UTS-FAULT-MIB Table View

The content of the active alarm table is not the individual alarms. 
Each entry in the table is corresponding to a specific alarm condition 
existing at a particular MO instance. That is, alarm OID and originating
MO instance ID (not the module that detects the alarm condition,
but rather the module that is experiencing the reported problem)
 together will uniquely identify an entry in the active alarm table. 
Multiple alarms for the same fault condition happened at the same 
MO instance might be generated by the application that detects 
the fault condition, only one entry will be registered in the active alarm table.

utActiveAlarmEntry row .1.3.6.1.4.1.1949.2.3.2.2.4.1

Indexes

utActiveAlarmEntryID

Column	Syntax	OID
utActiveAlarmEntryID to differentiate the entries in the table	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.4.1.1
utActiveAlarmObjectID as defined in the MIB with the NOTIFICATION-TYPE macro	ObjectIdentifier	.1.3.6.1.4.1.1949.2.3.2.2.4.1.2
utActiveAlarmSourceMO from where the alarm is originated	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.1949.2.3.2.2.4.1.3
utActiveAlarmSeqNo	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.4.1.4
utActiveAlarmFirstDectetTime when the alarm is initially detected and reported	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1949.2.3.2.2.4.1.5
utActiveAlarmLastReportTime when the alarm is last reported	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1949.2.3.2.2.4.1.6
utActiveAlarmRepeatedNumbers number of reports for the same alarm from the same alarm source	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.4.1.7
utActiveAlarmSeverity reported severity from alarm source	AlarmSeverity Type Values: 0 alarmLevelClear 1 alarmLevelWarning 2 alarmLevelMinor 3 alarmLevelMajor 4 alarmLevelCritical 5 alarmLevelIndeterminate	.1.3.6.1.4.1.1949.2.3.2.2.4.1.8
utActiveAlarmFirstTrapPDU a pointer to the first trap pdu(for synchronizing)	OctetString	.1.3.6.1.4.1.1949.2.3.2.2.4.1.9
utActiveAlarmClearingFlag rowstatus of the table.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1949.2.3.2.2.4.1.10

The contents of historical alarm table include all the alarms generated before. If alarm numbers
in the table are up to table dimension, new subsequent alarms will replace the oldest alarms.
          
only support get operation.

utHistoryAlarmEntry row .1.3.6.1.4.1.1949.2.3.2.2.5.1

Indexes

utHistoryAlarmSeqNo

Column	Syntax	OID
utHistoryAlarmSeqNo	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.5.1.1
utHistoryAlarmTrapPDU	OctetString	.1.3.6.1.4.1.1949.2.3.2.2.5.1.2

The contents of historical event table include all the events generated before. If event numbers
in the table are up to table dimension, new subsequent events will replace the oldest events.
          
only support get operation.

utHistoryEventEntry row .1.3.6.1.4.1.1949.2.3.2.2.6.1

Indexes

utHistoryEventSeqNo

Column	Syntax	OID
utHistoryEventSeqNo	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.6.1.1
utHistoryEventTrapPDU	OctetString	.1.3.6.1.4.1.1949.2.3.2.2.6.1.2

The table is used for clearing a specfic alarm in active alarm table.

utAlarmClearActionEntry row .1.3.6.1.4.1.1949.2.3.2.2.7.1

ACTION_TABLE

Indexes

utAlarmClearActionCmd

Column	Syntax	OID
utAlarmClearActionCmd	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1949.2.3.2.2.7.1.1
utAlarmClearActionCorrelationNo	OctetStringr/w	.1.3.6.1.4.1.1949.2.3.2.2.7.1.2
utAlarmClearActionSeqNo	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1949.2.3.2.2.7.1.3
utAlarmClearActionRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1949.2.3.2.2.7.1.4

By adding an alarm delay rule downto an NE, 
a certain alarm can be delayed in agent, before it is sent to OMC. 
An alarm delay rule may include any combination of below conditions

utFmAlarmDelayEntry row .1.3.6.1.4.1.1949.2.3.2.2.10.1

Indexes

utFmAlarmDelayRuleID

Column	Syntax	OID
utFmAlarmDelayRuleID Once a delay rule is set to NE, the delay rule takes effective immediately. If the total number of alarm delay rules exceeds 16 on an NE, the NE should deny any new delay rules.	Unsigned32 Constraints: range: 1-16	.1.3.6.1.4.1.1949.2.3.2.2.10.1.1
utFmAlarmDelaySeverity ENUM Bit mask alarmLevelClear :Bit(0), alarmLevelWarning :Bit(1) alarmLevelMinor :Bit(2) alarmLevelMajor :Bit(3) alarmLevelCritical :Bit(4) default value: 0x11110(30) DEFAULT:{30}	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1949.2.3.2.2.10.1.2
utFmAlarmDelayType ENUM Bit mask AlarmTypeCommunication:Bit(2) AlarmTypeEquipment: Bit(3) AlarmTypeEnvironmental: Bit(4) AlarmTypeProcessingError: Bit(10) AlarmTypeQualityOfService: Bit(11) default value:0x110000011100(3100) DEFAULT:{3100}	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1949.2.3.2.2.10.1.3
utFmAlarmDelayResourceType Available values are all potential Entity Types of this NE, and All. The default value is All (0). DEFAULT:{0}	AlarmResourceTyper/w Type Values: 0 alarmResourceTypeDefault 1 alarmResourceInnerSofModuleComm 2 alarmResourceGenSoftErr 3 alarmResourceInterBoardComm 4 alarmResourcePlatformSoft 5 alarmResourceSoftModule 6 alarmResourceInterSoftModule 7 alarmResourceNeExtComm 21 alarmResourceMtp1Protocol 22 alarmResourceMtp2Protocol 23 alarmResourceMtp3Protocol 24 alarmResourceM3uaProtocol 25 alarmResourceSccpProtocol 26 alarmResourceIsupProtocol 27 alarmResourceRanapProtocol 28 alarmResourceMapBProtocol 29 alarmResourceMapGdProtocol 30 alarmResourceMapCProtocol 31 alarmResourceMapDProtocol 32 alarmResourceMapEProtocol 33 alarmResourceMapGProtocol 34 alarmResourceMapGrProtocol 35 alarmResourceMapGcProtocol 36 alarmResourceMapLhProtocol 37 alarmResourceMapLgProtocol 38 alarmResourceSaalProtocol 39 alarmResourceCapProtocol 40 alarmResourceInapProtcol 41 alarmResourceGtpProtocol 42 alarmResourceMegacoProtocol 43 alarmResourceGmmProtocol 44 alarmResourceBssapProtocol 45 alarmResourceSmProtocol 46 alarmResourceSgsnSmProtocol 47 alarmResourceGiInterface 48 alarmResourceImaProtocol 49 alarmResourceStcProtocol 50 alarmResourceAlCapProtocol 51 alarmResourceGtpUProtocol 71 alarmResourceMtp3link 72 alarmResourceMtp3linkSet 73 alarmResourceMtp3RouteSet 74 alarmResourceMtp3BLink 75 alarmResourceMtp3BLinkSet 76 alarmResourceMtp3BRouteSet 77 alarmResourceAssociation 78 alarmResourceM3uaPsp 79 alarmResourceM3uaPs 80 alarmResourceTrunk 81 alarmResourceTrunkCircuit 82 alarmResourceH110TimeSlot 83 alarmResourceStmlink 84 alarmResourceIpLink 85 alarmResourceSccopLink 86 alarmResourceAal2Pvc 87 alarmResourceAal5Pvc 111 alarmResourceCdr 112 alarmResourceCell 113 alarmResourceHwRcsource 114 alarmResourceSaFailure 115 alarmResourcePlatformMgmtChannel 116 alarmResourceIpOrMacAddr 117 alarmResourceCpHaControl 118 alarmResourceUsrDialog 119 alarmResourceDbConn 120 alarmResourceAuthentication 121 alarmResourceGmlcRoute 151 alarmResourceTca	.1.3.6.1.4.1.1949.2.3.2.2.10.1.4
utFmAlarmDelayAlarmID Available values are all potential Alarm ID of this NE, and All. The default value is All DEFAULT:{0.0}	ObjectIdentifierr/w	.1.3.6.1.4.1.1949.2.3.2.2.10.1.5
utFmAlarmDelayBeginTime Effective Timespan (FromTime and ToTime). This condition specifies the effective timespan within a day. FromTime should prior to ToTime. The timespan cannot stride 00:00AM. The format of FromTime and ToTime is HH:MM …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1949.2.3.2.2.10.1.6
utFmAlarmDelayEndTime Effective Timespan (FromTime and ToTime). This condition specifies the effective timespan within a day. FromTime should prior to ToTime. The timespan cannot stride 00:00AM. The format of FromTime and ToTime is HH:MM …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1949.2.3.2.2.10.1.7
utFmAlarmDelaySecond Delay SecondsThe valid value is (0,60*60*24). In other words, the maximum delay time is 24 hours.	Unsigned32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.1949.2.3.2.2.10.1.8
utFmAlarmDelayRowStatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1949.2.3.2.2.10.1.9