WWP-LEOS-EXT-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
14
.1.3.6.1.4.1.6141.2.60.14.1.1.3 · 1 row entry · 9 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosExtLagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-EXT-LAG-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-EXT-LAG-MIB::wwpLeosExtLagTable'
The (conceptual) table listing all the  
aggregators.
wwpLeosExtLagEntry row .1.3.6.1.4.1.6141.2.60.14.1.1.3.1
An entry (conceptual row) in the wwpLeosExtLagTable.
Indexes
Column Syntax OID
Object which specifies a unique entry in the
wwpLeosExtLagTable. A management station wishing
to create a LAG should use a pseudo-random value
for this object when creating an instance of a
wwpLeosExtLagEntry.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.1
The name assigned to this Lag by the Management
station. This object can only be set while creating LAG.
It is not allowed to rename the LAG name once it is created.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.2
The unique identifier allocated to this Aggregator by
the local System. This attribute identifies an
Aggregator instance among the subordinate managed
objects of the containing object.
This value is read-only. This obj…
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.3
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To disable
the aggregator, a management shou…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.4
This object specifies the mode in which given aggregation is operating.
Enumerationr/w
Enumerated Values:
1lacp
2manual
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.5
This object specifies that if the primary port goes from operationally disabled to operationally enabled it
shall become active, and one of the secondary ports shall become backup if this MIB object is set to 'on' and …
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.6
This object specifies the revert protection timer value.
msecInteger32r/w
Constraints:
range: 0-60000
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.7
This object specifies the hash mode used by the aggregation for known unicast frames.
Enumerationr/w
Enumerated Values:
1mac-based
2ip-based
3enhanced
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.8
This object specifies the LACP protection-mode in which given aggregation is operating.
Enumerationr/w
Enumerated Values:
1proprietary
2standard
.1.3.6.1.4.1.6141.2.60.14.1.1.3.1.9
.1.3.6.1.4.1.6141.2.60.14.1.1.4 · 1 row entry · 3 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosLagModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-EXT-LAG-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-EXT-LAG-MIB::wwpLeosLagModeTable'
The (conceptual) table listing the modes of aggregation on each port.
wwpLeosLagModeEntry row .1.3.6.1.4.1.6141.2.60.14.1.1.4.1
An entry (conceptual row) in the wwpLeosLagModeTable.
Column Syntax OID
This object specifies the physical port number.
It is also used as index in the table.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.6141.2.60.14.1.1.4.1.1
This object specifies the administrative mode in which given port is operating.
Enumerationr/w
Enumerated Values:
1lacp
2manual
.1.3.6.1.4.1.6141.2.60.14.1.1.4.1.2
This object specifies the operation mode in which given port is operating.
Enumeration
Enumerated Values:
1lacp
2manual
.1.3.6.1.4.1.6141.2.60.14.1.1.4.1.3
.1.3.6.1.4.1.6141.2.60.14.1.1.5 · 1 row entry · 2 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosLagProtectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-EXT-LAG-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-EXT-LAG-MIB::wwpLeosLagProtectionTable'
The (conceptual) table listing the protection ports for each aggregation.
wwpLeosLagProtectionEntry row .1.3.6.1.4.1.6141.2.60.14.1.1.5.1
An entry (conceptual row) in the wwpLeosLagProtectionTable.
Column Syntax OID
This object specifies the protection port number. It is also used as index in the table.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.6141.2.60.14.1.1.5.1.1
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'. To delete entry set this
object to 'destro…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.14.1.1.5.1.2