VMWARE-ENV-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

vmwEnvTable

table
.1.3.6.1.4.1.6876.4.20.3 · 1 row entry · 7 columns
Open in standard view
Uses the vmware variant from /opt/observium/mibs/vmware.
Command help
Walk vmwEnvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VMWARE-ENV-MIB' -M '/opt/observium/mibs/vmware:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VMWARE-ENV-MIB::vmwEnvTable' 
This table is populated from monitoring IPMI BMC device.
One conceptual row is maintained for each reporting component.
This table may be cleared by operational request to BMC and
normally is configured to stop adding new entries when full.
vmwEnvEntry row .1.3.6.1.4.1.6876.4.20.3.1
One entry for each physical component reporting its
status to ESX Operating System.
Indexes
Column Syntax OID
vmwEnvIndex
This is the identifier as reported by the vendor hardware's BMC
as per Table 32 section 32.1 SEL Event Records [1].
On ESXi: the command: localcli hardware ipmi sel list
can provide the listing of IPMI SEL entries as …
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.6876.4.20.3.1.1
vmwSubsystemType
Hardware component reporting environmental state
VMWARE-TC-MIBVmwSubsystemTypes
Type Values:
1unknown
2chassis
3powerSupply
4fan
5cpu
6memory
7battery
8temperatureSensor
9raidController
10voltage
 .1.3.6.1.4.1.6876.4.20.3.1.2
vmwHardwareStatus
Last reported state of this component
VMWARE-TC-MIBVmwSubsystemStatus
Type Values:
1unknown
2normal
3marginal
4critical
5failed
 .1.3.6.1.4.1.6876.4.20.3.1.3
vmwEventDescription
Human readable description of this event
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.6876.4.20.3.1.4
vmwEnvHardwareTime
Timestamp as reported from BMC for the SEL entry.
See CLI: 'localcli hardware ipmi sel list' for same report.
Note that BMC maintains it own clock and may not be the same
as the time ESX itself reports. On ESX: the CLI …
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.6876.4.20.3.1.5
vmwEnvHrDeviceIndex
The Index into hrDeviceTable for the hardware related to this event.
Report 0 if this entry does not have a related entry in hrDeviceTable.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.6876.4.20.3.1.6
vmwEnvSelSensorNumber
This is the BMC reported Sensor Number byte 12 from SEL Event record
as per Table 32 section 32.1 SEL Event Records [1].
IPMI Sensors are reported in hrDeviceTable and vmwEnvTable provides
the mapping to the specific en…
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.6876.4.20.3.1.7