WNDAP620 Table View

Column Syntax OID

wlanIndex wmmApEdcaQIndex

Specifies one of the 2 wireless profiles.

Enumeration

Enumerated Values:

24	band2dot4GHz
50	band5GHz

.1.3.6.1.4.1.4526.100.7.12.2.1.1.1

operateMode

This attribute shall indicate the desired wireless operating mode.
The option are:
dot11b - All 802.11b wireless stations can be used.
802.11g wireless stations can still be used
if they can operate in 802.11b mode.…

Enumerationr/w

Enumerated Values:

0	dot11b
1	dot11bg
2	dot11ng
3	dot11a
4	dot11na

.1.3.6.1.4.1.4526.100.7.12.2.1.1.2

radioStatus

This attribute shall indicate the status of radio.
The default value is enable(1).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.3

channel

This attribute shall indicate the channel number to be
used. The default value is auto(0).

Enumerationr/w

Enumerated Values:

0	auto
1	ch1
2	ch2
3	ch3
4	ch4
5	ch5
6	ch6
7	ch7
8	ch8
9	ch9
10	ch10
11	ch11
12	ch12
13	ch13
14	ch14
34	ch34
36	ch36
38	ch38
40	ch40
42	ch42
44	ch44
46	ch46
48	ch48
52	ch52
56	ch56
60	ch60
64	ch64
100	ch100
104	ch104
108	ch108
112	ch112
116	ch116
120	ch120
124	ch124
128	ch128
132	ch132
136	ch136
140	ch140
149	ch149
153	ch153
157	ch157
161	ch161
165	ch165

.1.3.6.1.4.1.4526.100.7.12.2.1.1.4

dataRate

This attribute shall indicate the transmit rate applicable to
802.11b, 802.11bg and 802.11a modes. When the operateMode is:

dot11b(0) - can set to 0:best, 2:1Mb/s, 4:2Mb/s,
11:5.5Mb/s, and 22:11 Mb/s.
…

Enumerationr/w

Enumerated Values:

0	best
2	rate1Mbps
4	rate2Mbps
11	rate5dot5Mbps
12	rate6Mbps
18	rate9Mbps
22	rate11Mbps
24	rate12Mbps
36	rate18Mbps
48	rate24Mbps
72	rate36Mbps
96	rate48Mbps
108	rate54Mbps

.1.3.6.1.4.1.4526.100.7.12.2.1.1.5

wmmSupport

This field indicates the status of WMM(Wireless Multimedia) suport.
The default value is enable(1).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.6

beaconInterval

This attribute shall indicate the Beacon Interval.
The default value is 100.

1024 microsecondInteger32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.4526.100.7.12.2.1.1.7

rtsThreshold

This attribute shall indicate the RTS threshold.
The default value is 2347.

Integer32r/w

Constraints:
range: 0-2347

.1.3.6.1.4.1.4526.100.7.12.2.1.1.8

fragLength

This attribute shall indicate the fragmentation threshold.
The default value is 2346.

Integer32r/w

Constraints:
range: 256-2346

.1.3.6.1.4.1.4526.100.7.12.2.1.1.9

dtimInterval

This attribute shall indicate the beacon delivery traffic
indication message period in multiples of beaconInterval.
The default value is 3.

Integer32r/w

Constraints:
range: 1-255

.1.3.6.1.4.1.4526.100.7.12.2.1.1.10

preambleType

This attribute shall indicate the preamble setting.
This setting is only applicable to 802.11b, 802.11bg
and 802.11ng modes. When set to auto(0), depending on
the station type, AP selects short or long preamble.
The de…

Enumerationr/w

Enumerated Values:

0	auto
1	long

.1.3.6.1.4.1.4526.100.7.12.2.1.1.11

txPower

This attribute shall indicate the transmit power.
The default value is full(0).

Enumerationr/w

Enumerated Values:

0	full
1	half
2	quarter
3	eighth
4	min

.1.3.6.1.4.1.4526.100.7.12.2.1.1.12

accessControlMode

The field indicates whether the access control list is
enabled and the source of the database of the access
control list.

Enumerationr/w

Enumerated Values:

0	disable
1	local
2	server

.1.3.6.1.4.1.4526.100.7.12.2.1.1.13

rogueApDetection

This attribute shall indicate the status of Rogue AP detection.
The default value is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.14

mcsRate

This attribute shall indicate the transmit rate to be used
in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps
when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps
when the channel width is 20Mhz. E…

Enumerationr/w

Enumerated Values:

0	mcs0
1	mcs1
2	mcs2
3	mcs3
4	mcs4
5	mcs5
6	mcs6
7	mcs7
8	mcs8
9	mcs9
10	mcs10
11	mcs11
12	mcs12
13	mcs13
14	mcs14
15	mcs15
16	mcs16
17	mcs17
18	mcs18
19	mcs19
20	mcs20
21	mcs21
22	mcs22
23	mcs23
99	best

.1.3.6.1.4.1.4526.100.7.12.2.1.1.15

guardInterval

This attribute shall indicate the guard interval. When set to auto(0),
depending on the station type, AP selects 400ns or 800ns guard interval.
The default value is auto(0).

Enumerationr/w

Enumerated Values:

0	auto
800	long

.1.3.6.1.4.1.4526.100.7.12.2.1.1.16

channelWidth

This attribute shall set the CWM mode to 20Mhz or 40Mhz
or automatically switches between 20 and 40 based on
channel conditions.
For 11ng mode, the default value is static20Mhz(0), when the channel is auto.
For 11na m…

Enumerationr/w

Enumerated Values:

0	static20Mhz
1	static40Mhz
2	dynamic20-40

.1.3.6.1.4.1.4526.100.7.12.2.1.1.17

ampdu

This attribute shall enable or disable AMPDU aggregation.
It is enabled by default.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.18

ampduAggrLength

This attribute shall set the AMPDU aggregation length.
The default value is 65535.

Integer32r/w

Constraints:
range: 1024-65535

.1.3.6.1.4.1.4526.100.7.12.2.1.1.19

rifsTransmission

This attribute sets the status of rifsTransmission.
The default value of the attribute is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.20

apMode

Specifies the device operation mode.
ap: device operates as an Access Point
p2p: device operates as a point-to-point wireless bridge
No STA are associated to the device in this mode
p2p_ap: device operates as a p…

Enumerationr/w

Enumerated Values:

0	ap
1	p2p
2	p2p-ap
3	p2mp-ap
4	p2mp

.1.3.6.1.4.1.4526.100.7.12.2.1.1.21

uapsdStatus

This attribute shall indicate whether wmm power save.
The default value is enable(1) .

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.22

maxClientAssociations

This attribute shall indicates the max wireless clients that allowed to
associated.When the value is set 0,and the wireless clients are not limited

Integer32r/w

Constraints:
range: 0-128

.1.3.6.1.4.1.4526.100.7.12.2.1.1.23

rogueApDetectionPolicy

This attribute shall indicates the status of Rogue AP detection policy in which frequency AP scans the Rogue AP.
If it is 'mild' set it to 10sec,'moderate' should be 5sec and aggressive will be 1 sec.
The default value …

Enumerationr/w

Enumerated Values:

1	aggressive
5	moderate
10	mild

.1.3.6.1.4.1.4526.100.7.12.2.1.1.24

clientIsolation

This attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.2.1.1.25

vapSettingTable

table

.1.3.6.1.4.1.4526.100.7.12.3.1 · 1 row entry · 19 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk vapSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::vapSettingTable'

VAP attributes setting table.

vapSettingEntry row .1.3.6.1.4.1.4526.100.7.12.3.1.1

VAP attributes setting table entry.

Indexes

wlanIndex vapIndex

Column Syntax OID

vapIndex

Specifies one of the 8 VAP profiles.

Integer32

Constraints:
range: 1-8

.1.3.6.1.4.1.4526.100.7.12.3.1.1.1

vapProfileName

Name of this VAP profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.4526.100.7.12.3.1.1.2

vapProfileStatus

This attribute shall indicate the status of this VAP profile.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.3.1.1.3

ssid

This attribute shall indicate SSID.Its length can't be larger than 32 .

OctetStringr/w

Constraints:
range: 2-32

.1.3.6.1.4.1.4526.100.7.12.3.1.1.4

hideNetworkName

This attribute shall indicate whether to broadcast wireless
network Name (SSID).
The default value of this attribute is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.3.1.1.5

vlanID

This attribute shall indicate the VLAN ID of the VAP.

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.4526.100.7.12.3.1.1.6

clientSecuritySeperation

This attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.3.1.1.7

authenticationType

The field indicates how to authenticate the station.

Enumerationr/w

Enumerated Values:

0	open
1	shared
2	legacy802dot1x
4	wpa
8	wpa2
12	wpaORwpa2
16	wpapsk
32	wpa2psk
48	wpapskORwpa2psk

.1.3.6.1.4.1.4526.100.7.12.3.1.1.8

encryption

The field indicates how to encrypt the packets sent to a station.

Enumerationr/w

Enumerated Values:

0	none
1	wep
2	tkip
4	aes
6	tkipORaes

.1.3.6.1.4.1.4526.100.7.12.3.1.1.9

presharedKey

This attribute shall indicate preshared key used in the following
authenticationtype:
wpapsk(16),
wpa2psk(32),
wpapskORwpa2psk(48).

OctetStringr/w

Constraints:
range: 8-63

.1.3.6.1.4.1.4526.100.7.12.3.1.1.10

wepKeyType

The field shall indicate the type of WEP key.

Enumerationr/w

Enumerated Values:

64	hex64
128	hex128
152	hex152

.1.3.6.1.4.1.4526.100.7.12.3.1.1.11

wepKeyNo

The field indicates the number of default wep key.

Enumerationr/w

Enumerated Values:

1	wepKey1
2	wepKey2
3	wepKey3
4	wepKey4

.1.3.6.1.4.1.4526.100.7.12.3.1.1.12

wepKey1

The field indicates the key value of the first default wep key.

OctetStringr/w

Constraints:
range: 1-40

.1.3.6.1.4.1.4526.100.7.12.3.1.1.13

wepKey2

The field indicates the key value of the second default wep key.

OctetStringr/w

Constraints:
range: 1-40

.1.3.6.1.4.1.4526.100.7.12.3.1.1.14

wepKey3

The field indicates the key value of the third default wep key.

OctetStringr/w

Constraints:
range: 1-40

.1.3.6.1.4.1.4526.100.7.12.3.1.1.15

wepKey4

The field indicates the key value of the fourth default wep key.

OctetStringr/w

Constraints:
range: 1-40

.1.3.6.1.4.1.4526.100.7.12.3.1.1.16

wepPassPhrase

This attribute shall indicate WEP pass phrase, used to
generate four WEP keys.

OctetStringr/w

Constraints:
range: 1-39

.1.3.6.1.4.1.4526.100.7.12.3.1.1.17

incomingQoSPolicy

This attribute shall indicate the policy index to be configured to the selected interface.

Enumerationr/w

Enumerated Values:

0	remove-applied-policy
1	apply-policy-one
2	apply-policy-two
3	apply-policy-three
4	apply-policy-four
5	apply-policy-five
6	apply-policy-six
7	apply-policy-seven
8	apply-policy-eight

.1.3.6.1.4.1.4526.100.7.12.3.1.1.18

outgoingQoSPolicy

This attribute shall indicate the policy index to be configured to the selected interface.

Enumerationr/w

Enumerated Values:

0	remove-applied-policy
1	apply-policy-one
2	apply-policy-two
3	apply-policy-three
4	apply-policy-four
5	apply-policy-five
6	apply-policy-six
7	apply-policy-seven
8	apply-policy-eight

.1.3.6.1.4.1.4526.100.7.12.3.1.1.19

wdsSettingTable

table

.1.3.6.1.4.1.4526.100.7.12.4.1 · 1 row entry · 10 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk wdsSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::wdsSettingTable'

WDS attributes in tablular form to allow for multiple
instances of wds setting profile.

wdsSettingEntry row .1.3.6.1.4.1.4526.100.7.12.4.1.1

An entry in the wdsTable.

Indexes

wlanIndex wdsIndex

Column Syntax OID

wdsIndex

Specifies one of the 4 wireless bridge profiles.

Integer32

Constraints:
range: 1-4

.1.3.6.1.4.1.4526.100.7.12.4.1.1.1

wdsProfileName

Name of the wireless bridge profile.

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.4526.100.7.12.4.1.1.2

wdsProfileStatus

This attribute shall indicate the status of this wireless
bridge profile.

Enumerationr/w

Enumerated Values:

0	disable
1	enable

.1.3.6.1.4.1.4526.100.7.12.4.1.1.3

remoteMacAddress

This attribute shall indicate the link partner's MAC address.

SNMPv2-TCMacAddressr/w

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.4526.100.7.12.4.1.1.4

wdsAuthenticationtype

The field indicates how to authenticate the link partner.

Enumerationr/w

Enumerated Values:

0	open
2	wpapsk
4	wpa2psk

.1.3.6.1.4.1.4526.100.7.12.4.1.1.5

wdsEncryption

The field indicates how to encrypt the packets sent to link partner.

Enumerationr/w

Enumerated Values:

0	none
1	wep
2	tkip
4	aes

.1.3.6.1.4.1.4526.100.7.12.4.1.1.6

wdsPresharedKey

This attribute shall indicate preshared key used by wpapsk or wpa2psk.

OctetStringr/w

Constraints:
range: 8-63

.1.3.6.1.4.1.4526.100.7.12.4.1.1.7

wdsWepKeyType

The field shall indicate the type of WEP key.

Enumerationr/w

Enumerated Values:

64	hex64
128	hex128
152	hex152

.1.3.6.1.4.1.4526.100.7.12.4.1.1.8

wdsWepKey

The field indicates the value of the WEP key.

OctetStringr/w

Constraints:
range: 1-40

.1.3.6.1.4.1.4526.100.7.12.4.1.1.9

wdsWepPassPhrase

This attribute shall indicate WEP pass phrase, used to
generate the WEP key.

OctetStringr/w

Constraints:
range: 1-39

.1.3.6.1.4.1.4526.100.7.12.4.1.1.10

wmmApEdcaSettingTable

table

.1.3.6.1.4.1.4526.100.7.12.5.1 · 1 row entry · 6 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk wmmApEdcaSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::wmmApEdcaSettingTable'

WMM settings for AP EDCA.

wmmApEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.12.5.1.1

AP Enhanced Distribution Channel Access Parameters

Indexes

Column	Syntax	OID
wmmApEdcaQIndex Specifies one of the 4 AP EDCA queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.1`
wmmApEdcaQName Queues are defined for different types of data (video or voice or data) transmitted from AP to station. AC_BE (best effort) IP data is sent to this queue. AC_BK (Background) Bulk data that requires maximum throughput a…	OctetString Constraints: `range: 5-5`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.2`
wmmApEdcaAifs The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us 7: 224us 8: 255us	Integer32r/w Constraints: `range: 0-8`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.3`
wmmApEdcaCwMin This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here in the Minimum Contention Window is the upper limit (in m…	Integer32r/w Constraints: `range: 0-1` `range: 3-3` `range: 7-7` `range: 15-15` `range: 31-31` `range: 63-63` `range: 127-127` `range: 255-255` `range: 511-511` `range: 1023-1023`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.4`
wmmApEdcaCwMax The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling continues until either the data frame is sent or the Maximum …	Integer32r/w Constraints: `range: 0-1` `range: 3-3` `range: 7-7` `range: 15-15` `range: 31-31` `range: 63-63` `range: 127-127` `range: 255-255` `range: 511-511` `range: 1023-1023`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.5`
wmmApEdcaMaxBurst This value specifies (in microseconds) the Maximum Burst Length allowed for packet bursts on the wireless network. A packet burst is a collection of multiple frames transmitted without header information. The decreas…	Integer32r/w Constraints: `range: 0-8192`	`.1.3.6.1.4.1.4526.100.7.12.5.1.1.6`

wmmStaEdcaSettingTable

table

.1.3.6.1.4.1.4526.100.7.12.5.2 · 1 row entry · 6 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk wmmStaEdcaSettingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::wmmStaEdcaSettingTable'

WMM settings for STA EDCA.

wmmStaEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.12.5.2.1

Station Enhanced Distributed Channel Access (EDCA)
Parameters affect traffic flowing from the client station
to the access point

Indexes

wlanIndex wmmStaEdcaQIndex

Column	Syntax	OID
wmmStaEdcaQIndex Specifies one of the 4 STA EDCA Queues. 1: AC_BE 2: AC_BK 3: AC_VI 4: AC_VO	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.1`
wmmStaEdcaQName Queues are defined for different types of data (video or voice or data) transmitted from station-to-AP. AC_BE (best effort) IP data is sent to this queue. AC_BK (Background) Bulk data that requires maximum throughput a…	OctetString Constraints: `range: 5-5`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.2`
wmmStaEdcaAifs The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time (in microseconds) for data frames. 0: 0us 1: 32us 2: 64us 3: 96us 4: 128us 5: 160us 6: 192us 7: 224us 8: 255us	Integer32r/w Constraints: `range: 0-8`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.3`
wmmStaEdcaCwMin This parameter is input to the algorithm that determines the initial random backoff wait time ('window') for retry of a transmission. The value specified here in the Minimum Contention Window is the upper limit (in mi…	Integer32r/w Constraints: `range: 0-1` `range: 3-3` `range: 7-7` `range: 15-15` `range: 31-31` `range: 63-63` `range: 127-127` `range: 255-255` `range: 511-511` `range: 1023-1023`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.4`
wmmStaEdcaCwMax The value specified here in the Maximum Contention Window is the upper limit (in microseconds) for the doubling of the random backoff value. This doubling continues until either the data frame is sent or the Maximum C…	Integer32r/w Constraints: `range: 0-1` `range: 3-3` `range: 7-7` `range: 15-15` `range: 31-31` `range: 63-63` `range: 127-127` `range: 255-255` `range: 511-511` `range: 1023-1023`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.5`
wmmStaEdcaTxopLimit The Transmission Opportunity (TXOP) is an interval of time when a WMM client station has the right to initiate transmissions onto the wireless medium (WM). This value specifies (in microseconds) the Transmission Oppor…	Integer32r/w Constraints: `range: 0-8192`	`.1.3.6.1.4.1.4526.100.7.12.5.2.1.6`

wirelessStatTable

table

.1.3.6.1.4.1.4526.100.7.12.7.2 · 1 row entry · 11 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk wirelessStatTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::wirelessStatTable'

Wireless interface statistics table.

wirelessStatEntry row .1.3.6.1.4.1.4526.100.7.12.7.2.1

Wireless interface statistics.

Indexes

Column	Syntax	OID
wlanRecvUnicastPacket the field indicates the sum of received unicast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.1`
wlanTransUnicastPacket the field indicates the sum of transmitted unicast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.2`
wlanRecvBroadcastPacket the field indicates the sum of received broadcast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.3`
wlanTransBroadcastPacket the field indicates the sum of transmitted broadcast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.4`
wlanRecvMulticastPacket the field indicates the sum of received multicast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.5`
wlanTransMulticastPacket the field indicates the sum of transmitted multicast packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.6`
wlanRecvPacket the field indicates the sum of received packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.7`
wlanTransPacket the field indicates the sum of transmitted packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.8`
wlanRecvBytes the field indicates the sum of received bytes.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.9`
wlanTransBytes the field indicates the sum of transmitted bytes.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.10`
wlanWrongSTAPackets the field indicates the sum of wlan wrong station packets.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.2.1.11`

radioStatusTable

table

.1.3.6.1.4.1.4526.100.7.12.7.4 · 1 row entry · 25 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk radioStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::radioStatusTable'

List of virtual access point in a tabular form.

radioStatusEntry row .1.3.6.1.4.1.4526.100.7.12.7.4.1

An entry in the radioStatusTable.

Indexes

Column	Syntax	OID
numberOfStations This field indicates number of stations associated with wlan .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.1`
wlanRxPacketsTotal The field indicates the total sum of the packets received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.2`
wlanRxBytesTotal The field indicates the total sum of the bytes received.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.3`
wlanTxPacketsTotal The field indicates the total sum of the packets sent.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.4`
wlanTxBytesTotal The field indicates the total sum of the bytes sent.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.5`
wlanDiscardPacketsTotal The field indicates the total sum of the packets discard.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.6`
wlanTxPacketFailTotal The field indicates the total sum of the packets which failed to send.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.7`
wlanTxRetryTotal The field indicates the total sum of the packets which retry to send.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.8`
wlanFcsFailCntTotal The field indicates the total sum of the packets receved which FCS is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.9`
wlanRtsFailCntTotal The field indicates the total sum of the packets receved which RTS is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.10`
wlanAckFailCntTotal The field indicates the total sum of the packets receved which ACK is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.11`
wlanCrcErrorTotal The field indicates the total sum of the packets receved which CRC is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.12`
wlanPhyErrorTotal The field indicates the total sum of the packets receved which PHY is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.13`
wlanMicErrorTotal The field indicates the total sum of the packets receved which MIC is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.14`
wlanKeyErrorTotal The field indicates the total sum of the packets receved which KEY is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.15`
wlanTxFifoErrorTotal The field indicates the total sum of the packets transmit which FIFO is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.16`
wlanRxFifoErrorTotal The field indicates the total sum of the packets recieved which FIFO is error.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.17`
wlanTxPayloadBytesTotal The field indicates the total sum of the wlan packets sent excluding from the ap.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.18`
wlanRxPayloadBytesTotal The field indicates the total sum of the wlan packets received excluding to the ap.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.19`
wlanPacketErrorRateTotal The field indicates the total sum of the received error wlan packets rate.	Integer32 Constraints: `range: 1-100`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.20`
wlanAuthRequestTotal The field indicates the total sum of the authentiacation request from the station.	Integer32 Constraints: `range: 1-100`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.21`
wlanAuthResponseTotal The field indicates the total sum of the authentiacation response to the station.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.22`
wlanSuccessConnectTotal The field indicates the total sum of the successful connection .	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.23`
wlanAbnormalDisconnectTotal The filed indicates the total sum of the abnormal disconnect.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.24`
wlanNormalDisconnectTotal The filed indicates the total sum of the normal disconnect.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.4.1.25`

vapStatusTable

table

.1.3.6.1.4.1.4526.100.7.12.7.5 · 1 row entry · 13 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk vapStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::vapStatusTable'

List of virtual access point in a tabular form.

vapStatusEntry row .1.3.6.1.4.1.4526.100.7.12.7.5.1

An entry in the vapStatusTable.

Indexes

wlanIndex vapStatIndex

Column	Syntax	OID
vapStatIndex Specifies one of the 8 VAP profiles.	Integer32 Constraints: `range: 1-8`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.1`
txByteCount This attribute shall indicate transmitted bytes by the VAP .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.2`
txFrameCount This attribute shall indicate transmitted frames by the VAP .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.3`
rxByteCount This attribute shall indicate the recieved bytes by the VAP .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.4`
rxFrameCount This attribute shall indicate the recieved bytes by the VAP .	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.5`
txPayloadBytes the field indicates the sum of send bytes excluding from the ap.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.6`
rxPayloadBytes the field indicates the sum of received bytes excluding to the ap.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.7`
numberOfClients This attribute shall indicate number of clients associated with VAP .	Integer32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.8`
clientsAuthRequestTotal The field indicates the total sum of the authentiacation request from the station.	Integer32 Constraints: `range: 1-100`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.9`
clientsAuthResponseTotal The field indicates the total sum of the authentiacation response to the station.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.10`
clientsSuccessConnectTotal The field indicates the total sum of the successful connection .	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.11`
clientsAbnormalDisconnectTotal The filed indicates the total sum of the abnormal disconnect.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.12`
clientsNormalDisconnectTotal The filed indicates the total sum of the normal disconnect.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.5.1.13`

idsIpsStatusTable

table

.1.3.6.1.4.1.4526.100.7.12.7.6 · 1 row entry · 21 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk idsIpsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::idsIpsStatusTable'

List of virtual access point in a tabular form.

idsIpsStatusEntry row .1.3.6.1.4.1.4526.100.7.12.7.6.1

An entry in the idsIpsStatusTable.

Indexes

Column	Syntax	OID
authenticationFloodAttackCount the field indicates the authentication flood attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.1`
associationFloodAttackCount the field indicates the association flood attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.2`
unauthenticatedAssociationAttackCount the field indicates the unauthenticated association attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.3`
associationTableOverflowAttackCount the field indicates the association table overflow attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.4`
authenticationFailureAttackCount the field indicates the authentication failure attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.5`
deauthenticationBroadcastAttackCount the field indicates the deauthentication broadcast attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.6`
disassociationBroadcastAttackCount the field indicates the disassociation broadcast attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.7`
malformed802dot11PacketAttackCount the field indicates the malformed802dot11Packet attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.8`
eapolStartAttackCount the field indicates the EAPOL Start attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.9`
eapolLogOffAttackCount the field indicates the EAPOL LogOff attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.10`
prematureEAPFailureAttackCount the field indicates the premature EAPFailure attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.11`
prematureEAPSuccessAttackCount the field indicates the premature EAPSuccess attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.12`
ctsFloodAttackCount the field indicates the CTS flood attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.13`
rtsFloodAttackCount the field indicates the RTS flood attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.14`
rfJammingAttackCount the field indicates the rfJamming attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.15`
virtualCarrierAttackCount the field indicates the virtualCarrier attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.16`
macSpoofingAttackCount the field indicates the macSpoofing attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.17`
rogueApDetectionAttackCount the field indicates the rogueApDetection attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.18`
apPropertyChangedAttackCount the field indicates the apProperty changed attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.19`
deviceProbingAPAttackCount the field indicates the device probing AP attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.20`
psPollFloodAttackCount the field indicates the PS poll flood attack count.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.4526.100.7.12.7.6.1.21`

stationListTable

table

.1.3.6.1.4.1.4526.100.7.12.8.1 · 1 row entry · 23 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk stationListTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::stationListTable'

List of associated stations in a tabular form.

stationListEntry row .1.3.6.1.4.1.4526.100.7.12.8.1.1

An entry in the stationListTable.

Indexes

wlanIndex macAddress

Column Syntax OID

macAddress

This attribute shall indicate MAC address of the
associated stationID.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.4526.100.7.12.8.1.1.1

clientIpaddr

This attribute shall indicate IP address of the associated stationID.

SNMPv2-SMIIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.4526.100.7.12.8.1.1.2

associationTime

This attribute shall indicate ssid of the VAP to which the
station is associated.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.3

clientWirelessMode

This attribute shall indicate the wireless mode of the
associated stationID.

Enumeration

Enumerated Values:

0	dot11b
1	dot11bg
2	dot11ng
3	dot11a
4	dot11na

.1.3.6.1.4.1.4526.100.7.12.8.1.1.4

associatedSsid

This attribute shall indicate ssid of the VAP to which the
station is associated.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.5

associatedBssid

This attribute shall indicate bssid of the VAP to which the
station is associated.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.4526.100.7.12.8.1.1.6

associatedSNR

This attribute shall indicate the noise margin of Ap
with respect to the its recieved signal from station.

0.25dBmInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.7

clientChannelWidth

This attribute shall indicate the channel width for the
associated station in 11n mode. Not applicable for a station
in 11a/b/g mode.

Enumeration

Enumerated Values:

0	none
1	static20MHz
2	static40MHz

.1.3.6.1.4.1.4526.100.7.12.8.1.1.8

stationStatus

This attribute shall indicate the status of station.

Enumeration

Enumerated Values:

0	none
1	authenticating
2	authenticated
3	associating
4	associated

.1.3.6.1.4.1.4526.100.7.12.8.1.1.9

stationRssi

Receive Signal Strength Indicator. This attribute shall indicate
the strength of an incomming signal of station.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.10

idleTime

This attribute shall indicate the Idle time of station.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.11

stationChannel

This attribute shall indicate the channel number used.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.12

txDataRate

This attribute shall indicate the TX DataRate.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.13

rxDataRate

This attribute shall indicate the Rx DataRate.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.14

stationState

This attribute shall indicate the station State.

stationAuthenticationType

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.15

This attribute shall indicates how to authenticate the station.

Enumeration

Enumerated Values:

0	none
1	open
2	shared
3	legacy8021x
4	auto
5	wpa
6	wpa2

.1.3.6.1.4.1.4526.100.7.12.8.1.1.16

stationAID

This attribute shall indicate the association ID value assigned
by the AP to identify the association.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.17

stationTxSeq

This attribute shall indicate the Transmit Sequence of the station.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.18

stationRxSeq

This attribute shall indicate the Receive Sequence of the station.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.19

stationCapability

This attribute shall indicate the capability of station associated.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.20

stationCipher

This attribute shall indicate the Cipher of station associated.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.8.1.1.21

stationRecvPayloadBytes

This attribute shall indicate the count of the payload bytes received
from the wireless client.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.22

stationTransPayloadBytes

This attribute shall indicate the count of the payload bytes sent
to the wireless client.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.8.1.1.23

detectedApTable

table

.1.3.6.1.4.1.4526.100.7.12.15.1 · 1 row entry · 9 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk detectedApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::detectedApTable'

detectedAp Table shows list of detected neighbouring APs.

detectedApEntry row .1.3.6.1.4.1.4526.100.7.12.15.1.1

An entry in the detectedApTable.

Indexes

wlanIndex apMac

Column Syntax OID

apMac

This attribute shall indicate MAC address of the
detected AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.4526.100.7.12.15.1.1.1

apSsid

This attribute shall indicate ssid of the detected AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.1.1.2

apPrivacy

This attribute shall indicate whether privacy is enabled.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.100.7.12.15.1.1.3

apBand

This attribute shall indicate the operating band of detected AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.1.1.4

apChannel

This attribute shall indicate the channel number used.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.1.1.5

apRate

This attribute shall indicate the rate.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.1.1.6

apBeaconInterval

This attribute shall indicate the beacon interval in kus (1.024 ms).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.1.1.7

apNumBeacons

This attribute shall indicate the number of beacons received.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.1.1.8

apLastBeacon

This attribute shall indicate the time of the last beacon.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.1.1.9

knownApTable

table

.1.3.6.1.4.1.4526.100.7.12.15.2 · 1 row entry · 10 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk knownApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::knownApTable'

knownAp Table shows list of known APs.

knownApEntry row .1.3.6.1.4.1.4526.100.7.12.15.2.1

An entry in the knownApTable.

Indexes

wlanIndex knownApMac

Column Syntax OID

knownApMac

This attribute shall indicate MAC address of the
known AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.4526.100.7.12.15.2.1.1

knownApSsid

This attribute shall indicate ssid of the known AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.2.1.2

knownApPrivacy

This attribute shall indicate whether privacy is enabled.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.100.7.12.15.2.1.3

knownApBand

This attribute shall indicate the operating band of known AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.2.1.4

knownApChannel

This attribute shall indicate the channel number used.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.2.1.5

knownApRate

This attribute shall indicate the rate.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.2.1.6

knownApBeaconInterval

This attribute shall indicate the beacon interval in kus (1.024 ms).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.2.1.7

knownApNumBeacons

This attribute shall indicate the number of beacons received.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.2.1.8

knownApLastBeacon

This attribute shall indicate the time of the last beacon.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.2.1.9

knownApEntryStatus

The Known AP Entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.4526.100.7.12.15.2.1.10

unknownApTable

table

.1.3.6.1.4.1.4526.100.7.12.15.3 · 1 row entry · 9 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk unknownApTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::unknownApTable'

unknownAp Table shows list of unknown APs.

unknownApEntry row .1.3.6.1.4.1.4526.100.7.12.15.3.1

An entry in the unknownApTable.

Indexes

wlanIndex unknownApMac

Column Syntax OID

unknownApMac

This attribute shall indicate MAC address of the
unknown AP.

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.4526.100.7.12.15.3.1.1

unknownApSsid

This attribute shall indicate ssid of the unknown AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.3.1.2

unknownApPrivacy

This attribute shall indicate whether privacy is enabled.

SNMPv2-TCTruthValue

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.4526.100.7.12.15.3.1.3

unknownApBand

This attribute shall indicate the operating band of unknown AP.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.3.1.4

unknownApChannel

This attribute shall indicate the channel number used.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.3.1.5

unknownApRate

This attribute shall indicate the rate.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.3.1.6

unknownApBeaconInterval

This attribute shall indicate the beacon interval in kus (1.024 ms).

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.3.1.7

unknownApNumBeacons

This attribute shall indicate the number of beacons received.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.4526.100.7.12.15.3.1.8

unknownApLastBeacon

This attribute shall indicate the time of the last beacon.

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.4526.100.7.12.15.3.1.9

wlanAccessControlLocalTable

table

.1.3.6.1.4.1.4526.100.7.12.16.1 · 1 row entry · 2 columns

Open in standard view

Uses the netgear variant from /opt/observium/mibs/netgear.

Command help

Walk wlanAccessControlLocalTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WNDAP620' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WNDAP620::wlanAccessControlLocalTable'

ACL attributes in tablular form to allow for multiple
instances on an agent.

wlanAccessControlLocalEntry row .1.3.6.1.4.1.4526.100.7.12.16.1.1

An entry in the wlanAccessControlLocalTable.

Indexes

wlanIndex aclMAC

Column Syntax OID

aclMAC

This field should indicate an MAC address entry in the
access control local database.