WWP-LAYER4-FILTER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

wwpLayer4FilterTable

table
.1.3.6.1.4.1.6141.2.52.1.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLayer4FilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LAYER4-FILTER-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LAYER4-FILTER-MIB::wwpLayer4FilterTable' 
The (conceptual) table listing the config 
parameters for the Layer 4 filter.
wwpLayer4FilterEntry row .1.3.6.1.4.1.6141.2.52.1.1.3.1
An entry (conceptual row) in the wwpLayer4FilterTable.
Indexes
Column Syntax OID
wwpLayer4FilterName
The locally arbitrary, but unique identifier
associated with this wwpLayer4FilterEntry.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.6141.2.52.1.1.3.1.1
wwpLayer4FilterProtocolNumber
The protocol number for the Layer 4 Filter.
The list of protocol numbers are assigned by
IANA.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.52.1.1.3.1.2
wwpLayer4FilterSrcPort
The traffic addressed to the transport layer
source port specified by this object will
be blocked by this filter. A zero value
for this object will indicate that this object
should be ignored while applying the filter.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.52.1.1.3.1.3
wwpLayer4FilterDstPort
The traffic addressed to the transport layer
destination port specified by this object will
be blocked by this filter. A zero value
for this object will indicate that this object
should be ignored while applying the f…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.6141.2.52.1.1.3.1.4
wwpLayer4FilterStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.

Until instances of all corre…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.52.1.1.3.1.5

wwpLayer4FilterAttachTable

table
.1.3.6.1.4.1.6141.2.52.1.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk wwpLayer4FilterAttachTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WWP-LAYER4-FILTER-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WWP-LAYER4-FILTER-MIB::wwpLayer4FilterAttachTable' 
The (conceptual) table listing the attachment of 
created filters to the VLANs and ports. 
If there is no entry atached with the filter, then
filter is virtually disabled.
wwpLayer4FilterAttachEntry row .1.3.6.1.4.1.6141.2.52.1.1.4.1
An entry (conceptual row) in the wwpLayer4FilterAttachTable.
Indexes
Column Syntax OID
wwpLayer4FilterVid
The vlan id to be associated with this ingress filter.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.1
wwpLayer4FilterAttachType
The attach type for this filter. Setting
this object to 'allow' will allow the traffic
specified by the filter name.
Enumerationr/w
Enumerated Values:
1deny
2allow
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.2
wwpLayer4FilterPortList
The set of ports on which this filter is to be applied.
PortListr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.3
wwpLayer4FilterCounterId
The stats related to this filter will be stored in the
counter specified by this object.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.4
wwpLayer4FilterCount
The stats value in the counter specified by
the wwpLayer4FilterCounterId.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.5
wwpLayer4FilterAttachStatus
Used to manage the creation and deletion of the
conceptual rows in this table.

To create a row in this table, a manager must
set this object to 'createAndGo'.

Until instances of all corre…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.6141.2.52.1.1.4.1.6