WC7520-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
72

wcAccessPointTable

table
.1.3.6.1.4.1.4526.100.8.2.3.1 · 1 row entry · 18 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcAccessPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcAccessPointTable' 
List of access points managed by WC7520.
MAC address is the key index for this table
wcAccessPointEntry row .1.3.6.1.4.1.4526.100.8.2.3.1.1
A row describing configuration of one managed access point.
Indexes
Column Syntax OID
wcAccessPointMac
MAC address of Access Point
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.1
wcAccessPointIp
IP address of Access Point
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.2
wcAccessPointSubnetMask
IP subnet mask of Access Point
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.3
wcAccessPointDefaultGateway
Default gateway for Access Point.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.4
wcAccessPointVlanEnable
Enable-Disable Vlan.
disable(0) : To disable Vlan
enable(1) : To enable Vlan
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.5
wcAccessPointUntaggedVlan
Access Point Untagged Vlan.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.6
wcAccessPointManagementVlan
Access Point Management Vlan
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.7
wcAccessPointName
Access Point Name
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.8
wcAccessPointModel
Access Point Model
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.9
wcAccessPointGroup
Access Point Group id
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.10
wcAccessPointAntenna
Access Point Antenna
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.11
wcAccessPointBuilding
Access Point building index.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.12
wcAccessPointFloor
Access Point floor index
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.13
wcAccessPointLocation
Access Point location string
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.14
wcAccessPointLocX
Access Point location x-axis (in meters)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.15
wcAccessPointLocY
Access Point location y-axis (in meters)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.16
wcAccessPointState
Access Point Status
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.17
wcAccessPointRowStatus
Row Status is used to apply the access point configuration.
active(1) - send rowstatus as active(1) to apply the configuration.
notReady(3) - Indicates that some columns in the row are modified and not yet applied.
notI…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.100.8.2.3.1.1.18

wcAccessPointDetailsTable

table
.1.3.6.1.4.1.4526.100.8.2.3.2 · 1 row entry · 12 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcAccessPointDetailsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcAccessPointDetailsTable' 
This table provides detailed configuration of access point.
wcAccessPointDetailsEntry row .1.3.6.1.4.1.4526.100.8.2.3.2.1
A row describing detailed configuration of one managed access point.
Indexes
Column Syntax OID
wcAccessPointDetailsMac
Access Point MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.1
wcAccessPointDetailsIp
Access Point IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.2
wcAccessPointDetailsName
Access Point Name.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.3
wcAccessPointDetailsModel
Access Point model.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.4
wcAccessPointDetailsGroup
Access Point group index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.5
wcAccessPointDetails24GHzChannel
Access Point 2.4 GHz channel.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.6
wcAccessPointDetails5GHzChannel
Access Point 5 GHz channel.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.7
wcAccessPointDetails24GHzOperatingChannel
Access Point 2.4 GHz operating channel.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.8
wcAccessPointDetails5GHzOperatingChannel
Access Point 5 GHz channel.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.9
wcAccessPointDetailsChannelMgmt
This field tells if auto channel allocation is on or not.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.10
wcAccessPointDetailsLoadBalanceMaxClients
Max number of clients for load balancing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.11
wcAccessPointDetailsLoadBalanceSignalQuality
Signal quality for load balancing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.3.2.1.12

wcClientListTable

table
.1.3.6.1.4.1.4526.100.8.2.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcClientListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcClientListTable' 
List of all the clients connected to Access points managed by WC7520
wcClientListEntry row .1.3.6.1.4.1.4526.100.8.2.4.1.1
Each row give info about a client and access point to which it is connected.
Indexes
wcClientListMac
Column Syntax OID
wcClientMac
Mac address of the client.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.1
wcClientIp
IP address of the client.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.2
wcClientLocation
client location.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.3
wcClientApName
Name of Access Point to which cleint is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.4
wcClientApIp
IP Address of Access Point to which cleint is connected.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.5
wcClientApMac
MAC address of Access Point to which cleint is connected.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.6
wcClientBssid
Brodcast SSID of Access Point.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.7
wcClientSsid
SSID of Access Point.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.1.1.8

wcClientDetailsTable

table
.1.3.6.1.4.1.4526.100.8.2.4.2 · 1 row entry · 15 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcClientDetailsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcClientDetailsTable' 
Detailed information about the clients connected to Access Points managed by WC7520.
wcClientDetailsEntry row .1.3.6.1.4.1.4526.100.8.2.4.2.1
A row describing detailed information about each client.
Indexes
wcClientListMac
Column Syntax OID
wcClientDetailsMac
MAC address of the client.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.1
wcClientDetailsAp
Name of Access Point to which client is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.2
wcClientDetailsBssid
Bssid of the client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.3
wcClientDetailsFrequency
Frequent band of client.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.4
wcClientDetailsAuth
Authentication method.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.5
wcClientDetailsCipher
Cleint cipher
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.6
wcClientDetailsAid
Client Aid
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.7
wcClientDetailsRssi
Clients RSSI
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.8
wcClientDetailsTxPower
Client transmit power
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.9
wcClientDetailsTxRate
Client transmited data rate.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.10
wcClientDetailsTxBytes
Client transmited number of bytes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.11
wcClientDetailsRxRate
Client received data rate.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.12
wcClientDetailsRxBytes
Client received number of bytes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.13
wcClientDetailsTxPackets
Client transmitted number of bytes
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.14
wcClientDetailsRxPackets
Client received number of packets
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.4.2.1.15

wcProfileGroupsTable

table
.1.3.6.1.4.1.4526.100.8.2.5.1 · 1 row entry · 5 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcProfileGroupsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcProfileGroupsTable' 
List of profile groups.
wcProfileGroupsEntry row .1.3.6.1.4.1.4526.100.8.2.5.1.1
A row describing a profile-group.
Indexes
Column Syntax OID
wcProfileGroupGroupIdx
Profile group index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.1.1.1
wcProfileGroupName
Name of profile-group
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.1.1.2
wcProfileGroupBgProfiles
Number of 802.11b/bg/ng profiles.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.1.1.3
wcProfileGroupAProfiles
Number of 802.11a/na profiles.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.1.1.4
wcProfileGroupsRowStatus
active(1) - Default value of row status.
createAndGo(4) - To create a new profile group.
group-index must be provided to add a new profile group.
Note: After creation of profile-group, …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.100.8.2.5.1.1.5

wcProfilesTable

table
.1.3.6.1.4.1.4526.100.8.2.5.2 · 1 row entry · 14 columns
Open in standard view
Uses the netgear variant from /opt/observium/mibs/netgear.
Command help
Walk wcProfilesTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'WC7520-MIB' -M '/opt/observium/mibs/netgear:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'WC7520-MIB::wcProfilesTable' 
List of all the profiles.
wcProfilesEntry row .1.3.6.1.4.1.4526.100.8.2.5.2.1
A row describing a profile. A profile is identified by
its group-index, radio-mode, and profile-index.
Indexes
Column Syntax OID
wcProfilesGroupIdx
Profile group index to which this profile belongs. for basic group index=0.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.1
wcProfilesRadioMode
Profile radio mode, one of 802.11b/bg/ng or 802.11a/na.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.2
wcProfilesIdx
Profile index which identifies a profile in a group.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.3
wcProfilesName
Profile name.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.4
wcProfilesSsid
SSID of profile.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.5
wcProfilesKeyIndex
Index of key used out of following four keys.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.9
wcProfilesKey1
key 1
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.10
wcProfilesKey2
key 2
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.11
wcProfilesKey3
key 3
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.12
wcProfilesKey4
key 4
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.13
wcProfilesVlan
Vlan
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.15
wcProfilesAuthServerGroup
Index of Authetication server group used for this profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.16
wcProfilesAclGroup
Index of ACL group used for this profile.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.17
wcProfilesRowStatus
Row Status is used to apply modified profile configuration, create and destroy a new profile.
active(1) - Indicates there is no modifications pending for commit for this profile.
notReady(3) - Indicates that some column…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4526.100.8.2.5.2.1.21