WWP-LEOS-BLADE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
18
.1.3.6.1.4.1.6141.2.60.1.1.1.1 · 1 row entry · 8 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosBladeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-BLADE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-BLADE-MIB::wwpLeosBladeTable'
The (conceptual) table listing the Blades configured/detected.
wwpLeosBladeEntry row .1.3.6.1.4.1.6141.2.60.1.1.1.1.1
An entry (conceptual row) in the wwpLeosBladeTable.
Indexes
Column Syntax OID
The object indicates the unique id for the blade.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.1
The object indicates whether this is a control blade,
a line blade or an uplink blade.
Enumeration
Enumerated Values:
1control
2io
3fabric
4single
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.2
The capability file name (including the path,
if applicable) to be read from.
This is the file describing capabilities of the blade
and is required to configure un unequipped blade or
to add a new blade. Length of file…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.3
The object indicates the desired state of the blade.
The administrative state for control blades can be set to disabled
only if the control blade has a functioning backup.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.4
The object indicates the operational state of the blade.
If the blade is detected and the administrative state for
that blade is enabled, then the operational state of the
blade is 'enabled'. If the blade is detected,…
Enumeration
Enumerated Values:
1init
2enabled
3disabled
4faulted
5unequipped
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.5
Base MAC address for the Blade, from which the
mac addresses for the ports on this blade are derived.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.6
The total number of physical ports present on this Blade.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.7
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.
Object in the entry cannot be modified once…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.6141.2.60.1.1.1.1.1.8
.1.3.6.1.4.1.6141.2.60.1.1.1.2 · 1 row entry · 10 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLeosPhyBladeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LEOS-BLADE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LEOS-BLADE-MIB::wwpLeosPhyBladeTable'
The (conceptual) table listing the Blades detected(physically present).
wwpLeosPhyBladeEntry row .1.3.6.1.4.1.6141.2.60.1.1.1.2.1
An entry (conceptual row) in the wwpLeosPhyBladeTable.
Indexes
Column Syntax OID
The time (in hundredths of a second) since the
blade was last re-initialized.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.1
Serial number of the blade, represented as a string.
OctetString
Constraints:
range: 0-127
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.2
Module board hardware revision represented as a string.
OctetString
Constraints:
range: 0-127
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.3
The test result string generated by the POST tests for the blade.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.4
The result code returned by the device POST test.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.5
The date that the blade was manufactured.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.6
Board Description for the blade.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.7
This object defines the number of times that the blade has
been restarted.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.8
Indicates the reason for the last reboot.
Enumeration
Enumerated Values:
1unknown
2snmp
3pwrFail
4appLoad
5errorHandler
6watchdog
7upgrade
8cli
9resetButton
10serviceModeChange
11guardianReboot
12guardianSaosRestart
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.9
Writing one of the specified values to this field causes
the specified type of reboot to occur.

none is the value returned when this leaf is queried.
writing this value to the leaf will have no effec…
Enumerationr/w
Enumerated Values:
1none
2reboot
3rebootReinit
4rebootCustReinit
.1.3.6.1.4.1.6141.2.60.1.1.1.2.1.10