WESTERMO-LYNX-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
18

ontTable

table
.1.3.6.1.4.1.16177.1.2.2.2 · 1 row entry · 18 columns
Uses the westermo variant from /opt/observium/mibs/westermo.
Command help
Walk ontTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WESTERMO-LYNX-MIB' -M '/opt/observium/mibs/westermo:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WESTERMO-LYNX-MIB::ontTable'
A list of configuration entries.  The number of
entries is given by the value of ifNumber.
ontEntry row .1.3.6.1.4.1.16177.1.2.2.2.1
An interface entry containing objects at the
subnetwork layer and below for a particular
interface.
Indexes
Column Syntax OID
A unique value, greater than zero, for each port.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.16177.1.2.2.2.1.1
Enables/disables port
Enumerationr/w
Enumerated Values:
2enable
3disable
.1.3.6.1.4.1.16177.1.2.2.2.1.2
Duplex mode for port
Enumerationr/w
Enumerated Values:
2half
3full
.1.3.6.1.4.1.16177.1.2.2.2.1.3
Enable/Disable autonegotiation for port
Enumerationr/w
Enumerated Values:
2enable
3disable
.1.3.6.1.4.1.16177.1.2.2.2.1.4
Speed for port
Enumerationr/w
Enumerated Values:
10s10M
100s100M
1000s1000M
.1.3.6.1.4.1.16177.1.2.2.2.1.5
Add this port to be included in the STAT group.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.16177.1.2.2.2.1.6
Shows the port type fibre or copper.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.16177.1.2.2.2.1.7
This values handles the timesync filters for the port. The filters can be black, blue and red.
Not working in release 2.06.
Enumerationr/w
Enumerated Values:
1nonTiming
2timing
3unfiltered
.1.3.6.1.4.1.16177.1.2.2.2.1.8
This value is used to define the RSTP trunk ports. Not working in release 2.06.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.16177.1.2.2.2.1.9
This value is used to define the IGMP trunk ports. Not working in release 2.06.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.16177.1.2.2.2.1.10
This value is used to define which port that will remove the vlan tag before the packets
is send out. Not working in release 2.06.
Enumerationr/w
Enumerated Values:
1keepTag
2removeTag
.1.3.6.1.4.1.16177.1.2.2.2.1.12
This value is used define the vlan id number for each vlan id.
Each row represents a color:
1: white
2: red
3: blue
4: green
5: yellow
6: brown
7: pink
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.16177.1.2.2.2.1.13
This value is used define the vlan priority number for each vlan id. The first vlan is the same
as white vlan, vlan 2 = red vlan, vlan 3 = blue vlan, vlan 4 = green vlan, vlan 5 = yellow vlan,
vlan 6 = brown vlan and …
Enumerationr/w
Enumerated Values:
0prio0
1prio1
2prio2
3prio3
4prio4
5prio5
6prio6
7prio7
.1.3.6.1.4.1.16177.1.2.2.2.1.14
This value is used to give extra vlan values for this port.
The values can be white, red, blue, green, brown, yellow or pink,
separated by whitespace.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.16177.1.2.2.2.1.15
Default VLAN color for this port.
Enumerationr/w
Enumerated Values:
0white
1red
2blue
3green
4yellow
5brown
6pink
.1.3.6.1.4.1.16177.1.2.2.2.1.16
IGMP port color.
Enumerationr/w
Enumerated Values:
1black
3red
.1.3.6.1.4.1.16177.1.2.2.2.1.17
RSTP port status
Enumerationr/w
Enumerated Values:
1discarding
2forwarding
.1.3.6.1.4.1.16177.1.2.2.2.1.18
port link status
Enumerationr/w
Enumerated Values:
1up
2down
.1.3.6.1.4.1.16177.1.2.2.2.1.19