V2H124-24-MIB Table View

Table of descriptive and status information about
the switch units in this system.

v2h124switchInfoEntry row .1.3.6.1.4.1.52.4.12.30.1.1.3.1

Table providing descriptions and status information for
switch units.

Indexes

v2h124swUnitIndex

Column	Syntax	OID
v2h124swUnitIndex This object identifies the switch within the system for which this entry contains information. This value can never be greater than switchNumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.1
v2h124swHardwareVer Hardware version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.2
v2h124swMicrocodeVer Microcode version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.3
v2h124swLoaderVer Loader version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.4
v2h124swBootRomVer Boot ROM code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.5
v2h124swOpCodeVer Operation code version of the main board.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.6
v2h124swPortNumber The number of ports of this switch.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.7
v2h124swPowerStatus Indicates the switch using internalPower(1), redundantPower(2) or both(3)	Enumeration Enumerated Values: 1 internalPower 2 redundantPower 3 internalAndRedundantPower	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.8
v2h124swRoleInSystem Indicates the switch is master(1), backupMaster(2) or slave(3) in this system.	Enumeration Enumerated Values: 1 master 2 backupMaster 3 slave	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.9
v2h124swSerialNumber Serial number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.10
v2h124swExpansionSlot1 Type of expansion module in this switch slot 1.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp 13 tenHundredBaseT4port 14 tenHundredBaseFxMtrj4port 15 comboStackingSfp 16 tenHundredBaseT	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.11
v2h124swExpansionSlot2 Type of expansion module in this switch slot 2.	Enumeration Enumerated Values: 1 notPresent 2 other 3 hundredBaseFxScMmf 4 hundredBaseFxScSmf 5 hundredBaseFxMtrjMmf 6 thousandBaseSxScMmf 7 thousandBaseSxMtrjMmf 8 thousandBaseXGbic 9 thousandBaseLxScSmf 10 thousandBaseT 11 stackingModule 12 thousandBaseSfp 13 tenHundredBaseT4port 14 tenHundredBaseFxMtrj4port 15 comboStackingSfp 16 tenHundredBaseT	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.12
v2h124swServiceTag Service tag serial-number of the switch.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.52.4.12.30.1.1.3.1.13

Table about statuses of individual powers.

switchIndivPowerEntry row .1.3.6.1.4.1.52.4.12.30.1.1.6.1

Table about statuses of individual powers.

Indexes

swIndivPowerUnitIndex swIndivPowerIndex

Column	Syntax	OID
swIndivPowerUnitIndex This is defined as v2h124swUnitIndex.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.1.6.1.1
swIndivPowerIndex 1 means internal power. 2 means external power.	Enumeration Enumerated Values: 1 internalPower 2 externalPower	.1.3.6.1.4.1.52.4.12.30.1.1.6.1.2
swIndivPowerStatus notPresent(1) means not present. green(2) means up. red(3) means down.	Enumeration Enumerated Values: 1 notPresent 2 green 3 red	.1.3.6.1.4.1.52.4.12.30.1.1.6.1.3

Table of descriptive and status information describing 
the configuration of each switch port. This table also 
contains information about each trunk.

portEntry row .1.3.6.1.4.1.52.4.12.30.1.2.1.1

An entry in the table, describing the configuration of
one switch port or trunk.

Indexes

portIndex

Column	Syntax	OID
portIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.1
portName The name of the port or trunk. This is the same as ifAlias in the IF-MIB (RFC2863 or later).	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.2
portType Indicates the port type of the configuration of the switch	Enumeration Enumerated Values: 1 other 2 hundredBaseTX 3 hundredBaseFX 4 thousandBaseSX 5 thousandBaseLX 6 thousandBaseT 7 thousandBaseGBIC 8 thousandBaseSfp 9 hundredBaseFxScSingleMode 10 hundredBaseFxScMultiMode	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.3
portSpeedDpxCfg Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and hal…	Enumerationr/w Enumerated Values: 1 reserved 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.4
portFlowCtrlCfg (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPressure flow control mechanism. When the port is operating in…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled 3 backPressure 4 dot3xFlowControl	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.5
portCapabilities Port or trunk capabilities.	Bitsr/w Enumerated Values: 0 portCap10half 1 portCap10full 2 portCap100half 3 portCap100full 4 portCap1000half 5 portCap1000full 6 reserved6 7 reserved7 8 reserved8 9 reserved9 10 reserved10 11 reserved11 12 reserved12 13 reserved13 14 portCapSym 15 portCapFlowCtrl	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.6
portAutonegotiation Whether auto-negotiation is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.7
portSpeedDpxStatus The operating speed and duplex mode of the switched port or trunk. If the entry represents a trunk, the speed is that of its individual members unless the member ports have been inconsistently configured in which case t…	Enumeration Enumerated Values: 1 error 2 halfDuplex10 3 fullDuplex10 4 halfDuplex100 5 fullDuplex100 6 halfDuplex1000 7 fullDuplex1000	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.8
portFlowCtrlStatus (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If the entry represents a trunk and the member ports have been inconsistently conf…	Enumeration Enumerated Values: 1 error 2 backPressure 3 dot3xFlowControl 4 none	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.9
portTrunkIndex The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to trunk at trunkIndex, defined by the corresponding trunkPort…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.2.1.1.10

Table describing the configuration and status of each 
trunk.

trunkEntry row .1.3.6.1.4.1.52.4.12.30.1.3.3.1

An entry describing the configuration and status of a
particular trunk.

Indexes

trunkIndex

Column	Syntax	OID
trunkIndex Identifies the trunk within the switch that is described by the table entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.3.3.1.1
trunkPorts The complete set of ports currently associated with this trunk.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.52.4.12.30.1.3.3.1.2
trunkCreation A value of static(1) means a statically configured trunk. A value of lacp(2) means an LACP-configured trunk.	Enumeration Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.52.4.12.30.1.3.3.1.3
trunkStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry. A trunk created by LACP cannot be manually destroyed or (re)configured.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.3.3.1.4

Table for LACP port configuration.

lacpPortEntry row .1.3.6.1.4.1.52.4.12.30.1.4.1.1

Entry for LACP port configuration. While an entry may
exist for a particular port, the port may not support
LACP and an attempt to enable LACP may result in
failure.

Indexes

lacpPortIndex

Column	Syntax	OID
lacpPortIndex The port interface of the lacpPortTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.4.1.1.1
lacpPortStatus Whether 802.3ad LACP is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.4.1.1.2

The table manages port settings for Spanning Tree 
Protocol 802.1d, or 802.1w depending on the 
value specified by staProtocolType.

staPortEntry row .1.3.6.1.4.1.52.4.12.30.1.5.2.1

The conceptual entry of staPortTable.

Indexes

No indexes recorded

Column	Syntax	OID
staPortFastForward Whether fast forwarding is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.2
staPortProtocolMigration When operating in RSTP (version 2) mode, setting this object to TRUE(1) object forces the port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.3
staPortAdminEdgePort The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed to be an edge-port and a value of FALSE(2) indicates that this port should be assumed to be a non-edge-…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.4
staPortOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of staPortAdminEdgePort and is set FALSE when a BPDU is received.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.5
staPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.6
staPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by explicit configuration or…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.7
staPortLongPathCost The contribution of this port to the path cost (as a 32 bit value) of paths towards the spanning tree root which include this port. This object is used to configure the spanning tree port path cost as a 3…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.52.4.12.30.1.5.2.1.8

This table is used to configure Rapid Spanning Tree. Only
the first row of the table is used by RST. In the future
this table may be used to support other spanning tree
protocols.

xstInstanceCfgEntry row .1.3.6.1.4.1.52.4.12.30.1.5.6.4.1

A conceptual row containing the properties of the
RST instance.

Indexes

xstInstanceCfgIndex

Column	Syntax	OID
xstInstanceCfgIndex The index for an entry in the xstInstanceCfgTable table. For RST only the first row in the table is used.	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.1
xstInstanceCfgPriority The priority of a specific spanning tree instance. The value assigned should be in the range 0-61440 in steps of 4096.	Integer32r/w Constraints: range: 0-61440	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.2
xstInstanceCfgTimeSinceTopologyChange The time (in hundredths of second) since the last topology change detected by the bridge entity in RST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.3
xstInstanceCfgTopChanges The total number of topology changes detected by this bridge in RST since the management entity was last reset or initialized.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.4
xstInstanceCfgDesignatedRoot The bridge identifier of the root of the spanning tree as determined by the Rapid Spanning Tree Protocol (802.1w) executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge …	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.5
xstInstanceCfgRootCost The cost of the path to the root as seen from this bridge of the RST.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.6
xstInstanceCfgRootPort The number of the port which offers the lowest cost path from this bridge to the root bridge of the RST .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.7
xstInstanceCfgMaxAge The maximum age of Rapid Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.8
xstInstanceCfgHelloTime The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual v…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.9
xstInstanceCfgHoldTime This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.10
xstInstanceCfgForwardDelay For the RST protocol, this time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.11
xstInstanceCfgBridgeMaxAge For RST protocol, the time (in hundredths of second) that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value o…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.12
xstInstanceCfgBridgeHelloTime For the RST protocol, the time (in hundredths of second) that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D-1990 to be 1 second.	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.13
xstInstanceCfgBridgeForwardDelay For the RST protocol, the time (in hundredths of second) that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to th…	BRIDGE-MIBTimeout	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.14
xstInstanceCfgTxHoldCount For the RST protocol, the value used by the Port Transmit state machine to limit the maximum transmission rate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.15
xstInstanceCfgPathCostMethod For RST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this…	Enumeration Enumerated Values: 1 short 2 long	.1.3.6.1.4.1.52.4.12.30.1.5.6.4.1.16

The extension table for dot1dStpPortEntry to provide 
additional Spanning Tree information and configuration.

xstInstancePortEntry row .1.3.6.1.4.1.52.4.12.30.1.5.6.5.1

The conceptual row for xstInstancePortTable.

Indexes

xstInstanceCfgIndex BRIDGE-MIBdot1dStpPort

Column	Syntax	OID
xstInstancePortPriority Defines the priority used for this port in the Spanning Tree Algorithm. If the path cost for all ports on a switch is the same, the port with the highest priority (i.e., lowest value) will be configured as an active li…	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.3
xstInstancePortState The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame: discarding(1) Port receives configuration messages, …	Enumeration Enumerated Values: 1 discarding 2 learning 3 forwarding	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.4
xstInstancePortEnable The enabled/disabled status of the port.	P-BRIDGE-MIBEnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.5
xstInstancePortPathCost The pathcost of the RST in the range 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values as…	Integer32r/w Constraints: range: 1-200000000	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.6
xstInstancePortDesignatedRoot The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.7
xstInstancePortDesignatedCost The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.8
xstInstancePortDesignatedBridge The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.	BRIDGE-MIBBridgeId Type Constraints: range: 8	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.9
xstInstancePortDesignatedPort The Port Identifier of the port on the Designated Bridge for this port's segment.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.10
xstInstancePortForwardTransitions The number of times this port has transitioned from the Learning state to the Forwarding state.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.11
xstInstancePortPortRole The role of the port in the RST protocol: (1) The port has no role within the spanning tree (2) The port is part of the active topology connecting the bridge to the root bridge (i.e., root port) (3) The port is conn…	Enumeration Enumerated Values: 1 disabled 2 root 3 designated 4 alternate 5 backup	.1.3.6.1.4.1.52.4.12.30.1.5.6.5.1.12

Table for port mirroring, enabling a port to be mirrored
to/from another port. Not all ports cannot be mirrored and
limitations may apply as to which ports can be used as either
source or destination ports.

mirrorEntry row .1.3.6.1.4.1.52.4.12.30.1.8.1.1

The conceptual row of mirrorTable.

Indexes

mirrorDestinationPort mirrorSourcePort

Column	Syntax	OID
mirrorDestinationPort The destination port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.8.1.1.1
mirrorSourcePort The source port interface for mirrored packets. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.8.1.1.2
mirrorType If this value is rx(1), receive packets will be mirrored. If this value is tx(2), transmit packets will be mirrored. If this value is both(3), both receive and transmit packets will be mirrored.	Enumerationr/w Enumerated Values: 1 rx 2 tx 3 both	.1.3.6.1.4.1.52.4.12.30.1.8.1.1.3
mirrorStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.8.1.1.4

Table for current router ports.

igmpSnoopRouterCurrentEntry row .1.3.6.1.4.1.52.4.12.30.1.9.8.1

Entry for current router ports.

Indexes

igmpSnoopRouterCurrentVlanIndex

Column	Syntax	OID
igmpSnoopRouterCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.9.8.1.1
igmpSnoopRouterCurrentPorts The set of ports which are current router ports, including static router ports. Please refer to igmpSnoopRouterStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.52.4.12.30.1.9.8.1.2
igmpSnoopRouterCurrentStatus The set of ports which are static router ports.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.52.4.12.30.1.9.8.1.3

Table for static router ports.

igmpSnoopRouterStaticEntry row .1.3.6.1.4.1.52.4.12.30.1.9.9.1

Entry for static router ports.

Indexes

igmpSnoopRouterStaticVlanIndex

Column	Syntax	OID
igmpSnoopRouterStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopR…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.9.9.1.1
igmpSnoopRouterStaticPorts The set of ports which are static router ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.52.4.12.30.1.9.9.1.2
igmpSnoopRouterStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.9.9.1.3

Table for current multicast addresses.

igmpSnoopMulticastCurrentEntry row .1.3.6.1.4.1.52.4.12.30.1.9.10.1

Entry for current multicast addresses.

Indexes

igmpSnoopMulticastCurrentVlanIndex igmpSnoopMulticastCurrentIpAddress

Column	Syntax	OID
igmpSnoopMulticastCurrentVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.9.10.1.1
igmpSnoopMulticastCurrentIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.9.10.1.2
igmpSnoopMulticastCurrentPorts The set of ports which are members of a multicast group, including static members. Please refer to igmpSnoopMulticastStaticTable.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.52.4.12.30.1.9.10.1.3
igmpSnoopMulticastCurrentStatus The set of ports which are static members.	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.52.4.12.30.1.9.10.1.4

Table for static multicast addresses.

igmpSnoopMulticastStaticEntry row .1.3.6.1.4.1.52.4.12.30.1.9.11.1

Entry for static multicast addresses.

Indexes

igmpSnoopMulticastStaticVlanIndex igmpSnoopMulticastStaticIpAddress

Column	Syntax	OID
igmpSnoopMulticastStaticVlanIndex The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qVlanIndex in the Q-BRIDGE-MIB. The entry will only appear here after a configure to igmpSnoopM…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.9.11.1.1
igmpSnoopMulticastStaticIpAddress IP address of multicast group.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.9.11.1.2
igmpSnoopMulticastStaticPorts The set of ports which are members.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.52.4.12.30.1.9.11.1.3
igmpSnoopMulticastStaticStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.9.11.1.4

A table of netConfigEntries.

netConfigEntry row .1.3.6.1.4.1.52.4.12.30.1.10.1.1

A set of configuration parameters for a particular
network interface on this device. If the device has no network
interface, this table is empty.

The index is composed of the ifIndex assigned to the
corresp…

Indexes

netConfigIfIndex netConfigIPAddress netConfigSubnetMask

Column	Syntax	OID
netConfigIfIndex The VLAN interface being used by this table entry. Only the VLAN interfaces which have an IP configured will appear in the table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.1
netConfigIPAddress The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure ou…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.2
netConfigSubnetMask The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure o…	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.3
netConfigPrimaryInterface Whether this is a primary interface.	Enumerationr/w Enumerated Values: 1 primary 2 secondary	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.4
netConfigUnnumbered Whether this is an unnumbered interface.	Enumeration Enumerated Values: 1 unnumbered 2 notUnnumbered	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.5
netConfigStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.10.1.1.6

Table to manage the control of broadcast storms for ports.

bcastStormEntry row .1.3.6.1.4.1.52.4.12.30.1.11.1.1

The conceptual row of bcastStormTable.

Indexes

bcastStormIfIndex

Column	Syntax	OID
bcastStormIfIndex The port and the trunk (including trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.1
bcastStormStatus Whether broadcast storm protection is enabled.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.2
bcastStormSampleType Sample type. If this is pkt-rate(1), then bcastStormPktRate is used to specify the broadcast storm threshold. If this is octet-rate(2), then bcastStormOctetRate determines the broadcast storm threshold. If this is perc…	Enumerationr/w Enumerated Values: 1 pkt-rate 2 octet-rate 3 percent	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.3
bcastStormPktRate Broadcast storm threshold as packets per second. If this entry is for a trunk, this is the value for each member port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.4
bcastStormOctetRate Broadcast storm threshold as octets per second. If this entry is for a trunk, this is the value for each member port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.5
bcastStormPercent Broadcast storm threshold as percentage of bandwidth.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.11.1.1.6

Table for VLAN configuration.

vlanEntry row .1.3.6.1.4.1.52.4.12.30.1.12.1.1

Entry for VLAN configuration.

Indexes

vlanIndex

Column	Syntax	OID
vlanIndex Based on dot1qVlanIndex in the Q-BRIDGE-MIB. This table has only one entry - the entry for the VLAN of the management interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.52.4.12.30.1.12.1.1.1
vlanAddressMethod Method to get the IP address.	Enumerationr/w Enumerated Values: 1 user 2 bootp 3 dhcp	.1.3.6.1.4.1.52.4.12.30.1.12.1.1.2

Table for port configuration in VLAN.

vlanPortEntry row .1.3.6.1.4.1.52.4.12.30.1.12.2.1

Entry for port configuration in VLAN.

Indexes

vlanPortIndex

Column	Syntax	OID
vlanPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of dot1qPvid in the Q-BRID…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.12.2.1.1
vlanPortMode This variable sets the 802.1Q VLAN mode. Setting it to hybrid(1) sets a hybrid link. Setting it to dot1qTrunk(2) sets a trunk link. Setting it to access(3) sets an access link.	Enumerationr/w Enumerated Values: 1 hybrid 2 dot1qTrunk 3 access	.1.3.6.1.4.1.52.4.12.30.1.12.2.1.2

Table for IP precedence priority mapping.

prioIpPrecEntry row .1.3.6.1.4.1.52.4.12.30.1.13.2.1

Entry for IP precedence priority mapping.

Indexes

prioIpPrecPort prioIpPrecValue

Column	Syntax	OID
prioIpPrecPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.13.2.1.2
prioIpPrecValue Value of IP ToS Precedence as specified in the packet header.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.13.2.1.3
prioIpPrecCos Class of Service (CoS) as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The IP ToS precedence value in the same table row will be mapped to this CoS. This CoS is then further mapped to the hardware queue a…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.13.2.1.4

Table for IP DSCP priority mapping.

prioIpDscpEntry row .1.3.6.1.4.1.52.4.12.30.1.13.4.1

Entry for IP DSCP priority mapping.

Indexes

prioIpDscpPort prioIpDscpValue

Column	Syntax	OID
prioIpDscpPort The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.13.4.1.1
prioIpDscpValue Value of IP DSCP as specified in the packet header.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.13.4.1.2
prioIpDscpCos Class of Service as defined by dot1dTrafficClassPriority in the P-BRIDGE-MIB. The prioIpDscpValue value in the same table row will be mapped to this Class of Service (COS). This CoS is then further mapped to the hard…	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.13.4.1.3

Table for IP port priority mapping.

prioIpPortEntry row .1.3.6.1.4.1.52.4.12.30.1.13.7.1

Entry for IP port priority mapping.

Indexes

prioIpPortPhysPort prioIpPortValue

Column	Syntax	OID
prioIpPortPhysPort The port and the trunk (excluding trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.13.7.1.1
prioIpPortValue IP port for this value.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.52.4.12.30.1.13.7.1.2
prioIpPortCos Class of service for this entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.13.7.1.3
prioIpPortStatus Writing this to valid(1) creates an entry. Writing this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.13.7.1.4

Table for weighted round robin (WRR).

prioWrrEntry row .1.3.6.1.4.1.52.4.12.30.1.13.9.1

Entry for weighted round robin (WRR).

Indexes

prioWrrTrafficClass

Column	Syntax	OID
prioWrrTrafficClass Traffic class for this entry, as defined in dot1dTrafficClass in the P-BRIDGE-MIB. The actual maximum depends on the hardware, and is equal to dot1dPortNumTrafficClasses-1.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.13.9.1.1
prioWrrWeight Weight for this entry.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.52.4.12.30.1.13.9.1.2

A list of trap destination entries.

trapDestEntry row .1.3.6.1.4.1.52.4.12.30.1.14.1.1

A destination entry describes the destination IP address,
the community string and SNMP version to use when sending
a trap.

Indexes

trapDestAddress

Column	Syntax	OID
trapDestAddress The address to send traps.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.14.1.1.1
trapDestCommunity A community to which this destination address belongs.	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.52.4.12.30.1.14.1.1.2
trapDestStatus Setting this to valid(1) creates an entry. Setting this to invalid(2) destroys an entry.	ValidStatusr/w Type Values: 1 valid 2 invalid	.1.3.6.1.4.1.52.4.12.30.1.14.1.1.3
trapDestVersion Determines the version of the Trap that is to be sent to the trap Receiver. If the value is 1, then a SNMP version 1 trap will be sent and if the value is 2, a SNMP version 2 trap is sent.	Enumerationr/w Enumerated Values: 1 version1 2 version2	.1.3.6.1.4.1.52.4.12.30.1.14.1.1.4

Table for rate limit of each port.

rateLimitPortEntry row .1.3.6.1.4.1.52.4.12.30.1.16.1.2.1

Entry for rate limit of each port.

Indexes

rlPortIndex

Column	Syntax	OID
rlPortIndex The port and the trunk (including trunk member) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.1
rlPortInputLimit Value of the input rate limit. Its unit is megabits per second. For a 100 Mb/s port, the range is 1 to 100. For a 1000 Mb/s port, the range is 1 to 1000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.2
rlPortOutputLimit Value of the output rate limit. Its unit is megabits per second. For a 100 Mb/s port, the range is 1 to 100. For a 1000 Mb/s port, the range is 1 to 1000.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.3
rlPortInputStatus Whether input rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.6
rlPortOutputStatus Whether output rate limit is enabled for this port.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.16.1.2.1.7

The marker table.

markerEntry row .1.3.6.1.4.1.52.4.12.30.1.16.2.1.1

Entry for marker table.

Indexes

markerIfIndex markerAclName

Column	Syntax	OID
markerIfIndex The interface index of the marker table. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.1
markerAclName The name of an ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.2
markerActionBitList The marker action bit list, in right to left order. for example: 0x3(11 in binary) means dscp(0) and precedence(1) 0x4(100 in binary) means priority(2)	Bitsr/w Enumerated Values: 0 dscp 1 precedence 2 priority	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.3
markerDscp The Dscp value of the marker entry.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.4
markerPrecedence The precedence value of the marker entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.5
markerPriority The priority value of the marker entry.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.6
markerStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.16.2.1.1.7

Table for Acl to Cos Mapping.

prioAclToCosMappingEntry row .1.3.6.1.4.1.52.4.12.30.1.16.3.1.1

Entry for Acl to Cos Mapping.

Indexes

prioAclToCosMappingIfIndex prioAclToCosMappingAclName

Column	Syntax	OID
prioAclToCosMappingIfIndex The port interface of the prioAclToCosMappingEntry. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.1
prioAclToCosMappingAclName The name of an IP ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device.	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.2
prioAclToCosMappingCosValue Cos value of the prioAclToCosMappingTable.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.3
prioAclToCosMappingStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.16.3.1.1.4

The Port Security(MAC binding) Table

portSecPortEntry row .1.3.6.1.4.1.52.4.12.30.1.17.2.1.1

The entry of portSecPortTable

Indexes

portSecPortIndex

Column	Syntax	OID
portSecPortIndex The port and the trunk (excluding trunk members) interface of the portTable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex in the IF-MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.1
portSecPortStatus Set enabled(1) to enable port security and set disabled(2) to disable port security.	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.2
portSecAction The corresponding actions that will take place when a port is under intruded, when this variable is set to none(1), no action will perform, when this variable is set to trap(2), a swPortSecurityTrap trap will send, …	Enumerationr/w Enumerated Values: 1 none 2 trap 3 shutdown 4 trapAndShutdown	.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.3
portSecMaxMacCount The maximun number of MAC addresses that will be learned and locked. When we change the value of this variable, if the portSecPortStatus is enabled, we will discard all secure MAC and begin to learn again, until the n…	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.52.4.12.30.1.17.2.1.1.4

The table for Secure Shell Connection.

sshConnInfoEntry row .1.3.6.1.4.1.52.4.12.30.1.17.6.6.1

The conceptual row for sshConnInfoTable.

Indexes

sshConnID

Column	Syntax	OID
sshConnID The connection ID of the Secure Shell Connection.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.1
sshConnMajorVersion The SSH major version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.2
sshConnMinorVersion The SSH minor version.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.3
sshConnEncryptionType The encryption type of the SSH. none(1) mean no encryption , des(2) mean using DES encryption, tribeDes mean using 3DES encryption.	Enumeration Enumerated Values: 1 none 2 des 3 tribeDes	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.4
sshConnStatus The SSH connection State. negotiationStart(1) mean the SSH is in its negotiation start state, authenticationStart(2) mean the SSH is in authentication start state, sessionStart(3) mean the SSH is in session start State.	Enumeration Enumerated Values: 1 negotiationStart 2 authenticationStart 3 sessionStart	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.5
sshConnUserName The user name of the connection.	OctetString	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.6
sshDisconnect Set the variable to disconnect to disconnect the connection, when read, this variable always return noDisconnect(1).	Enumerationr/w Enumerated Values: 1 noDisconnect 2 disconnect	.1.3.6.1.4.1.52.4.12.30.1.17.6.6.1.7

The conceptual table of all of aclIpAceEntry

aclIpAceEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.1.1

The conceptual row for aclIpAceTable.

Indexes

aclIpAceName aclIpAceIndex

Column	Syntax	OID
aclIpAceName The name of an ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.1
aclIpAceIndex The unique index of an ACE within an ACL	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.2
aclIpAcePrecedence Specifies the IP precedence value	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.3
aclIpAceAction the aclIpAceAction of aces which have the same aclIpAceName must be the same	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.4
aclIpAceSourceIpAddr The specified source IP address. The packet's source address is AND-ed with the value of aclIpAceSourceIpAddrBitmask and then compared against the value of this object.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.5
aclIpAceSourceIpAddrBitmask The specified source IP address mask	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.6
aclIpAceDestIpAddr The specified destination IP address. The packet's destination address is AND-ed with the value of aclIpAceDestIpAddrBitmask and then compared against the value of this object	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.7
aclIpAceDestIpAddrBitmask The specified destination IP address mask	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.8
aclIpAceProtocol The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700. A value value of 0 matches every IP packet. the object=256, means 'any' For example : 0 is …	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.9
aclIpAcePrec	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.10
aclIpAceTos	Integer32r/w Constraints: range: 0-8	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.11
aclIpAceDscp	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.12
aclIpAceSourcePortOp	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.13
aclIpAceMinSourcePort	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.14
aclIpAceMaxSourcePort	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.15
aclIpAceSourcePortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.16
aclIpAceDestPortOp	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.17
aclIpAceMinDestPort	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.18
aclIpAceMaxDestPort	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.19
aclIpAceDestPortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.20
aclIpAceControlCode Indicates how a the control flags of TCP packet's to be compared to be compared. aceIpControlCode is AND-ed with aceIpControlCodeBitmask	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.21
aclIpAceControlCodeBitmask Indicates how a the control flags of TCP packet's to be compared to be compared. it can be used to check multiple flags of the FIN, SYN, RST, PSH, ACK, URG by sum of FIN=1, SYN=2, RST=4, PSH=8, ACK=16, URG=32	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.22
aclIpAceStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.1.1.23

The conceptual table of all of aclMacAceEntry

aclMacAceEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.2.1

The conceptual row for aclMacAceTable.

Indexes

aclMacAceName aclMacAceIndex

Column	Syntax	OID
aclMacAceName The name of an ACL. Within a feature the name is unique used to identifies the list to which the entry belongs in the device	OctetString Constraints: range: 1-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.1
aclMacAceIndex The unique index of an ACE within an ACL	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.2
aclMacAcePrecedence Specifies the IP precedence value	Integer32 Constraints: range: 0-32	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.3
aclMacAceAction the aclMacAceAction of aces which have the same aclMacAceName must be the same	Enumerationr/w Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.4
aclMacAcePktformat used to check the packet format of the packets	Enumerationr/w Enumerated Values: 1 any 2 untagged-Eth2 3 untagged802Dot3 4 tagggedEth2 5 tagged802Dot3	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.5
aclMacAceSourceMacAddr Indicates the 48 bits destination MAC address. The specified source mac of the packet The packet's source mac address is AND-ed with the value of aceMacSourceMacAddrBitmask and then compared against the value of this o…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.6
aclMacAceSourceMacAddrBitmask The specified source mac address mask.	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.7
aclMacAceDestMacAddr Indicates the 48 bits destination MAC address. The specified destination mac of the packet The packet's destination mac address is AND-ed with the value of aceMacDestMacAddrBitmask and then compared against the value o…	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.8
aclMacAceDestMacAddrBitmask The specified destination mac address mask.	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.9
aclMacAceVidOp	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.10
aclMacAceMinVid	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.11
aclMacAceVidBitmask	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.12
aclMacAceMaxVid	Integer32r/w Constraints: range: 1-4095	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.13
aclMacAceEtherTypeOp	Enumerationr/w Enumerated Values: 1 noOperator 2 equal 3 range	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.14
aclMacAceEtherTypeBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.15
aclMacAceMinEtherType	Integer32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.16
aclMacAceMaxEtherType	Integer32r/w Constraints: range: 1536-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.17
aclMacAceStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.2.1.18

the conceptual table of aclAclGroupEntry

aclAclGroupEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.3.1

The conceptual row for aclAclGroupTable.

Indexes

aclAclGroupIfIndex

Column	Syntax	OID
aclAclGroupIfIndex the interface number specified the ACL bining to.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.1
aclAclGroupIngressIpAcl specified the ingress ip acl(standard or extended) binding to the interface.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.2
aclAclGroupEgressIpAcl specified the egress ip acl(standard or extended) binding to the interface.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.3
aclAclGroupIngressMacAcl specified the ingress mac acl binding to the interface.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.4
aclAclGroupEgressMacAcl specified the egress mac acl binding to the interface.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.52.4.12.30.1.17.7.3.1.5

the conceptual table of aclIngressIpMaskEntry

aclIngressIpMaskEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.4.1

The conceptual row for aclIngressIpMaskTable.

Indexes

aclIngressIpMaskIndex

Column	Syntax	OID
aclIngressIpMaskIndex	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.1
aclIngressIpMaskPrecedence	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.2
aclIngressIpMaskIsEnableTos	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.3
aclIngressIpMaskIsEnableDscp	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.4
aclIngressIpMaskIsEnablePrecedence	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.5
aclIngressIpMaskIsEnableProtocol	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.6
aclIngressIpMaskSourceIpAddrBitmask	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.7
aclIngressIpMaskDestIpAddrBitmask	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.8
aclIngressIpMaskSourcePortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.9
aclIngressIpMaskDestPortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.10
aclIngressIpMaskControlCodeBitmask	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.11
aclIngressIpMaskStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.4.1.12

the conceptual table of aclEgressIpMaskEntry

aclEgressIpMaskEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.5.1

The conceptual row for aclEgressIpMaskTable.

Indexes

aclEgressIpMaskIndex

Column	Syntax	OID
aclEgressIpMaskIndex	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.1
aclEgressIpMaskPrecedence	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.2
aclEgressIpMaskIsEnableTos	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.3
aclEgressIpMaskIsEnableDscp	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.4
aclEgressIpMaskIsEnablePrecedence	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.5
aclEgressIpMaskIsEnableProtocol	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.6
aclEgressIpMaskSourceIpAddrBitmask	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.7
aclEgressIpMaskDestIpAddrBitmask	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.8
aclEgressIpMaskSourcePortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.9
aclEgressIpMaskDestPortBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.10
aclEgressIpMaskControlCodeBitmask	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.11
aclEgressIpMaskStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.5.1.12

the conceptual table of aclIngressMacMaskEntry

aclIngressMacMaskEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.6.1

The conceptual row for aclIngressMacMaskTable.

Indexes

aclIngressMacMaskIndex

Column	Syntax	OID
aclIngressMacMaskIndex	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.1
aclIngressMacMaskPrecedence	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.2
aclIngressMacMaskSourceMacAddrBitmask	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.3
aclIngressMacMaskDestMacAddrBitmask	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.4
aclIngressMacMaskVidBitmask	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.5
aclIngressMacMaskEtherTypeBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.6
aclIngressMacMaskIsEnablePktformat	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.7
aclIngressMacMaskStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.6.1.8

the conceptual table of aclEgressMacMaskEntry

aclEgressMacMaskEntry row .1.3.6.1.4.1.52.4.12.30.1.17.7.7.1

The conceptual row for aclEgressMacMaskTable.

Indexes

aclEgressMacMaskIndex

Column	Syntax	OID
aclEgressMacMaskIndex	Integer32 Constraints: range: 1-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.1
aclEgressMacMaskPrecedence	Integer32 Constraints: range: 0-16	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.2
aclEgressMacMaskSourceMacAddrBitmask	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.3
aclEgressMacMaskDestMacAddrBitmask	OctetStringr/w Constraints: range: 6-6	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.4
aclEgressMacMaskVidBitmask	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.5
aclEgressMacMaskEtherTypeBitmask	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.6
aclEgressMacMaskIsEnablePktformat	P-BRIDGE-MIBEnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.7
aclEgressMacMaskStatus The status of this conceptual row entry. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - `active', which indicate…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.52.4.12.30.1.17.7.7.1.8

Table for SNTP servers

sntpServerEntry row .1.3.6.1.4.1.52.4.12.30.1.23.1.4.1

Entry for SNTP servers.

Indexes

sntpServerIndex

Column	Syntax	OID
sntpServerIndex The index of a server. This table has fixed size.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.52.4.12.30.1.23.1.4.1.1
sntpServerIpAddress The IP address of a server. Valid IP addresses must occupy contiguous indexes. All IP addresses after the last valid index is 0.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.52.4.12.30.1.23.1.4.1.2

This table contain the information of the file system,
we can also perform the delete, set startup file operation.

fileInfoEntry row .1.3.6.1.4.1.52.4.12.30.1.24.2.1.1

A conceptually row for fileInfoTable.

Indexes

fileInfoUnitID fileInfoFileName

Column	Syntax	OID
fileInfoUnitID The unit of the switch in a stacking system, in a non-stacking system, it value is always 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.1
fileInfoFileName The file Name of the file System in the device.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.2
fileInfoFileType The file type of the file System in the device.	Enumeration Enumerated Values: 1 diag 2 runtime 3 syslog 4 cmdlog 5 config 6 postlog 7 private 8 certificate 9 webarchive	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.3
fileInfoIsStartUp This flag indicate whether this file is a startup file, Setting this object to truth(1) to indicate this is a startup file, setting this object to false(2) is a invalid operation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.4
fileInfoFileSize The sizes( in bytes) of the file.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.5
fileInfoCreationTime The creation time of the file.	OctetString Constraints: range: 20-20	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.6
fileInfoDelete Writing this object to delete(2) to delete a file, when read, this always return noDelete(1).	Enumerationr/w Enumerated Values: 1 noDelete 2 delete	.1.3.6.1.4.1.52.4.12.30.1.24.2.1.1.7