VPLS-BGP-DRAFT-01-MIB Table View

This table specifies information for configuring
and monitoring BGP specific parameters for 
Virtual Private Lan Services(VPLS).

jnxVplsBgpConfigEntry row .1.3.6.1.4.1.2636.5.10.1.1.1

A row in this table represents BGP specific information
for Virtual Private Lan Service(VPLS) in a packet network.
It is indexed by jnxVplsConfigIndex, which uniquely
identifies a single instance of a VPLS service. …

Indexes

VPLS-GENERIC-DRAFT-01-MIBjnxVplsConfigIndex

Column	Syntax	OID
jnxVplsBgpConfigVERangeSize Specifies the size of the range of VE ids in this VPLS service. This number controls the size of the label block advertised for this VE by the PE. A value of 0 indicates that the range is not configured and the PE …	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.10.1.1.1.1

This table associates VPLS Edge devices to a VPLS service

jnxVplsBgpVEEntry row .1.3.6.1.4.1.2636.5.10.1.2.1

An entry in this table is created for each VE Id
configured on a PE for a particular VPLS service
instance.

Indexes

VPLS-GENERIC-DRAFT-01-MIBjnxVplsConfigIndex jnxVplsBgpVEId

Column	Syntax	OID
jnxVplsBgpVEId A secondary index identifying a VE within an instance of a VPLS service.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.10.1.2.1.1
jnxVplsBgpVEName Descriptive name for the site or u-PE assciated with this VE Id.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.2636.5.10.1.2.1.2
jnxVplsBgpVEPreference Specifies the preference of the VE Id on this PE if the site is multi-homed and VE Id is re-used.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.2636.5.10.1.2.1.3
jnxVplsBgpVERowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except jnxVplsBgpSiteRowStatus.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2636.5.10.1.2.1.5
jnxVplsBgpVEStorageType This variable indicates the storage type for this row.	SNMPv2-TCStorageType Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.2636.5.10.1.2.1.6

This table provides BGP specific information for 
an association between a VPLS service and the 
corresponding Pseudo Wires. A service can have more 
than one Pseudo Wire association. Pseudo Wires are 
defined in the pwTable.

jnxVplsBgpPwBindEntry row .1.3.6.1.4.1.2636.5.10.1.3.1

Each row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the pwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define t…

Indexes

VPLS-GENERIC-DRAFT-01-MIBjnxVplsConfigIndex VPLS-GENERIC-DRAFT-01-MIBjnxVplsPwBindIndex

Column	Syntax	OID
jnxVplsBgpPwBindLocalVEId Identifies the local VE that this Pseudo Wire is associated with.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.10.1.3.1.1
jnxVplsBgpPwBindRemoteVEId Identifies the remote VE that this Pseudo Wire is associated with.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.2636.5.10.1.3.1.2