VPLS-BGP-MIB Table View

This table specifies information for configuring
and monitoring BGP-specific parameters for
Virtual Private LAN Service (VPLS).

vplsBgpConfigEntry row .1.3.6.1.2.1.10.276.1.1.1

A row in this table represents BGP-specific information
for Virtual Private LAN Service (VPLS) in a packet
network. It is indexed by vplsConfigIndex, which uniquely
identifies a single instance of a VPLS service.
…

Indexes

VPLS-GENERIC-MIBvplsConfigIndex

Column	Syntax	OID
vplsBgpConfigVERangeSize Specifies the size of the range of VPLS Edge Identifier (VE ID) in this VPLS service. This number controls the size of the label block advertised for this VE by the PE. A value of 0 indicates that the range is not con…	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.276.1.1.1.1

This table associates VPLS Edge devices to a VPLS service

vplsBgpVEEntry row .1.3.6.1.2.1.10.276.1.2.1

An entry in this table is created for each VE ID
configured on a PE for a particular VPLS service
instance.

Entries in this table may be created or deleted
through SNMP, as side effects of console or other
…

Indexes

VPLS-GENERIC-MIBvplsConfigIndex vplsBgpVEId

Column	Syntax	OID
vplsBgpVEId A secondary index identifying a VE within an instance of a VPLS service. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limited the range of this object to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.276.1.2.1.1
vplsBgpVEName Descriptive name for the site or user-facing PE (U-PE) associated with this VE ID.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.10.276.1.2.1.2
vplsBgpVEPreference Specifies the preference of the VE ID on this Provider Edge (PE) if the site is multihomed and VE ID is reused.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.2.1.10.276.1.2.1.3
vplsBgpVERowStatus This variable is used to create, modify, and/or delete a row in this table. All other objects in this row must be set to valid values before this object can be set to active(1). When a row …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.276.1.2.1.5
vplsBgpVEStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.276.1.2.1.6

This table provides BGP-specific information for
an association between a VPLS service and the
corresponding pseudowires.  A service can have more
than one pseudowire association.  Pseudowires are
defined in the pwTable.

vplsBgpPwBindEntry row .1.3.6.1.2.1.10.276.1.3.1

Each row represents an association between a
VPLS instance and one or more pseudowires
defined in the pwTable. Each index is unique
in describing an entry in this table. However,
both indexes are required to define th…

Indexes

VPLS-GENERIC-MIBvplsConfigIndex PW-STD-MIBpwIndex

Column	Syntax	OID
vplsBgpPwBindLocalVEId Identifies the local VE with which this pseudowire is associated. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limited the range of this object to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.276.1.3.1.1
vplsBgpPwBindRemoteVEId Identifies the remote VE with which this pseudowire is associated. The VE ID takes 2 octets in VPLS BGP NLRI according to RFC 4761. Hence, we have limited the range of this object to 65535.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.276.1.3.1.2