UTEPON4000FAULT-MIB
Contains UT EPON 4000 MIB Extensions.
- Source file
UTEPON4000FAULT-MIB- Last revised
- Identity
utsGeponBBS4000Fault- Base OID
1.3.6.1.4.1.1949.1.3.10.200.6.3
Imported Objects
| alarmBBS4000ModuleType (no object page) alarmDiagStatus (no object page) alarmErrorData (no object page) alarmErrorDataStr (no object page) alarmFanNumber (no object page) alarmIgmpGrpAddr (no object page) alarmIgmpIIf (no object page) alarmIgmpOIf (no object page) alarmIgmpProxyStatus (no object page) alarmLogicalPort (no object page) alarmModule (no object page) alarmPort alarmPowerSlotNumber (no object page) alarmPowerSlotStatus (no object page) alarmRdsSvrIdx (no object page) alarmRdsSvrIp (no object page) alarmResourceInt (no object page) alarmSeqNo (no object page) alarmSessionId (no object page) alarmSeverity alarmTaskName (no object page) alarmType | |
| BRIDGE-MIB | BridgeId MacAddress Timeout |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString ifIndex |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus TruthValue |
| UTS-BBS-COMMON-MIB | utsGeponBBS4000 |
| UTS-FAULT-MIB | utAlarmClearType utAlarmOccurrenceTime utAlarmProbableCause utAlarmResourceType utAlarmSeqNo utAlarmSeverity utAlarmType |
| UTSECURITY-MIB | utsDot3Security8021xRadiusSvrPrimaryOnuAuthIP (no object page) |
Net-SNMP examples using the utstarcom MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'UTEPON4000FAULT-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'UTEPON4000FAULT-MIB::utsGeponBBS4000Fault'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'UTEPON4000FAULT-MIB' -M '/opt/observium/mibs/utstarcom:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'UTEPON4000FAULT-MIB::utsGeponBBS4000Fault'
Objects (2)
Showing 2 of 2 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1949.1.3.10.200.6.3 |
||
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1 |
Dependencies (17) 8 direct · 9 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- BRIDGE-MIBrfc
- RFC1155-SMIrfc
- RFC-1212rfc
- RFC1213-MIBrfc
- UTS-COMMON-MIButstarcom
- UTS-BBS-COMMON-MIButstarcom
- UTS-COMMON-TC-MIButstarcom
- UTS-FAULT-MIButstarcom
- WACOS-GW-ROOT-MIButstarcom
- UTS-EPON-MIButstarcom
- UTSECURITY-MIButstarcom
- UTEPON4000FAULT-MIButstarcomselected
Notifications / Traps (19)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.1 |
Serial bus com OK.
|
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.12 |
when temperature back to normal, clear the alarm!
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.14 |
when temperature too high, raise the alarm
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmFanNumber (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.16 |
when fan normal, clear the alarm!
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmFanNumber (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.18 |
when fam abnormal, raise the alarm
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmPowerSlotNumber (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.20 |
when fan normal, clear the alarm!
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmPowerSlotNumber (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.22 |
when fam abnormal, raise the alarm
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmPort (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.28 |
when download the pon image ok, clear the alarm!
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.3 |
Serial bus com abnormal
|
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmPort (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.30 |
when downlaod image to the pon port fail, raise the alarm
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmPort (unresolved reference) alarmLogicalPort (unresolved reference) alarmMacAddress (unresolved reference) alarmEponOnuHwType (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.32 |
Clear when PON shutdown or ONU shutdown or ONU link down or UNI link up.
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmPort (unresolved reference) alarmLogicalPort (unresolved reference) alarmMacAddress (unresolved reference) alarmEponOnuHwType (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.34 |
Raise when ONU link up but UNI port link down.
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmBBS4000ModuleType (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.36 |
Card Insert for bbs 4000!
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmBBS4000ModuleType (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.38 |
Card remove for bbs 4000
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.4 |
when the invalid card plug out, clear the alarm!
|
|
utEventSeqNo (unresolved reference) utEventOccurrenceTime (unresolved reference) alarmModule (unresolved reference) alarmBBS4000ModuleType (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.40 |
BBS 4000 Card Insert Event!
|
|
utEventSeqNo (unresolved reference) utEventOccurrenceTime (unresolved reference) alarmModule (unresolved reference) alarmBBS4000ModuleType (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.42 |
BBS 4000 card Remove Event!
|
|
utEventSeqNo (unresolved reference) utEventOccurrenceTime (unresolved reference) alarmModule (unresolved reference) alarmBBS4000ModuleType (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.45 |
Send out when card has been detected not present without hotswap or card failure!
|
|
UTS-FAULT-MIButAlarmSeqNo UTS-FAULT-MIButAlarmOccurrenceTime UTS-FAULT-MIButAlarmSeverity UTS-FAULT-MIButAlarmProbableCause UTS-FAULT-MIButAlarmType UTS-FAULT-MIButAlarmClearType UTS-FAULT-MIButAlarmResourceType alarmModule (unresolved reference) alarmSessionId (unresolved reference)
|
.1.3.6.1.4.1.1949.1.3.10.200.6.3.1.0.6 |
when the card insert and detect the invalid card that system do not recognize.
|
