Standard view Table view

VPLS-BGP-MIB

        Copyright (c) 2014 IETF Trust and the persons
identified as authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
        
The initial version of this MIB module was published in
RFC 7257; for full legal notices see the RFC itself.
        
This MIB module contains managed object definitions for
BGP signaled Virtual Private LAN Service as in
RFC 4761.
        
This MIB module enables the use of any underlying
pseudowire network.
Source file
VPLS-BGP-MIB
Last revised
Identity
vplsBgpMIB
Base OID
1.3.6.1.2.1.10.276
Imported Objects
PW-STD-MIB pwIndex
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32
SNMPv2-TC RowStatus StorageType
VPLS-GENERIC-MIB vplsConfigIndex
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'VPLS-BGP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'VPLS-BGP-MIB::vplsBgpMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VPLS-BGP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VPLS-BGP-MIB::vplsBgpMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (19)
vplsBgpMIB
.1.3.6.1.2.1.10.276
vplsBgpObjects
.1.3.6.1.2.1.10.276.1
vplsBgpConfigTable
.1.3.6.1.2.1.10.276.1.1
vplsBgpConfigEntry
VPLS-GENERIC-MIBvplsConfigIndex
 .1.3.6.1.2.1.10.276.1.1.1
vplsBgpConfigVERangeSize r/w
Unsigned32
 .1.3.6.1.2.1.10.276.1.1.1.1
vplsBgpVETable
.1.3.6.1.2.1.10.276.1.2
vplsBgpVEEntry
VPLS-GENERIC-MIBvplsConfigIndexvplsBgpVEId
 .1.3.6.1.2.1.10.276.1.2.1
vplsBgpVEId
Unsigned32
 .1.3.6.1.2.1.10.276.1.2.1.1
vplsBgpVEName r/w
SNMP-FRAMEWORK-MIBSnmpAdminString
 .1.3.6.1.2.1.10.276.1.2.1.2
vplsBgpVEPreference r/w
Unsigned32
 .1.3.6.1.2.1.10.276.1.2.1.3
vplsBgpVERowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.10.276.1.2.1.5
vplsBgpVEStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.10.276.1.2.1.6
vplsBgpPwBindTable
.1.3.6.1.2.1.10.276.1.3
vplsBgpPwBindEntry
VPLS-GENERIC-MIBvplsConfigIndexPW-STD-MIBpwIndex
 .1.3.6.1.2.1.10.276.1.3.1
vplsBgpPwBindLocalVEId
Unsigned32
 .1.3.6.1.2.1.10.276.1.3.1.1
vplsBgpPwBindRemoteVEId
Unsigned32
 .1.3.6.1.2.1.10.276.1.3.1.2
vplsBgpConformance
.1.3.6.1.2.1.10.276.2
vplsBgpCompliances
.1.3.6.1.2.1.10.276.2.1
vplsBgpGroups
.1.3.6.1.2.1.10.276.2.2
Dependencies (15) 6 direct · 9 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. HC-PerfHist-TC-MIBrfc
  4. IANA-PWE3-MIBrfc
  5. IANAifType-MIBrfc
  6. SNMPv2-CONFrfc
  7. SNMPv2-MIBrfc
  8. IF-MIBrfc
  9. INET-ADDRESS-MIBrfc
  10. PerfHist-TC-MIBrfc
  11. PW-TC-STD-MIBrfc
  12. SNMP-FRAMEWORK-MIBrfc
  13. PW-STD-MIBrfc
  14. VPN-TC-STD-MIBrfc
  15. VPLS-GENERIC-MIBrfc
  16. VPLS-BGP-MIBrfcselected
Conformance Groups (3)
vplsBgpConfigGroup
vplsBgpConfigVERangeSize
The group of objects supporting configuration
of L2VPN VPLS services using BGP.
 .1.3.6.1.2.1.10.276.2.2.1
vplsBgpVEGroup
vplsBgpVEName vplsBgpVEPreference vplsBgpVERowStatus vplsBgpVEStorageType
The group of objects supporting management of VPLS
Edge devices for L2VPN VPLS services using BGP.
 .1.3.6.1.2.1.10.276.2.2.2
vplsBgpPwBindGroup
vplsBgpPwBindLocalVEId vplsBgpPwBindRemoteVEId
The group of objects supporting management of
pseudowires for L2VPN VPLS services using BGP.
 .1.3.6.1.2.1.10.276.2.2.3
Compliance Statements (2)

OID .1.3.6.1.2.1.10.276.2.1.1
Compliance requirement for implementations that
provide full support for VPLS-BGP-MIB.

Such devices can then be monitored and configured using
this MIB module.
Required groups
mandatory vplsBgpConfigGroup
mandatory vplsBgpVEGroup
mandatory vplsBgpPwBindGroup

OID .1.3.6.1.2.1.10.276.2.1.2
Compliance requirement for implementations that only
provide read-only support for VPLS-BGP-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
mandatory vplsBgpConfigGroup
mandatory vplsBgpVEGroup
mandatory vplsBgpPwBindGroup
Object refinements
ObjectAccessSyntaxDescription
vplsBgpConfigVERangeSize readonly
Write access is not required.
vplsBgpVEName readonly
Write access is not required.
vplsBgpVEPreference readonly
Write access is not required.
vplsBgpVERowStatus readonly
Write access is not required.