MSERIES-ALARM-MIB
Monitored by Observium This is the enterprise specific Alarm MIB for SmartOptics M-Series
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Graphs
Explore Observium network monitoring
- Source file
MSERIES-ALARM-MIB- Last revised
- Identity
smartAlarm- Base OID
1.3.6.1.4.1.30826.1.1
Imported Objects
| MSERIES-MIB | mseries |
| MSERIES-TC | AlarmNotificationType AlarmPerceivedSeverity AlarmProbableCause PortType UnitType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString |
Net-SNMP examples using the smartoptics MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MSERIES-ALARM-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MSERIES-ALARM-MIB::smartAlarm'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MSERIES-ALARM-MIB' -M '/opt/observium/mibs/smartoptics:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MSERIES-ALARM-MIB::smartAlarm'
Objects (44)
3 directly used by Observium
Showing 44 of 44 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
| smartAlarm | .1.3.6.1.4.1.30826.1.1 | |
alarmGeneralOBS ✓ | .1.3.6.1.4.1.30826.1.1.1 | |
| smartAlarmGeneralLastSeqNumber | SNMPv2-SMICounter32 | .1.3.6.1.4.1.30826.1.1.1.1 |
| smartAlarmGeneralHighestSeverity | MSERIES-TCAlarmPerceivedSeverity | .1.3.6.1.4.1.30826.1.1.1.2 |
| smartAlarmGeneralNumberActiveListOBS ✓ | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.30826.1.1.1.3 |
| smartAlarmGeneralNumberLogListOBS ✓ | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.30826.1.1.1.4 |
.1.3.6.1.4.1.30826.1.1.2 | ||
| alarmActiveTable | .1.3.6.1.4.1.30826.1.1.2.1 | |
| alarmEntry | .1.3.6.1.4.1.30826.1.1.2.1.1 | |
| alarmIndex | Unsigned32 | .1.3.6.1.4.1.30826.1.1.2.1.1.1 |
| alarmPortName | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.2.1.1.10 |
| alarmPortType | MSERIES-TCPortType | .1.3.6.1.4.1.30826.1.1.2.1.1.11 |
| alarmType | MSERIES-TCAlarmNotificationType | .1.3.6.1.4.1.30826.1.1.2.1.1.12 |
| alarmCause | MSERIES-TCAlarmProbableCause | .1.3.6.1.4.1.30826.1.1.2.1.1.13 |
| alarmPortAlias | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.2.1.1.14 |
| alarmUnit | MSERIES-TCUnitType | .1.3.6.1.4.1.30826.1.1.2.1.1.2 |
| alarmPort | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.30826.1.1.2.1.1.3 |
| alarmText | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.2.1.1.4 |
| alarmSeverity | MSERIES-TCAlarmPerceivedSeverity | .1.3.6.1.4.1.30826.1.1.2.1.1.5 |
| alarmActivationTime | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.30826.1.1.2.1.1.6 |
| alarmCeaseTime | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.30826.1.1.2.1.1.7 |
| alarmSeqNumber | SNMPv2-SMICounter32 | .1.3.6.1.4.1.30826.1.1.2.1.1.8 |
| alarmHostName | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.2.1.1.9 |
.1.3.6.1.4.1.30826.1.1.3 | ||
| alarmLogTable | .1.3.6.1.4.1.30826.1.1.3.1 | |
| alarmLogEntry | .1.3.6.1.4.1.30826.1.1.3.1.1 | |
| alarmLogIndex | Unsigned32 | .1.3.6.1.4.1.30826.1.1.3.1.1.1 |
| alarmLogPortName | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.3.1.1.10 |
| alarmLogPortType | MSERIES-TCPortType | .1.3.6.1.4.1.30826.1.1.3.1.1.11 |
| alarmLogType | MSERIES-TCAlarmNotificationType | .1.3.6.1.4.1.30826.1.1.3.1.1.12 |
| alarmLogCause | MSERIES-TCAlarmProbableCause | .1.3.6.1.4.1.30826.1.1.3.1.1.13 |
| alarmLogUnit | MSERIES-TCUnitType | .1.3.6.1.4.1.30826.1.1.3.1.1.2 |
| alarmLogPort | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.30826.1.1.3.1.1.3 |
| alarmLogText | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.3.1.1.4 |
| alarmLogSeverity | MSERIES-TCAlarmPerceivedSeverity | .1.3.6.1.4.1.30826.1.1.3.1.1.5 |
| alarmLogActivationTime | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.30826.1.1.3.1.1.6 |
| alarmLogCeaseTime | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.30826.1.1.3.1.1.7 |
| alarmLogSeqNumber | SNMPv2-SMICounter32 | .1.3.6.1.4.1.30826.1.1.3.1.1.8 |
| alarmLogHostName | SNMPv2-TCDisplayString | .1.3.6.1.4.1.30826.1.1.3.1.1.9 |
.1.3.6.1.4.1.30826.1.1.4 | ||
.1.3.6.1.4.1.30826.1.1.4.0 | ||
.1.3.6.1.4.1.30826.1.1.5 | ||
.1.3.6.1.4.1.30826.1.1.5.1 | ||
.1.3.6.1.4.1.30826.1.1.5.2 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- MSERIES-MIBsmartoptics
- SNMPv2-TCrfc
- MSERIES-TCsmartoptics
- SNMPv2-CONFrfc
- MSERIES-ALARM-MIBsmartopticsselected
Conformance Groups (4)
|
smartAlarmGeneralLastSeqNumber smartAlarmGeneralHighestSeverity smartAlarmGeneralNumberActiveList smartAlarmGeneralNumberLogList
The general alarm objects V1.
|
.1.3.6.1.4.1.30826.1.1.5.1.1
|
|
|
alarmNotificationCleared alarmNotificationCritical alarmNotificationMajor alarmNotificationMinor alarmNotificationWarning
The alarm notifications V1.
|
.1.3.6.1.4.1.30826.1.1.5.1.2
|
|
|
alarmIndex alarmUnit alarmPort alarmText alarmSeverity alarmActivationTime alarmCeaseTime alarmSeqNumber alarmHostName alarmPortName alarmPortType alarmType alarmCause
The active alarm table objects V1.
|
.1.3.6.1.4.1.30826.1.1.5.1.3
|
|
|
alarmLogIndex alarmLogUnit alarmLogPort alarmLogText alarmLogSeverity alarmLogActivationTime alarmLogCeaseTime alarmLogSeqNumber alarmLogHostName alarmLogPortName alarmLogPortType alarmLogType alarmLogCause
The alarm log table objects V1.
|
.1.3.6.1.4.1.30826.1.1.5.1.4
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.30826.1.1.5.2.1Basic implementation requirements for the alarm MIB V1.
Required groups
| mandatory | smartAlarmGeneralGroupV1 | |
| mandatory | smartAlarmNotificationGroupV1 | |
| mandatory | smartAlarmActiveTableGroupV1 | |
| mandatory | smartAlarmLogTableGroupV1 |
Notifications / Traps (5)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.30826.1.1.4.0.1 |
Sent when an alarm is cleared.
|
|
.1.3.6.1.4.1.30826.1.1.4.0.2 |
Sent when an alarm with warning severity is activated.
|
|
.1.3.6.1.4.1.30826.1.1.4.0.3 |
Sent when an alarm with minor severity is activated.
|
|
.1.3.6.1.4.1.30826.1.1.4.0.4 |
Sent when an alarm with major severity is activated..
|
|
.1.3.6.1.4.1.30826.1.1.4.0.5 |
Sent when an alarm with critical severity is activated.
|