WN203 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
167

wlanSettingTable

table
.1.3.6.1.4.1.4526.100.7.16.2.1 · 1 row entry · 23 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wlanSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wlanSettingTable' 
wireless interface settings table.
wlanSettingEntry row .1.3.6.1.4.1.4526.100.7.16.2.1.1
An entry in the wlanSettingTable. Each wlanSettingEntry represents
a wireless profile (2.4GHz band or 5GHz band). On a single radio
device, the same wireless interface can be assigned 2.4GHz profile
or 5GHz profile. On…
Indexes
Column Syntax OID
wlanIndex
Specifies one of the 2 wireless profiles.
Enumeration
Enumerated Values:
24band2dot4GHz
50band5GHz
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.1
operateMode
This attribute shall indicate the desired wireless operating mode.
The option are:
dot11b - All 802.11b wireless stations can be used.
802.11g wireless stations can still be used
if they can operate in 802.11b mode.…
Enumerationr/w
Enumerated Values:
0dot11b
1dot11bg
2dot11ng
3dot11a
4dot11na
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.2
radioStatus
This attribute shall indicate the status of radio.
The default value is enable(1).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.3
channel
This attribute shall indicate the channel number to be
used. The default value is auto(0).
Enumerationr/w
Enumerated Values:
0auto
1ch1
2ch2
3ch3
4ch4
5ch5
6ch6
7ch7
8ch8
9ch9
10ch10
11ch11
12ch12
13ch13
14ch14
34ch34
36ch36
38ch38
40ch40
42ch42
44ch44
46ch46
48ch48
52ch52
56ch56
60ch60
64ch64
100ch100
104ch104
108ch108
112ch112
116ch116
120ch120
124ch124
128ch128
132ch132
136ch136
140ch140
149ch149
153ch153
157ch157
161ch161
165ch165
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.4
dataRate
This attribute shall indicate the transmit rate applicable to
802.11b, 802.11bg and 802.11a modes. When the operateMode is:

dot11b(0) - can set to 0:best, 2:1Mb/s, 4:2Mb/s,
11:5.5Mb/s, and 22:11 Mb/s.
…
Enumerationr/w
Enumerated Values:
0best
2rate1Mbps
4rate2Mbps
11rate5dot5Mbps
12rate6Mbps
18rate9Mbps
22rate11Mbps
24rate12Mbps
36rate18Mbps
48rate24Mbps
72rate36Mbps
96rate48Mbps
108rate54Mbps
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.5
wmmSupport
This field indicates the status of WMM(Wireless Multimedia) suport.
The default value is enable(1).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.6
beaconInterval
This attribute shall indicate the Beacon Interval.
The default value is 100.
Enumerationr/w
Enumerated Values:
100beacon-100
250beacon-250
500beacon-500
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.7
rtsThreshold
This attribute shall indicate the RTS threshold.
The default value is 2347.
Integer32r/w
Constraints:
range: 0-2347
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.8
fragLength
This attribute shall indicate the fragmentation threshold.
The default value is 2346.
Integer32r/w
Constraints:
range: 256-2346
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.9
dtimInterval
This attribute shall indicate the beacon delivery traffic
indication message period in multiples of beaconInterval.
The default value is 3.
Integer32r/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.10
preambleType
This attribute shall indicate the preamble setting.
This setting is only applicable to 802.11b, 802.11bg
and 802.11ng modes. When set to auto(0), depending on
the station type, AP selects short or long preamble.
The de…
Enumerationr/w
Enumerated Values:
0auto
1long
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.11
txPower
This attribute shall indicate the transmit power.
The default value is full(0).
Enumerationr/w
Enumerated Values:
0full
1half
2quarter
3eighth
4min
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.12
accessControlMode
The field indicates whether the access control list is
enabled and the source of the database of the access
control list.
Enumerationr/w
Enumerated Values:
0disable
1local
2server
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.13
rogueApDetection
This attribute shall indicate the status of Rogue AP detection.
The default value is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.14
mcsRate
This attribute shall indicate the transmit rate to be used
in case of 11na and 11ng modes. Rate index of 0 means 15 Mbps
when the channel width is 40Mhz or dynamic-20/40 and 7.2 Mbps
when the channel width is 20Mhz. E…
Enumerationr/w
Enumerated Values:
0mcs0
1mcs1
2mcs2
3mcs3
4mcs4
5mcs5
6mcs6
7mcs7
8mcs8
9mcs9
10mcs10
11mcs11
12mcs12
13mcs13
14mcs14
15mcs15
99best
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.15
guardInterval
This attribute shall indicate the guard interval. When set to auto(0),
depending on the station type, AP selects 400ns or 800ns guard interval.
The default value is auto(0).
Enumerationr/w
Enumerated Values:
0auto
800long
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.16
channelWidth
This attribute shall set the CWM mode to 20Mhz or 40Mhz
or automatically switches between 20 and 40 based on
channel conditions.
For 11ng mode, the default value is static20Mhz(0), when the channel is auto.
For 11na m…
Enumerationr/w
Enumerated Values:
0static20Mhz
1static40Mhz
2dynamic20-40
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.17
ampdu
This attribute shall enable or disable AMPDU aggregation.
It is enabled by default.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.18
ampduAggrLength
This attribute shall set the AMPDU aggregation length.
The default value is 65535.
Integer32r/w
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.19
rifsTransmission
This attribute sets the status of rifsTransmission.
The default value of the attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.20
apMode
Specifies the device operation mode.
ap: device operates as an Access Point
p2mp-ap: device operates as a point-to-multipoint wireless bridge
Wireless STA can be associated to the device in this mode
p2mp: device o…
Enumerationr/w
Enumerated Values:
0ap
1p2p
2p2p-ap
3p2mp-ap
4p2mp
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.21
uapsdStatus
This attribute shall indicate whether wmm power save.
The default value is enable(1) .
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.22
maxClientAssociations
This attribute shall indicates the max wireless clients that allowed to
associated.When the value is set 0,and the wireless clients are not limited
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4526.100.7.16.2.1.1.23

vapSettingTable

table
.1.3.6.1.4.1.4526.100.7.16.3.1 · 1 row entry · 20 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vapSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::vapSettingTable' 
VAP attributes setting table.
vapSettingEntry row .1.3.6.1.4.1.4526.100.7.16.3.1.1
VAP attributes setting table entry.
Indexes
Column Syntax OID
vapIndex
Specifies one of the 8 VAP profiles.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.1
vapProfileName
Name of this VAP profile.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.2
vapProfileStatus
This attribute shall indicate the status of this VAP profile.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.3
ssid
This attribute shall indicate SSID.Its length can't be larger than 32 .
OctetStringr/w
Constraints:
range: 2-32
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.4
hideNetworkName
This attribute shall indicate whether to broadcast wireless
network Name (SSID).
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.5
dynamicVlan
The field indicates the vlan Type
disable(0) : when disable vlan type is static.
optional(1) : dynamic vlan is enabled but if radius server do not return vlanId still allow station to connect.
required(2) : dynamic vla…
Enumerationr/w
Enumerated Values:
0disable
1optional
2required
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.6
vlanID
This attribute shall indicate the VLAN ID of the VAP.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.7
accessControl
This attribute shall indicate the policy to define whether to connect the STA to default
configured VLAN or just send disconnect to the STA if the vlan id returned from the
Radius server does not match with the one st…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.8
accessControlPolicy
This attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.9
clientSecuritySeparation
This attribute shall indicate whether wireless clients in a BSS
can communicate with each other.
The default value of this attribute is disable(0).
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.10
authenticationType
The field indicates how to authenticate the station.
Enumerationr/w
Enumerated Values:
0open
1shared
2legacy802dot1x
4wpa
8wpa2
12wpaORwpa2
16wpapsk
32wpa2psk
48wpapskORwpa2psk
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.11
encryption
The field indicates how to encrypt the packets sent to a station.
Enumerationr/w
Enumerated Values:
0none
1wep
2tkip
4aes
6tkipORaes
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.12
presharedKey
This attribute shall indicate preshared key used in the following
authenticationtype:
wpapsk(16),
wpa2psk(32),
wpapskORwpa2psk(48).
Remarks:
8 to 63 characters or 64 hex characters.
OctetStringr/w
Constraints:
range: 8-64
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.13
wepKeyType
The field shall indicate the type of WEP key.
Enumerationr/w
Enumerated Values:
64hex64
128hex128
152hex152
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.14
wepKeyNo
The field indicates the number of default wep key.
Enumerationr/w
Enumerated Values:
1wepKey1
2wepKey2
3wepKey3
4wepKey4
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.15
wepKey1
The field indicates the key value of the first default wep key.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.16
wepKey2deprecated
The field indicates the key value of the second default wep key.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.17
wepKey3deprecated
The field indicates the key value of the third default wep key.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.18
wepKey4deprecated
The field indicates the key value of the fourth default wep key.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.19
wepPassPhrase
This attribute shall indicate WEP pass phrase, used to
generate four WEP keys.
OctetStringr/w
Constraints:
range: 1-39
 .1.3.6.1.4.1.4526.100.7.16.3.1.1.20

wdsSettingTable

table
.1.3.6.1.4.1.4526.100.7.16.4.1 · 1 row entry · 10 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wdsSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wdsSettingTable' 
WDS attributes in tablular form to allow for multiple
instances of wds setting profile.
wdsSettingEntry row .1.3.6.1.4.1.4526.100.7.16.4.1.1
An entry in the wdsTable.
Indexes
Column Syntax OID
wdsIndex
Specifies one of the 4 wireless bridge profiles.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.1
wdsProfileName
Name of the wireless bridge profile.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.2
wdsProfileStatus
This attribute shall indicate the status of this wireless
bridge profile.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.3
remoteMacAddress
This attribute shall indicate the link partner's MAC address.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.4
wdsAuthenticationtype
The field indicates how to authenticate the link partner.
Enumerationr/w
Enumerated Values:
0open
2wpapsk
4wpa2psk
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.5
wdsEncryption
The field indicates how to encrypt the packets sent to link partner.
Enumerationr/w
Enumerated Values:
0none
1wep
2tkip
4aes
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.6
wdsPresharedKey
This attribute shall indicate preshared key used by wpapsk or wpa2psk.
OctetStringr/w
Constraints:
range: 8-63
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.7
wdsWepKeyType
The field shall indicate the type of WEP key.
Enumerationr/w
Enumerated Values:
64hex64
128hex128
152hex152
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.8
wdsWepKey
The field indicates the value of the WEP key.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.9
wdsWepPassPhrase
This attribute shall indicate WEP pass phrase, used to
generate the WEP key.
OctetStringr/w
Constraints:
range: 1-39
 .1.3.6.1.4.1.4526.100.7.16.4.1.1.10

wmmApEdcaSettingTable

table
.1.3.6.1.4.1.4526.100.7.16.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wmmApEdcaSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wmmApEdcaSettingTable' 
WMM settings for AP EDCA.
wmmApEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.16.5.1.1
AP Enhanced Distribution Channel Access Parameters
Indexes
Column Syntax OID
wmmApEdcaQIndex
Specifies one of the 4 AP EDCA queues.
1: AC_BE
2: AC_BK
3: AC_VI
4: AC_VO
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.1
wmmApEdcaQName
Queues are defined for different types of data
(video or voice or data) transmitted from AP to station.
AC_BE (best effort) IP data is sent to this queue.
AC_BK (Background) Bulk data that requires maximum throughput a…
OctetString
Constraints:
range: 5-5
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.2
wmmApEdcaAifs
The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time
(in microseconds) for data frames.
0: 0us
1: 32us
2: 64us
3: 96us
4: 128us
5: 160us
6: 192us
7: 224us
8: 255us
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.3
wmmApEdcaCwMin
This parameter is input to the algorithm that determines
the initial random backoff wait time ('window') for retry of a
transmission. The value specified here in the Minimum Contention
Window is the upper limit (in m…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.4
wmmApEdcaCwMax
The value specified here in the Maximum Contention Window
is the upper limit (in microseconds) for the doubling of the
random backoff value. This doubling continues until either the data
frame is sent or the Maximum …
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.5
wmmApEdcaMaxBurst
This value specifies (in microseconds) the Maximum
Burst Length allowed for packet bursts on the wireless
network. A packet burst is a collection of multiple
frames transmitted without header information. The decreas…
Integer32r/w
Constraints:
range: 0-8192
 .1.3.6.1.4.1.4526.100.7.16.5.1.1.6

wmmStaEdcaSettingTable

table
.1.3.6.1.4.1.4526.100.7.16.5.2 · 1 row entry · 6 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wmmStaEdcaSettingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wmmStaEdcaSettingTable' 
WMM settings for STA EDCA.
wmmStaEdcaSettingEntry row .1.3.6.1.4.1.4526.100.7.16.5.2.1
Station Enhanced Distributed Channel Access (EDCA)
Parameters affect traffic flowing from the client station
to the access point
Indexes
Column Syntax OID
wmmStaEdcaQIndex
Specifies one of the 4 STA EDCA Queues.
1: AC_BE
2: AC_BK
3: AC_VI
4: AC_VO
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.1
wmmStaEdcaQName
Queues are defined for different types of data
(video or voice or data) transmitted from station-to-AP.
AC_BE (best effort) IP data is sent to this queue.
AC_BK (Background) Bulk data that requires maximum throughput a…
OctetString
Constraints:
range: 5-5
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.2
wmmStaEdcaAifs
The Arbitration Inter-Frame Spacing (AIFS) specifies the wait time
(in microseconds) for data frames.
0: 0us
1: 32us
2: 64us
3: 96us
4: 128us
5: 160us
6: 192us
7: 224us
8: 255us
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.3
wmmStaEdcaCwMin
This parameter is input to the algorithm that determines the
initial random backoff wait time ('window') for retry of a transmission.
The value specified here in the Minimum Contention Window is the
upper limit (in mi…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.4
wmmStaEdcaCwMax
The value specified here in the Maximum Contention Window is the
upper limit (in microseconds) for the doubling of the random
backoff value. This doubling continues until either the data frame
is sent or the Maximum C…
Integer32r/w
Constraints:
range: 0-1
range: 3-3
range: 7-7
range: 15-15
range: 31-31
range: 63-63
range: 127-127
range: 255-255
range: 511-511
range: 1023-1023
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.5
wmmStaEdcaTxopLimit
The Transmission Opportunity (TXOP) is an interval of time
when a WMM client station has the right to initiate transmissions
onto the wireless medium (WM). This value specifies (in microseconds)
the Transmission Oppor…
Integer32r/w
Constraints:
range: 0-8192
 .1.3.6.1.4.1.4526.100.7.16.5.2.1.6

wirelessStatTable

table
.1.3.6.1.4.1.4526.100.7.16.7.2 · 1 row entry · 11 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wirelessStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wirelessStatTable' 
Wireless interface statistics table.
wirelessStatEntry row .1.3.6.1.4.1.4526.100.7.16.7.2.1
Wireless interface statistics.
Indexes
Column Syntax OID
wlanRecvUnicastPacket
the field indicates the sum of received unicast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.1
wlanTransUnicastPacket
the field indicates the sum of transmitted unicast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.2
wlanRecvBroadcastPacket
the field indicates the sum of received broadcast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.3
wlanTransBroadcastPacket
the field indicates the sum of transmitted broadcast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.4
wlanRecvMulticastPacket
the field indicates the sum of received multicast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.5
wlanTransMulticastPacket
the field indicates the sum of transmitted multicast packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.6
wlanRecvPacket
the field indicates the sum of received packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.7
wlanTransPacket
the field indicates the sum of transmitted packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.8
wlanRecvBytes
the field indicates the sum of received bytes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.9
wlanTransBytes
the field indicates the sum of transmitted bytes.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.10
wlanWrongSTAPackets
the field indicates the sum of wlan wrong station packets.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.2.1.11

radioStatusTable

table
.1.3.6.1.4.1.4526.100.7.16.7.4 · 1 row entry · 25 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk radioStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::radioStatusTable' 
List of virtual access point in a tabular form.
radioStatusEntry row .1.3.6.1.4.1.4526.100.7.16.7.4.1
An entry in the radioStatusTable.
Indexes
Column Syntax OID
numberOfStations
This field indicates number of stations associated with wlan .
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.1
wlanRxPacketsTotal
The field indicates the total sum of the packets received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.2
wlanRxBytesTotal
The field indicates the total sum of the bytes received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.3
wlanTxPacketsTotal
The field indicates the total sum of the packets sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.4
wlanTxBytesTotal
The field indicates the total sum of the bytes sent.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.5
wlanDiscardPacketsTotal
The field indicates the total sum of the packets discard.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.6
wlanTxPacketFailTotal
The field indicates the total sum of the packets which failed to send.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.7
wlanTxRetryTotal
The field indicates the total sum of the packets which retry to send.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.8
wlanFcsFailCntTotal
The field indicates the total sum of the packets receved which FCS is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.9
wlanRtsFailCntTotal
The field indicates the total sum of the packets receved which RTS is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.10
wlanAckFailCntTotal
The field indicates the total sum of the packets receved which ACK is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.11
wlanCrcErrorTotal
The field indicates the total sum of the packets receved which CRC is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.12
wlanPhyErrorTotal
The field indicates the total sum of the packets receved which PHY is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.13
wlanMicErrorTotal
The field indicates the total sum of the packets receved which MIC is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.14
wlanKeyErrorTotal
The field indicates the total sum of the packets receved which KEY is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.15
wlanTxFifoErrorTotal
The field indicates the total sum of the packets transmit which FIFO is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.16
wlanRxFifoErrorTotal
The field indicates the total sum of the packets recieved which FIFO is error.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.17
wlanTxPayloadBytesTotal
The field indicates the total sum of the wlan packets sent excluding from the ap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.18
wlanRxPayloadBytesTotal
The field indicates the total sum of the wlan packets received excluding to the ap.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.19
wlanPacketErrorRateTotal
The field indicates the total sum of the received error wlan packets rate.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.20
wlanAuthRequestTotal
The field indicates the total sum of the authentiacation request from the station.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.21
wlanAuthResponseTotal
The field indicates the total sum of the authentiacation response to the station.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.22
wlanSuccessConnectTotal
The field indicates the total sum of the successful connection .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.23
wlanAbnormalDisconnectTotal
The filed indicates the total sum of the abnormal disconnect.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.24
wlanNormalDisconnectTotal
The filed indicates the total sum of the normal disconnect.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.4.1.25

vapStatusTable

table
.1.3.6.1.4.1.4526.100.7.16.7.5 · 1 row entry · 13 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk vapStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::vapStatusTable' 
List of virtual access point in a tabular form.
vapStatusEntry row .1.3.6.1.4.1.4526.100.7.16.7.5.1
An entry in the vapStatusTable.
Indexes
Column Syntax OID
vapStatIndex
Specifies one of the 8 VAP profiles.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.1
txByteCount
This attribute shall indicate transmitted bytes by the VAP .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.2
txFrameCount
This attribute shall indicate transmitted frames by the VAP .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.3
rxByteCount
This attribute shall indicate the recieved bytes by the VAP .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.4
rxFrameCount
This attribute shall indicate the recieved bytes by the VAP .
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.5
txPayloadBytes
the field indicates the sum of send bytes excluding from the ap.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.6
rxPayloadBytes
the field indicates the sum of received bytes excluding to the ap.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.7
numberOfClients
This attribute shall indicate number of clients associated with VAP .
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.8
clientsAuthRequestTotal
The field indicates the total sum of the authentiacation request from the station.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.9
clientsAuthResponseTotal
The field indicates the total sum of the authentiacation response to the station.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.10
clientsSuccessConnectTotal
The field indicates the total sum of the successful connection .
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.11
clientsAbnormalDisconnectTotal
The filed indicates the total sum of the abnormal disconnect.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.12
clientsNormalDisconnectTotal
The filed indicates the total sum of the normal disconnect.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4526.100.7.16.7.5.1.13

stationListTable

table
.1.3.6.1.4.1.4526.100.7.16.8.1 · 1 row entry · 23 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk stationListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::stationListTable' 
List of associated stations in a tabular form.
stationListEntry row .1.3.6.1.4.1.4526.100.7.16.8.1.1
An entry in the stationListTable.
Indexes
Column Syntax OID
macAddress
This attribute shall indicate MAC address of the
associated stationID.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.1
clientIpaddr
This attribute shall indicate IP address of the associated stationID.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.2
associationTime
This attribute shall indicate ssid of the VAP to which the
station is associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.3
clientWirelessMode
This attribute shall indicate the wireless mode of the
associated stationID.
Enumeration
Enumerated Values:
0dot11b
1dot11bg
2dot11ng
3dot11a
4dot11na
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.4
associatedSsid
This attribute shall indicate ssid of the VAP to which the
station is associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.5
associatedBssid
This attribute shall indicate bssid of the VAP to which the
station is associated.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.6
associatedSNR
This attribute shall indicate the noise margin of Ap
with respect to the its recieved signal from station.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.7
clientChannelWidth
This attribute shall indicate the channel width for the
associated station in 11n mode. Not applicable for a station
in 11a/b/g mode.
Enumeration
Enumerated Values:
0none
1static20MHz
2static40MHz
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.8
stationStatus
This attribute shall indicate the status of station.
Enumeration
Enumerated Values:
0none
1authenticating
2authenticated
3associating
4associated
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.9
stationRssi
Receive Signal Strength Indicator. This attribute shall indicate
the strength of an incomming signal of station.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.10
idleTime
This attribute shall indicate the Idle time of station.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.11
stationChannel
This attribute shall indicate the channel number used.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.12
txDataRate
This attribute shall indicate the TX DataRate.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.13
rxDataRate
This attribute shall indicate the Rx DataRate.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.14
stationState
This attribute shall indicate the station State.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.15
stationAuthenticationType
This attribute shall indicates how to authenticate the station.
Enumeration
Enumerated Values:
0none
1open
2shared
3legacy8021x
4auto
5wpa
6wpa2
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.16
stationAID
This attribute shall indicate the association ID value assigned
by the AP to identify the association.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.17
stationTxSeq
This attribute shall indicate the Transmit Sequence of the station.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.18
stationRxSeq
This attribute shall indicate the Receive Sequence of the station.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.19
stationCapability
This attribute shall indicate the capability of station associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.20
stationCipher
This attribute shall indicate the Cipher of station associated.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.21
stationRecvPayloadBytes
This attribute shall indicate the count of the payload bytes received
from the wireless client.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.22
stationTransPayloadBytes
This attribute shall indicate the count of the payload bytes sent
to the wireless client.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.8.1.1.23

detectedApTable

table
.1.3.6.1.4.1.4526.100.7.16.15.1 · 1 row entry · 9 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk detectedApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::detectedApTable' 
detectedAp Table shows list of detected neighbouring APs.
detectedApEntry row .1.3.6.1.4.1.4526.100.7.16.15.1.1
An entry in the detectedApTable.
Indexes
Column Syntax OID
apMac
This attribute shall indicate MAC address of the
detected AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.1
apSsid
This attribute shall indicate ssid of the detected AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.2
apPrivacy
This attribute shall indicate whether privacy is enabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.3
apBand
This attribute shall indicate the operating band of detected AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.4
apChannel
This attribute shall indicate the channel number used.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.5
apRate
This attribute shall indicate the rate.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.6
apBeaconInterval
This attribute shall indicate the beacon interval in kus (1.024 ms).
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.7
apNumBeacons
This attribute shall indicate the number of beacons received.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.8
apLastBeacon
This attribute shall indicate the time of the last beacon.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.1.1.9

knownApTable

table
.1.3.6.1.4.1.4526.100.7.16.15.2 · 1 row entry · 10 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk knownApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::knownApTable' 
knownAp Table shows list of known APs.
knownApEntry row .1.3.6.1.4.1.4526.100.7.16.15.2.1
An entry in the knownApTable.
Indexes
Column Syntax OID
knownApMac
This attribute shall indicate MAC address of the
known AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.1
knownApSsid
This attribute shall indicate ssid of the known AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.2
knownApPrivacy
This attribute shall indicate whether privacy is enabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.3
knownApBand
This attribute shall indicate the operating band of known AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.4
knownApChannel
This attribute shall indicate the channel number used.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.5
knownApRate
This attribute shall indicate the rate.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.6
knownApBeaconInterval
This attribute shall indicate the beacon interval in kus (1.024 ms).
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.7
knownApNumBeacons
This attribute shall indicate the number of beacons received.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.8
knownApLastBeacon
This attribute shall indicate the time of the last beacon.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.9
knownApEntryStatus
The Known AP Entry status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.100.7.16.15.2.1.10

unknownApTable

table
.1.3.6.1.4.1.4526.100.7.16.15.3 · 1 row entry · 9 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk unknownApTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::unknownApTable' 
unknownAp Table shows list of unknown APs.
unknownApEntry row .1.3.6.1.4.1.4526.100.7.16.15.3.1
An entry in the unknownApTable.
Indexes
Column Syntax OID
unknownApMac
This attribute shall indicate MAC address of the
unknown AP.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.1
unknownApSsid
This attribute shall indicate ssid of the unknown AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.2
unknownApPrivacy
This attribute shall indicate whether privacy is enabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.3
unknownApBand
This attribute shall indicate the operating band of unknown AP.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.4
unknownApChannel
This attribute shall indicate the channel number used.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.5
unknownApRate
This attribute shall indicate the rate.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.6
unknownApBeaconInterval
This attribute shall indicate the beacon interval in kus (1.024 ms).
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.7
unknownApNumBeacons
This attribute shall indicate the number of beacons received.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.8
unknownApLastBeacon
This attribute shall indicate the time of the last beacon.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.7.16.15.3.1.9

wlanAccessControlLocalTable

table
.1.3.6.1.4.1.4526.100.7.16.16.1 · 1 row entry · 2 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wlanAccessControlLocalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WN203' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WN203::wlanAccessControlLocalTable' 
ACL attributes in tablular form to allow for multiple
instances on an agent.
wlanAccessControlLocalEntry row .1.3.6.1.4.1.4526.100.7.16.16.1.1
An entry in the wlanAccessControlLocalTable.
Indexes
Column Syntax OID
aclMAC
This field should indicate an MAC address entry in the
access control local database.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.7.16.16.1.1.1
aclMacStatus
The ACL Mac status.

Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.100.7.16.16.1.1.2