VDSL-LINE-EXT-MCM-MIB Table View

This table contains additional information on multiple
carrier VDSL lines.  One entry in this table reflects a
profile defined by a manager which can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileEntry row .1.3.6.1.2.1.10.229.1.1.1.1

Each entry consists of a list of parameters that
represents the configuration of a multiple carrier
modulation VDSL modem.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName

Column	Syntax	OID
vdslLineMCMConfProfileTxWindowLength Specifies the length of the transmit window, counted in samples at the sampling rate corresponding to the negotiated value of N.	samplesUnsigned32r/w Constraints: range: 1-255	.1.3.6.1.2.1.10.229.1.1.1.1.1
vdslLineMCMConfProfileRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.1.1.2

This table contains transmit band descriptor configuration
information for a VDSL line.  Each entry in this table
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileTxBandEntry row .1.3.6.1.2.1.10.229.1.1.2.1

Each entry consists of a transmit band descriptor, which
is defined by a start and a stop tone index.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName vdslLineMCMConfProfileTxBandNumber

Column	Syntax	OID
vdslLineMCMConfProfileTxBandNumber The index for this band descriptor entry.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.2.1.1
vdslLineMCMConfProfileTxBandStart Start tone index for this band.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.2.1.2
vdslLineMCMConfProfileTxBandStop Stop tone index for this band.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.2.1.3
vdslLineMCMConfProfileTxBandRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the profile. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.2.1.4

This table contains receive band descriptor configuration
information for a VDSL line.  Each entry in this table
reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileRxBandEntry row .1.3.6.1.2.1.10.229.1.1.3.1

Each entry consists of a transmit band descriptor, which
is defined by a start and a stop tone index.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName vdslLineMCMConfProfileRxBandNumber

Column	Syntax	OID
vdslLineMCMConfProfileRxBandNumber The index for this band descriptor entry.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.3.1.1
vdslLineMCMConfProfileRxBandStart Start tone index for this band.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.3.1.2
vdslLineMCMConfProfileRxBandStop Stop tone index for this band.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.3.1.3
vdslLineMCMConfProfileRxBandRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.3.1.4

This table contains transmit PSD mask descriptor
configuration information for a VDSL line.  Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL line.  These
entries are defined by a manager and can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileTxPSDEntry row .1.3.6.1.2.1.10.229.1.1.4.1

Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a tone.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName vdslLineMCMConfProfileTxPSDNumber

Column	Syntax	OID
vdslLineMCMConfProfileTxPSDNumber The index for this mask descriptor entry.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.4.1.1
vdslLineMCMConfProfileTxPSDTone The tone index for which the PSD is being specified.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.4.1.2
vdslLineMCMConfProfileTxPSDPSD Power Spectral Density level in steps of 0.5dBm/Hz with an offset of -140dBm/Hz.	0.5dBm/HzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.229.1.1.4.1.3
vdslLineMCMConfProfileTxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.4.1.4

This table contains transmit maximum PSD mask descriptor
configuration information for a VDSL line.  Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem.  These
entries are defined by a manager and can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileMaxTxPSDEntry row .1.3.6.1.2.1.10.229.1.1.5.1

Each entry consists of a transmit PSD mask descriptor,
which defines the maximum power spectral density (PSD)
for a tone.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName vdslLineMCMConfProfileMaxTxPSDNumber

Column	Syntax	OID
vdslLineMCMConfProfileMaxTxPSDNumber The index for this band descriptor entry.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.5.1.1
vdslLineMCMConfProfileMaxTxPSDTone The tone index for which the PSD is being specified. There must not be multiple rows defined, for a particular profile, with the same value for this field.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.5.1.2
vdslLineMCMConfProfileMaxTxPSDPSD Power Spectral Density level in steps of 0.5dBm/Hz with an offset of -140dBm/Hz.	0.5dBm/HzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.229.1.1.5.1.3
vdslLineMCMConfProfileMaxTxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the profile. There mus…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.5.1.4

This table contains maximum receive PSD mask descriptor
configuration information for a VDSL line.  Each entry in
this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem.  These
entries are defined by a manager and can be used to
configure the VDSL line.
          
If an entry in this table is referenced by a line which
does not use MCM, it has no effect on the operation of that
line.
          
All read-create-objects defined in this table SHOULD be
stored persistently.

vdslLineMCMConfProfileMaxRxPSDEntry row .1.3.6.1.2.1.10.229.1.1.6.1

Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a
tone.

Indexes

VDSL-LINE-MIBvdslLineConfProfileName vdslLineMCMConfProfileMaxRxPSDNumber

Column	Syntax	OID
vdslLineMCMConfProfileMaxRxPSDNumber The index for this band descriptor entry.	Unsigned32 Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.6.1.1
vdslLineMCMConfProfileMaxRxPSDTone The tone index for which the PSD is being specified. There must not be multiple rows defined, for a particular profile, with the same value for this field.	Unsigned32r/w Constraints: range: 1-4096	.1.3.6.1.2.1.10.229.1.1.6.1.2
vdslLineMCMConfProfileMaxRxPSDPSD Power Spectral Density level in steps of 0.5dBm/Hz with an offset of -140dBm/Hz.	0.5dBm/HzSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.229.1.1.6.1.3
vdslLineMCMConfProfileMaxRxPSDRowStatus This object is used to create a new row or modify or delete an existing row in this table. A profile is activated by setting this object to `active'. When `active' is set, the system will validate the pro…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.229.1.1.6.1.4