WLSX-SWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
12
Rows
12
Columns
108

wlsxSwitchListTable

table
.1.3.6.1.4.1.14823.2.2.1.1.1.6 · 1 row entry · 2 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchListTable' 
This Table will list all the switches in the Switch Domain.
It will be populated only on the conductor switch. Local switches
return empty table.
wlsxSwitchListEntry row .1.3.6.1.4.1.14823.2.2.1.1.1.6.1
Switch List Entry
Indexes
Column Syntax OID
switchListSwitchIPAddress
IP Address of the switch.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1
switchListSwitchRole
Role of the Switch.
Enumeration
Enumerated Values:
1conductor
2local
3standbyconductor
4branch
5md
 .1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2

wlsxSwitchLicenseTable

table
.1.3.6.1.4.1.14823.2.2.1.1.1.8 · 1 row entry · 6 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchLicenseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchLicenseTable' 
This table lists all licenses installed on the switch.
wlsxLicenseEntry row .1.3.6.1.4.1.14823.2.2.1.1.1.8.1
License Entry
Indexes
Column Syntax OID
licenseIndex
License ID number
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1
licenseKey
License Key
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2
licenseInstalled
License installation time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3
licenseExpires
License expiry time
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4
licenseFlags
License flags; E - enabled; A - auto-generated;
R - reboot required to activate
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5
licenseService
The service enabled by this license.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6

wlsxSysXProcessorTable

table
.1.3.6.1.4.1.14823.2.2.1.1.1.9 · 1 row entry · 3 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSysXProcessorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSysXProcessorTable' 
The table of processors contained by the switch.
wlsxSysXProcessorEntry row .1.3.6.1.4.1.14823.2.2.1.1.1.9.1
An entry for one processor contained by the switch.
Indexes
Column Syntax OID
sysXProcessorID
Processor Index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1
sysXProcessorDescr
description of the processor.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2
sysXProcessorLoad
The average, over the last minute, of the percentage of
time that this processor was not idle.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3

wlsxSysXStorageTable

table
.1.3.6.1.4.1.14823.2.2.1.1.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSysXStorageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSysXStorageTable' 
The table of Storage-devices contained by the switch.
wlsxSysXStorageEntry row .1.3.6.1.4.1.14823.2.2.1.1.1.10.1
An entry for one long-term storage device contained by the
switch.
Indexes
Column Syntax OID
sysXStorageIndex
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1
sysXStorageType
 Enumeration
Enumerated Values:
1ram
2flashMemory
 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2
sysXStorageSize
size of the storage filesystem in MB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3
sysXStorageUsed
size of the storage filesystem in MB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4
sysXStorageName
name of the storage filesystem.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5

wlsxSysXMemoryTable

table
.1.3.6.1.4.1.14823.2.2.1.1.1.11 · 1 row entry · 4 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSysXMemoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSysXMemoryTable' 
The memory status of the switch
wlsxSysXMemoryEntry row .1.3.6.1.4.1.14823.2.2.1.1.1.11.1
An entry for one memory region on the switch. Currently,
only the CP region is monitored.
Indexes
Column Syntax OID
sysXMemoryIndex
 SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1
sysXMemorySize
Total memory in KB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2
sysXMemoryUsed
Used memory in KB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3
sysXMemoryFree
Free memory in KB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4

wlsxSwitchUserTable

table
.1.3.6.1.4.1.14823.2.2.1.1.2.1 · 1 row entry · 14 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchUserTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchUserTable' 
This Table lists all the users (both wired and wireless) currently
connected to the switch. Users are identified by their IP address.
wlsxSwitchUserEntry row .1.3.6.1.4.1.14823.2.2.1.1.2.1.1
User Entry
Indexes
Column Syntax OID
userIpAddress
IP Address from which the user connected to the switch.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1
userPhyAddress
Physical Address of the station from which the user connected to
the switch.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2
userName
Name of the User.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3
userRole
The Role configured for this user.
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4
userUpTime
Time since the user is connected to the switch.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5
userAuthenticationMethod
Authentication mechanism used by the user to connect to the switch.
Enumeration
Enumerated Values:
1none
2other
3web
4dot1x
5vpn
6mac
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6
userLocation
Location of the access point (in Building.Floor.... format), which
the user used to connect to the switch.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7
userServerName
Name of the Back-end authentication server, used to authenticate
the user.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8
userConnectedVlan
Vlan on which the user is connected to the switch.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9
userConnectedSlot
Slot on switch, where the user connection terminates.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10
userConnectedPort
Port on switch, where the user connection terminates.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11
userBWContractName
Name of the Bandwidth Contract applied to this user.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12
userBWContractUsage
Indicates how the Bandwidth Contract is used.
Enumeration
Enumerated Values:
1user
2shared
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13
userConnectedModule
The module to which the user is connected, if wired.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14

wlsxSwitchStationMgmtTable

table
.1.3.6.1.4.1.14823.2.2.1.1.2.2 · 1 row entry · 9 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchStationMgmtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchStationMgmtTable' 
This Table lists all the wireless stations associated with the 
Access points connected to this switch.
wlsxSwitchStationMgmtEntry row .1.3.6.1.4.1.14823.2.2.1.1.2.2.1
Station Management Entry
Indexes
Column Syntax OID
staPhyAddress
The Physical Address of the Station.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1
staAccessPointBSSID
BSSID of the Access point through which the station is connected
to the switch
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2
staUserName
Name of the User connecting from this station.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3
staUserRole
User Role.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4
staAssociationID
AID with which the Station is associated with this system.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5
staAccessPointESSID
ESSID of the Access point
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6
staSignalToNoiseRatio
SNR for the BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7
staTransmitRate
Indicates Transmit rate of the channel
Enumeration
Enumerated Values:
1rate1Mbps
2rate2Mbps
3rate5point5Mbps
4rate6Mbps
5rate9Mbps
6rate11Mbps
7rate12Mbps
8rate18Mbps
9rate24Mbps
10rate36Mbps
11rate48Mbps
12rate54Mbps
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8
staReceiveRate
Indicates Receive rate of the channel
Enumeration
Enumerated Values:
1rate1Mbps
2rate2Mbps
3rate5point5Mbps
4rate6Mbps
5rate9Mbps
6rate11Mbps
7rate12Mbps
8rate18Mbps
9rate24Mbps
10rate36Mbps
11rate48Mbps
12rate54Mbps
 .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9

wlsxSwitchStationStatsTable

table
.1.3.6.1.4.1.14823.2.2.1.1.2.3 · 1 row entry · 10 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchStationStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchStationStatsTable' 
This Table lists the statistics of all the wireless stations 
associated with the Access points connected to this switch.
wlsxSwitchStationStatsEntry row .1.3.6.1.4.1.14823.2.2.1.1.2.3.1
Station Statistics Entry
Indexes
Column Syntax OID
staTxPackets
Total Packets Transmitted by the station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1
staTxBytes
Total Bytes Transmitted by the station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2
staRxPackets
Total Packets Received by the Station
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3
staRxBytes
Total Bytes Received by the station.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4
staBwRate
Bandwidth Rate in Kbps of the station.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5
staFrameRetryRate
Station Frame Retry Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6
staFrameLowSpeedRate
Station Frame Low Speed Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7
staFrameNonUnicastRate
Station Frame Non Unicast Packet Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8
staFrameFragmentationRate
Station Frame Fragmentation Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9
staFrameReceiveErrorRate
Station Frame Receive Error Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10

wlsxSwitchAccessPointTable

table
.1.3.6.1.4.1.14823.2.2.1.1.3.3 · 1 row entry · 19 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchAccessPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchAccessPointTable' 
This Table lists all the Access Points Connected to this switch.
wlsxSwitchAccessPointEntry row .1.3.6.1.4.1.14823.2.2.1.1.3.3.1
Station Management Entry
Indexes
Column Syntax OID
apBSSID
The Physical Address of the Access Point.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1
apESSID
ESSID of the Access Point
SNMPv2-TCDisplayString
Constraints:
range: 0-64
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2
apSlot
Slot to which the Access Point is connected.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3
apPort
Port to which the Access Point is connected.
Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4
apIpAddress
Address of the Access Point.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5
apPhyType
Physical Layer Protocol support of the AP.
Enumeration
Enumerated Values:
1dot11a
2dot11b
3dot11g
4dot11ax6ghz
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6
apType
Indicates whether the Access point is an Air Monitor or regular AP.
Enumeration
Enumerated Values:
1ap
2am
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7
apCurrentChanneldeprecated
The Current Operating frequency channel.
Integer32
Constraints:
range: 1-165
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8
apLocation
Location of the AP defined in Building.Floor.... mode.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9
apTotalTime
Time since the Ap is connected to the switch
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10
apInactiveTime
Time since the Ap has been inactive
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11
apLoadBalancing
Indicates whether Load balancing is enabled or not.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12
apChannelNoise
Indicates the noise on the channel
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13
apSignalToNoiseRatio
SNR for the BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14
apTransmitRate
Indicates Transmit rate of the channel
Enumeration
Enumerated Values:
1rate1Mbps
2rate2Mbps
3rate5point5Mbps
4rate6Mbps
5rate9Mbps
6rate11Mbps
7rate12Mbps
8rate18Mbps
9rate24Mbps
10rate36Mbps
11rate48Mbps
12rate54Mbps
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15
apReceiveRate
Indicates Receive rate of the channel
Enumeration
Enumerated Values:
1rate1Mbps
2rate2Mbps
3rate5point5Mbps
4rate6Mbps
5rate9Mbps
6rate11Mbps
7rate12Mbps
8rate18Mbps
9rate24Mbps
10rate36Mbps
11rate48Mbps
12rate54Mbps
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16
apCurrentChannelV2
The Current Operating frequency channel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.17
apSecChannelNum
The secondary channel number for 80+80MHz operation.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.18
apHTMode
The HT Mode of the AP.
.1.3.6.1.4.1.14823.2.2.1.1.3.3.1.19

wlsxSwitchGlobalAPTable

table deprecated
.1.3.6.1.4.1.14823.2.2.1.1.3.4 · 1 row entry · 7 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchGlobalAPTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchGlobalAPTable' 
This Table lists all the Access Points Connected in the 
Switch Domain. This table is valid only on a
Master switch. On a Local switch, the table is empty.
wlsxSwitchGlobalAPEntry row .1.3.6.1.4.1.14823.2.2.1.1.3.4.1
Station Management Entry
Indexes
Column Syntax OID
globalAPLocationdeprecated
Physical Location of the AP, defined in Building.Floor.Location
format.
SNMPv2-TCDisplayString
Constraints:
range: 0-32
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1
globalAPAddressdeprecated
Address of the Access Point.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2
globalAPLocalSwitchdeprecated
IP Address of the Local Switch this Access Point is connected to.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3
globalAPdot11aPhyAddrdeprecated
Physical Mac address of the module supporting dot11a in the
Access Point. AP can have support for both dot11a and dot11b
physical layer.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4
globalAPdot11bPhyAddrdeprecated
Physical Mac address of the module supporting dot11b in the
Access Point. AP can have support for both dot11a and dot11b
physical layer.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5
globalAPStatedeprecated
State of the AP.
1 -- AP is UP.
2 -- AP is DOWN.
3-7 -- Values are deprecated.
Integer32
Constraints:
range: 1-7
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6
globalAPdot11gPhyAddrdeprecated
Physical Mac address of the module supporting dot11g in the
Access Point. AP can have support for both a,b,g
physical layer.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7

wlsxSwitchAccessPointStatsTable

table
.1.3.6.1.4.1.14823.2.2.1.1.3.5 · 1 row entry · 21 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxSwitchAccessPointStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxSwitchAccessPointStatsTable' 
This Table lists the statistics of all the Access Points Connected 
to this switch.
wlsxSwitchAccessPointStatsEntry row .1.3.6.1.4.1.14823.2.2.1.1.3.5.1
Ap Stats Entry.
Indexes
Column Syntax OID
apStatsChanneldeprecated
Channel on which the ap is operating.
Integer32
Constraints:
range: 1-165
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1
apChannelBwRate
Bandwidth Rate in Kbps of the apChannel.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2
apChannelFrameRetryRate
Ap Channel Frame Retry Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3
apChannelFrameLowSpeedRate
Ap Channel Frame Low Speed Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4
apChannelFrameNonUnicastRate
Ap Channel Frame Non Unicast Packet Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5
apChannelFrameFragmentationRate
Ap Channel Frame Fragmentation Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6
apChannelFrameReceiveErrorRate
Ap Channel Frame Receive Error Rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7
apBSSTxPackets
Total Packets Transmitted by the ap on this BSSID.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8
apBSSTxBytes
Total Bytes Transmitted by the ap on this BSSID.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9
apBSSRxPackets
Total Packets Received by the ap on this BSSID
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10
apBSSRxBytes
Total Bytes Received by the ap on this BSSID.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11
apBSSBwRate
Bandwidth Rate in Kbps of the ap on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12
apBSSFrameRetryRate
Frame Retry Rate on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13
apBSSFrameLowSpeedRate
Frame Low Speed Rate on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14
apBSSFrameNonUnicastRate
Frame Non Unicast Packet Rate on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15
apBSSFrameFragmentationRate
Frame Fragmentation Rate on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16
apBSSFrameReceiveErrorRate
Frame Receive Error Rate on this BSSID.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17
apStatsChannelV2
Channel on which the ap is operating.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.18
apStatsSecChannel
The secondary channel when the ap is operating in 80+80MHz
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.19
apStatsPhyType
The phy type of the AP.
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.20
apStatsHTMode
The HT Mode of the AP.
.1.3.6.1.4.1.14823.2.2.1.1.3.5.1.21

wlsxIapBranchTable

table
.1.3.6.1.4.1.14823.2.2.1.1.5.4 · 1 row entry · 8 columns
Open in standard view
Uses the aruba variant from /opt/observium/mibs/aruba.
Command help
Walk wlsxIapBranchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WLSX-SWITCH-MIB' -M '/opt/observium/mibs/aruba:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WLSX-SWITCH-MIB::wlsxIapBranchTable' 
This table lists all the information related to IAP branches.
wlsxIapBranchEntry row .1.3.6.1.4.1.14823.2.2.1.1.5.4.1
IAP branch entry
Indexes
Column Syntax OID
iapBranchKey
Key of the IAP branch.
SNMPv2-TCDisplayString
Constraints:
range: 65-65
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.1
iapBranchName
Name of the IAP branch.
SNMPv2-TCDisplayString
Constraints:
range: 0-129
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.2
iapBranchVcMacAddress
MAC address of the Virtual Controller of the branch.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.3
iapBranchStatus
Current status of the branch
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.4
iapBranchInnerIpAddressType
Inner IP Address type IPv4 or IPv6 of the branch.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.5
iapBranchInnerIpAddress
Inner IPv4/IPv6 Address of the branch.
SNMPv2-TCDisplayString
Constraints:
range: 0-45
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.6
iapBranchAssignedSubnet
Assigned subnets of the branch.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.7
iapBranchAssignedVlan
Assigned vlans of the branch.
A string of octets containing one bit per VLAN for a
total of 4096 VLANs in the management domain.
The most significant bit of the octet string is the
lowest value VLAN of 4096 VLANs.
By se…
OctetString .1.3.6.1.4.1.14823.2.2.1.1.5.4.1.8