFlowCpuRateLimitStatsLpbkPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.17
wwpLeosFlowCpuRateLimitStatsRmtLpbkPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.18
wwpLeosFlowCpuRateLimitStatsCxeRxPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.19
wwpLeosFlowCpuRateLimitStatsCxeTxPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.20
wwpLeosFlowCpuRateLimitStatsTwampPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.21
wwpLeosFlowCpuRateLimitStatsDfltPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.22
wwpLeosFlowCpuRateLimitStatsBootpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.23
wwpLeosFlowCpuRateLimitStatsCfmDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.24
wwpLeosFlowCpuRateLimitStatsCftDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.25
wwpLeosFlowCpuRateLimitStatsDot1xDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.26
wwpLeosFlowCpuRateLimitStatsOamDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.27
wwpLeosFlowCpuRateLimitStatsEprArpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.28
wwpLeosFlowCpuRateLimitStatsIgmpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.29
wwpLeosFlowCpuRateLimitStatsInetDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.30
wwpLeosFlowCpuRateLimitStatsLacpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.31
wwpLeosFlowCpuRateLimitStatsLldpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.32
wwpLeosFlowCpuRateLimitStatsMplsDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.33
wwpLeosFlowCpuRateLimitStatsMstpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.34
wwpLeosFlowCpuRateLimitStatsPeArpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.35
wwpLeosFlowCpuRateLimitStatsPvstDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.36
wwpLeosFlowCpuRateLimitStatsRstpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.37
wwpLeosFlowCpuRateLimitStatsLpbkDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.38
wwpLeosFlowCpuRateLimitStatsRmtLpbkDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.39
wwpLeosFlowCpuRateLimitStatsCxeRxDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.40
wwpLeosFlowCpuRateLimitStatsCxeTxDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.41
wwpLeosFlowCpuRateLimitStatsTwampDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.42
wwpLeosFlowCpuRateLimitStatsDfltDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.43
wwpLeosFlowCpuRateLimitStatsTwampRspPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.44
wwpLeosFlowCpuRateLimitStatsTwampRspDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.45
wwpLeosFlowCpuRateLimitStatsMultiCastPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.46
wwpLeosFlowCpuRateLimitStatsMultiCastDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.47
wwpLeosFlowCpuRateLimitStatsBroadCastPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.48
wwpLeosFlowCpuRateLimitStatsBroadCastDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.49
wwpLeosFlowCpuRateLimitStatsArpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.50
wwpLeosFlowCpuRateLimitStatsArpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.51
wwpLeosFlowCpuRateLimitStatsIcmpPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.52
wwpLeosFlowCpuRateLimitStatsIcmpDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.53
wwpLeosFlowCpuRateLimitStatsTcpSynPassed
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.54
wwpLeosFlowCpuRateLimitStatsTcpSynDropped
Port packet type counts.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.55
wwpLeosFlowCpuRateLimitStatsRapsPassed
Port packet type counts.Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.56
wwpLeosFlowCpuRateLimitStatsRapsDropped
Port packet type counts.Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.57
wwpLeosFlowCpuRateLimitStatsIpMgmtPassed
Port packet type counts.Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.58
wwpLeosFlowCpuRateLimitStatsIpMgmtDropped
Port packet type counts.Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.59
wwpLeosFlowCpuRateLimitStatsIpControlPassed
Port packet type counts. Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.60
wwpLeosFlowCpuRateLimitStatsIpControlDropped
Port packet type counts. Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.61
wwpLeosFlowCpuRateLimitStatsIpV6MgmtPassed
Port packet type counts. Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.62
wwpLeosFlowCpuRateLimitStatsIpV6MgmtDropped
Port packet type counts. Not supported on 4.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.63
wwpLeosFlowCpuRateLimitStatsInet6Passed
Port packet type counts for Ipv6. Not supported on 6.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.64
wwpLeosFlowCpuRateLimitStatsInet6Dropped
Port packet type counts for Ipv6. Not supported on 6.x
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.32.1.65

wwpLeosFlowCpuRateLimitStatsClearTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.33 · 1 row entry · 2 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowCpuRateLimitStatsClearTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowCpuRateLimitStatsClearTable' 
A table of flow rate limit entries.
wwpLeosFlowCpuRateLimitStatsClearEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.33.1
The flow service level entry in the Table.
Indexes
Column Syntax OID
wwpLeosFlowCpuRateLimitStatsClearPort
Port id used as index in the rate limit statistics clear entry.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.33.1.1
wwpLeosFlowCpuRateLimitStatsClear
Flag indicating whether to clear port packet statistics.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.6141.2.60.6.1.1.33.1.2

wwpLeosFlowServiceTotalStatsTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.34 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowServiceTotalStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowServiceTotalStatsTable' 
A table of flow service statistics entries.
wwpLeosFlowServiceTotalStatsEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.34.1
A flow service statistics entry in the
wwpLeosFlowServiceTotalStatsTable.
Indexes
Column Syntax OID
wwpLeosFlowServiceTotalStatsRxHi
The number of bytes received for this flow service
entry. This counter represents the upper 32 bits
of the counter value
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.34.1.1
wwpLeosFlowServiceTotalStatsRxLo
The number of bytes received for this flow service
entry. This counter represents the lower 32 bits
of the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.34.1.2
wwpLeosFlowServiceTotalStatsTxHi
The number of bytes transmitted for this flow service
entry. This counter represents the upper 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.34.1.3
wwpLeosFlowServiceTotalStatsTxLo
The number of bytes transmitted for this flow service
entry. This counter represents the lower 32 bits of
the counter value.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.60.6.1.1.34.1.4
wwpLeosFlowServiceTotalStatsType
Specifies the type of statistics for given entry.
Enumeration .1.3.6.1.4.1.6141.2.60.6.1.1.34.1.5

wwpLeosFlowPortServiceLevelTable

table
.1.3.6.1.4.1.6141.2.60.6.1.1.40 · 1 row entry · 7 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosFlowPortServiceLevelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-FLOW-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-FLOW-MIB::wwpLeosFlowPortServiceLevelTable' 
A Table of flow Port Service Level  entries.
wwpLeosFlowPortServiceLevelEntry row .1.3.6.1.4.1.6141.2.60.6.1.1.40.1
A flow service statistics entry in the
wwpLeosFlowPortServiceLevelTable.
Indexes
Column Syntax OID
wwpLeosFlowPortServiceLevelPort
Port id used as index in the port service level entry.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.1
wwpLeosFlowPortServiceLevelMaxBandwidth
Sets the max egress bandwidth on a port.
Integer32r/w
Constraints:
range: 0-8000000
 .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.2
wwpLeosFlowPortServiceLevelQueueSize
The size of the traffic queue provisioned for
this port service level entry. This may also be
referred to as Latency Tolerance.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.3
wwpLeosFlowPortServiceLevelQueueSizeYellow
The size of the yellow traffic queue provisioned for
this service level entry. Also known as the discard
preferred queue size.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.4
wwpLeosFlowPortServiceLevelQueueSizeRed
The size of the red traffic queue provisioned for
this service level entry. Also known as the
discard wanted queue size
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.5
wwpLeosFlowPortServiceLevelFlowGroup
Service level Id direction used as index in the service level entry.
Enumerationr/w .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.6
wwpLeosFlowPortServiceLevelRedCurve
This object is used to specifies the red curve index to be
used for the given port service level. If this OID is not
specified, the system will use the default value of this object
which is the default port red-curve (…
Unsigned32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.6141.2.60.6.1.1.40.1.7