TROPIC-PTP-MIB Table View

This table provides global parameters for a
PTP-capable card.

tnPtpSystemEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1

Configuration information concerning PTP of the
card.

Indexes

TROPIC-SHELF-MIBtnShelfIndex TROPIC-SLOT-MIBtnSlotIndex

Column	Syntax	OID
tnPtpSystemClockMode This parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clock …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.1
tnPtpSystemFrequencyReference This parameter determines the frequency reference for the PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 1/2/3/6/7/8 …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.2
tnPtpSystemTimeReference This parameter determines the time reference for the local PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 2/3 0: no r…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.3
tnPtpSystemNextClockNumber This parameter indicates the next available clock number in the card, which will be used when the user wants to create a new row in the tnPtpClockDefaultDSConfigTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.4
tnPtpSystemClockProfile This parameter determines the PTP profile of the card. It is intended to be managed by the System Operator. 0: IEEE_1588_2008_CCSA profile 1: G_8275_1 profile.	Enumerationr/w Enumerated Values: 0 ieee-1588-2008-CCSA 1 g-8275-1	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.5
tnPtpSystemClockServoMode This parameter determines the PTP Servo Mode of the card. It is intended to be managed by the System Operator. 0: bellLabs 1: standard	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.6
tnPtpSystemToDMessageType ToD message format type. 0: ccsa 1: itu.	Enumerationr/w Enumerated Values: 0 ccsa 1 itu	.1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.7

This table provides configurable information
for an OC/BC PTP clock.  For TC (E2E or P2P),
this table is not available.

tnPtpClockDefaultDSConfigEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1

Configurations of an OC/BC PTP clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockIndex A unique value which identifies a PTP clock in an NE.	AluWdmPtpClockIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.1
tnPtpClockDefaultDSConfigDomain The domain associated with the PTP clock.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.2
tnPtpClockDefaultDSConfigPriority1 The priority1 value of the PTP clock.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.3
tnPtpClockDefaultDSConfigPriority2 The priority2 value of the PTP clock.	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.4
tnPtpClockDefaultDSConfigPreferedGM The identifier of a PTP clock that the local PTP clock will lock to. It is for static master clock selection. It is valid for OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference =3. NULL is init…	AluWdmPtpClockIdentifierr/w Type Constraints: range: 8	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.5
tnPtpClockDefaultDSConfigIpAddressType This parameter indicates the IP address type for tnPtpClockDefaultDSConfigIpAddress. The default value is IPv4(1).	InetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 16 dns	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.6
tnPtpClockDefaultDSConfigIpAddress The unicast IP address of the PTP clock. NULL is initializing value.	InetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.7
tnPtpClockDefaultDSConfigAdminStatus It is used for the user to enable/disable the PTP clock. 0: Disable 1: Enable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.8
tnPtpClockDefaultDSConfigRowStatus The RowStatus of PTP clock entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.9
tnPtpClockDefaultDSConfigLocalPriority The localPriority value of the PTP clock.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.10
tnPtpClockDefaultDSConfigMaxStepsRemoved A clock would not qualify any Announce messages received where the stepsRemoved field in the ingress header matched or exceeded the maxStepsRemoved field.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.11
tnPtpClockDefaultDSConfigEPRTCSupport Enable/Disable Enhanced Primary Reference Time Clock.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.12
tnPtpClockDefaultDSConfigSyncUncertainMon Enable/Disable Synchronization Uncertain Indication Monitoring.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.13

This table provides non-configurable information for
an OC/BC PTP clock.  For TC (E2E or P2P), this table
is not available.

tnPtpClockDefaultDSInfoEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1

Information of an OC/BC PTP clock

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockDefaultDSInfoIdentifier The identifier of the PTP clock.	AluWdmPtpClockIdentifier Type Constraints: range: 8	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.1
tnPtpClockDefaultDSInfoTwoStepFlag This is an indicator of whether master-slave synchronization utilizes follow-up messaging (IEEE 1588-2008 Section 8.2.1.2.1.). This parameter is read-only. A PTP port has a configurable parameter which determines if f…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.2
tnPtpClockDefaultDSInfoNumberOfPorts The number of PTP ports in the PTP clock.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.3
tnPtpClockDefaultDSInfoClass The clock class on the PTP clock (IEEE1588-2008 Section 8.2.1.3.1.1).	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.4
tnPtpClockDefaultDSInfoAccuracy The accuracy of the PTP clock	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.5
tnPtpClockDefaultDSInfoOffsetScaledLogVariance The frequency offset scaled log variance of the PTP clock (IEEE P1588-2008 Section 7.6.3).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.6

This table provides tn PTP Clock current Data
Set for an OC/BC PTP Clock.  For TC (E2E or P2P),
this table is not available.

tnPtpClockCurrentDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1

Operational information of a PTP clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockCurrentDSOffSetFromMaster The current value of the time difference between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.3 of IEEE1588-2008.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.1
tnPtpClockCurrentDSMeanPathDelay The mean propagation time between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.4 of IEEE1588-2008.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.2
tnPtpClockCurrentDSCurrentTime The current time of the PTP clock. ASCII encoded decimal number in units of seconds with a precision of 9.	OctetString Constraints: range: 81-81	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.3
tnPtpClockCurrentDSRecoveredClockState The synchronization state of the PTP clock.	AluWdmPtpRecoveredClockState Type Values: 0 unknown 1 freeRun 2 acquiring 3 phasetracking 4 holdover 5 locked	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.4
tnPtpClockCurrentDSLockedPtpPort The number or index of the PTP port where the PTP clock is locked to. This parameter together with the tnPtpClockIndex points to a row of the tnPtpPortDSConfigTable. It is meaningful fo OC-slave or BC. And for BC, it …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.5
tnPtpClockCurrentDSStepsRemoved The number of PTP clocks along the timing distribution path from the Grandmaster to the local PTP clock.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.6

This table provides information of the Parent
Data Set for an OC/BC PTP clock.  For TC (E2E
or P2P), this table is not available.

tnPtpClockParentDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1

Parent clock information of an OC/BC clock

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockParentDSIdentifier Identifier of the parent clock which the local PTP clock locks to. If a PTP clock locks to an external ToD input interface, it should be equal to: 1 - for 1pps/ToD interface #1 2 - for 1pps/ToD interface #2.	AluWdmPtpClockIdentifier Type Constraints: range: 8	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.1
tnPtpClockParentDSPortNum The PTP port number of the parent clock, via which the local PTP clock is synchronizing to the parent clock.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.2
tnPtpClockParentDSStats This is an indicator of whether the stats of the parent clock are collected by the local PTP clock.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.3
tnPtpClockParentDSOffsetScaledLogVariance The frequency offset scaled log variance of the parent clock (IEEE P1588-2008 Section 7.6.3).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.4
tnPtpClockParentDSPhaseChangeRate The phase change rate of the parent clock(IEEE P1588-2008 Section 7.6.3).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.5
tnPtpClockParentDSGrandmasterClockId The clock identifier of the grandmaster which the parent clock locks to.	AluWdmPtpClockIdentifier Type Constraints: range: 8	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.6
tnPtpClockParentDSGrandmasterClass The clock class of the grandmaster which the parent clock locks to.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.7
tnPtpClockParentDSGrandmasterAccuracy The accuracy of the grandmaster which the parent clock locks to.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.8
tnPtpClockParentDSGrandmasterOffsetScaledLogVariance The OffsetScaledLogVariance value of the grandmaster which the parent clock locks to.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.9
tnPtpClockParentDSGrandmasterPriority1 The priority1 value of the grandmaster which the parent clock locks to.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.10
tnPtpClockParentDSGrandmasterPriority2 The priority2 value of the grandmaster which the parent clock locks to.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.11

This table provides the information of the Time
Properties Data Set for an OC/BC PTP clock.  For
TC (E2E or P2P), this table is not available.

tnPtpClockTimePropertiesDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1

Time properties information of an OC/BC PTP clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockTimePropertiesDSCurrentUtcOffset The current UTC offset value. Refer to Section 8.2.4.2 of IEEE1588-2008. The unit is seconds.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.1
tnPtpClockTimePropertiesDSCurrentUtcOffsetValid This parameter indicates whether current UTC offset is valid or not. Refer to Section 8.2.4.3 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.2
tnPtpClockTimePropertiesDSLeap59 This parameter indicates whether the last minute of the current UTC day contains 59 seconds or not. Refer to Section 8.2.4.4 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.3
tnPtpClockTimePropertiesDSLeap61 This parameter indicates whether the last minute of the current UTC day contains 61 seconds or not. Refer to Section 8.2.4.5 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.4
tnPtpClockTimePropertiesDSTimeTraceable This parameter indicates whether the timescale or the current UTC offset are traceable to a primary reference or not. Refer to Section 8.2.4.6 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.5
tnPtpClockTimePropertiesDSFrequencyTraceable This parameter indicates whether the frequency determining the timescale is traceable to a primary reference or not. Refer to Section 8.2.4.7 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.6
tnPtpClockTimePropertiesDSPtpTimescale This parameter indicates the type of time scale of the grandmaster clock: true: PTP timescale false: ARB timescale Refer to Section 8.2.4.8 of IEEE1588-2008.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.7
tnPtpClockTimePropertiesDSPtpTimeSource This parameter indicates the timesource used by grandmaster clock: -0x10: ATOMIC_CLOCK -0x20: GPS -0x30: TEERESTRIAL_RADIO -0x40: PTP -0x50: NTP -0x60: HAND_SET -0x90: OTHER -0xA0: INTERNAL_OSCILLATOR Ref…	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.8
tnPtpClockTimePropertiesDSSyncUncertainFlag This parameter indicates if the SynchronizationUncertain flag of incoming announce message from the parent clock is TRUE or FALSE. It is valid only when the PTP profile is itug8275dot1 and the SyncUncertainMon is ENABL…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.9

This table provides tn PTP Clock Path Trace Data Set
for a PTP Clock.

tnPtpClockPathTraceDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1

Path Trace Data Set of a PTP Clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockPathTraceDSEnable Enable/Disable the Path Trace mechanism.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.1
tnPtpClockPathTraceDSList A list of ClockIdentity values. The length of one ClockIdentity is 8.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.7483.2.2.4.9.1.2.6.1.2

This table provides the PTP Clock
Sync OAM attributes.

tnPtpClockSyncOamEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1

PTP Clock Sync OAM attributes.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockRealtimeTimeOffsetDuration Duration time(minute) for the PTP Clock Realtime Time Offset. Range: 1 to 15 minutes.	MinuteUnsigned32r/w Constraints: range: 1-15	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.1
tnPtpClockRealtimeTimeOffsetInterval Interval time(second) for the PTP Clock Realtime Time Offset. Range: 1 to 5 seconds.	SecondUnsigned32r/w Constraints: range: 1-5	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.2
tnPtpClockRealtimeTimeOffset1 The PTP Clock Realtime Time Offset part 1. Every Time Offset value is an Integer32(4-byte). The maximum size of tnPtpClockRealtimeTimeOffset1, tnPtpClockRealtimeTimeOffset2, and tnPtpClockR…	OctetString Constraints: range: 0-1200	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.3
tnPtpClockRealtimeTimeOffset2 The PTP Clock Realtime Time Offset part 2. Refer to tnPtpClockRealtimeTimeOffset1.	OctetString Constraints: range: 0-1200	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.4
tnPtpClockRealtimeTimeOffset3 The PTP Clock Realtime Time Offset part 3. Refer to tnPtpClockRealtimeTimeOffset1.	OctetString Constraints: range: 0-1200	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.5
tnPtpClockSyncLossDetectionInterval The number of SYNC Interval to raise PtpClock SYNCLOSS alarm. Range: 2 to 255.	Unsigned32r/w Constraints: range: 2-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.6
tnPtpClockDelayRespLossDetectionInterval The number of DELAY_RESP Interval to raise PtpClock DELAYRESPLOSS alarm. Range: 2 to 255.	Unsigned32r/w Constraints: range: 2-255	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.7
tnPtpClockPtpInputDegradeThreshold The Threshold value to raise PtpClock PTPINPUTDEG alarm. For IEEE_1588_2008_CCSA profile, valid values are 6, 7, 8, 52, 187. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160,…	Unsigned32r/w Constraints: range: 6-248	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.8
tnPtpClockTimeErrorReferencePortIndex The Reference Input 1PPS/ToD port index for the PTP Time Error(PTERREF).	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.2.2.4.9.1.2.7.1.9

This table provides generic information for a PTP clock.

tnPtpClockGenericEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1

Generic information for a PTP clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpClockMode This parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clo…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.1
tnPtpClockAlmProfName ASAP (alarm severity assignment profile) Name for PTP clock.	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.2.2.4.9.1.2.8.1.2

This table provides the default data set of
Transparent Clock.
          
Refer to 8.3.2 transparentClockDefaultDS
data set member specifications.

tnPtpTransparentClockDefaultDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1

Default data set of Transparent Clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpTransparentClockDefaultDSClockIdentity The clockIdentity of the Transparent Clock.	AluWdmPtpClockIdentifier Type Constraints: range: 8	.1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.1
tnPtpTransparentClockDefaultDSNumberPorts The number of PTPPOTRs of the Transparent Clock.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.2
tnPtpTransparentClockDefaultDSDelayMechanism E2E(end-to-end) or P2P(peer-to-peer) Transparent Clock.	Enumerationr/w Enumerated Values: 1 e2e 2 p2p	.1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.3
tnPtpTransparentClockDefaultDSPrimaryDomain The domainNumber of the primary syntonization domain.	Unsigned32r/w Constraints: range: 24-43	.1.3.6.1.4.1.7483.2.2.4.9.1.2.9.1.4

This table provides the next available index
for a PTP port to be created in a PTP clock.

tnPtpPortNextIndexEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1

Next available index for a PTP port to be
created in a PTP clock.

Indexes

tnPtpClockIndex

Column	Syntax	OID
tnPtpPortNextIndex This parameter indicates the next available index for a PTP port to be created in a PTP clock, which will be used when the user wants to create a new row in tnPtpPortDSConfigTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1.1

This table provides configuration for a PTP port.

tnPtpPortDSConfigEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1

Configuration information concerning a PTP port.

Indexes

tnPtpClockIndex tnPtpPortDSPortIndex

Column	Syntax	OID
tnPtpPortDSPortIndex The value of tnPtpPortDSPortIndex uniquely identifies a PTP port in a PTP clock. It equals to the portNumber used in the PTP message. Refer to Section 7.5.2.3 of IEEE1588-2008.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1
tnPtpPortDSConfigAssociatedPhysicalPort The physical port which this PTP port is associated to. For the same physical port, it has the same value as 'ifIndex' of the card's port table.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2
tnPtpPortDSConfigVlanVID The VLAN-ID of the Vlan tag for the tx/rx PTP messages. It shall be within the range of [0,4094], 0 means untagged.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3
tnPtpPortDSConfigVlanTPID The TPID of the Vlan tag for the tx/rx PTP messages. It is valid when tnPtpPortDSConfigVlanVID is not 0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4
tnPtpPortDSConfigAnnoRxTimeout The administrative value for the number of timeouts for the announce message associated with the 1588 PTP reference/port. The total time in seconds to timeout is calculated by the tnPtpPortDSAnnoRxTimeout * 2 ^ tnPtpPo…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5
tnPtpPortDSConfigLogAnnoInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the announce message in this PTP port. Valid values: -4, -3, -2, -1, 0, 1, 2, 3, 4.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6
tnPtpPortDSConfigLogSyncInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the sync message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7
tnPtpPortDSConfigLogDelayReqInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the delay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8
tnPtpPortDSConfigLogMinPDelayReqInterval The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the pdelay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9
tnPtpPortDSConfigAdminStatus It is used for the user to administratively manage the PTP protocols on the PTP port 0: Disable 1: Enable 2: MT1 (maintenance state 1) 3: MT2 (maintenance state 2).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10
tnPtpPortDSConfigRole It is used for the user to set the role of the PTP port. It is valid for BC only. 0: Automatic 1: Slave 2: Master 3: Passive.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11
tnPtpPortDSConfigDelayMechanism The delay mechanism for the PTP port.	Enumerationr/w Enumerated Values: 1 e2e 2 p2p	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12
tnPtpPortDSConfigVersionNumber The protocol version to be supported in the PTP port.	Enumerationr/w Enumerated Values: 1 v1 2 v2	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13
tnPtpPortDSConfigAsymCorrection It allows the user to specify the correction delay for asymmetrical network path. Refer to Section 7.4.2 of IEEE1588-2008. Value range: {-100ms, +100ms}. The unit of this attribute shall …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14
tnPtpPortDSConfigTwoStepFlag This parameter determines if follow-up messaging will be used for this PTP port. true: If the port will use follow-up messaging false: If the port will not use follow-up messaging. Only f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15
tnPtpPortDSConfigEncapType The encapsulation type to transport PTP for the PTP port: 1: UDP/IPv4 per IEEE1588-2008 Annex D 2: UDP/IPv6 per IEEE1588-2008 Annex D 3: Ethernet per IEEE1588-2008 Annex F.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16
tnPtpPortDSConfigAddressingMode Indicates addressing mode of the PTP message in the PTP port: - 0: Multicast for all PTP messages - 1: Unicast for all PTP messages with the provisioned destination address. - 2: Hybrid mode. The Delay_Req and Dela…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17
tnPtpPortDSConfigUnicastForDelayReqdeprecated Indicates how the Delay_Req message is sent in the PTP port regarding the destination address. This parameter is valid only when tnPtpPortAddressingMode is Multicast true: The port sends the Delay_Req me…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18
tnPtpPortDSConfigUnicastNegotiation An administrative value indicating whether the unicast negotiation function is enabled or disabled for the PTP port. It is valid when tnPtpPortAddressingMode is Multicast. true: Unicast negotiation is e…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19
tnPtpPortDSConfigDestMac The unicast destination MAC address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 3 ) and (tnPtpPortAddressingMode == 1).	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20
tnPtpPortDSConfigDestIpAddrType The parameter indicates the IP address type for tnPtpPortDSConfigDestIpAddr.	InetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 16 dns	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21
tnPtpPortDSConfigDestIpAddr The unicast destination IPv4/IPv6 address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 1 or 2) and (tnPtpPortAddressingMode == 1).	InetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22
tnPtpPortDSConfigRowStatus The RowStatus of the PTP Port entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23
tnPtpPortDSConfigConnectedPtpioTimingPort The timing port of the PTPIO card which this PTP port is connected to. It has the same value as 'ifIndex' of the card's port table. To unconnect a PTP port from a PTPIO timing port, set this parameter to 0.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24
tnPtpPortDSConfigAutoLinkAsyMeasureTrigger The action to trigger automatic link asymmetry measurement. true - trigger automatic link asymmetry measurement false - no action.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25
tnPtpPortDSConfigNotSlave An administrative value indicating whether the ptp port can be placed in the SLAVE state.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26
tnPtpPortDSConfigLocalPriority The localPriority value of the PTP port.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27
tnPtpPortDSConfigAssociatedEntityType Indicates the Associated Entity Type of the PTP port. 0: N/A, NOT Applicable 1: Physical PORT 2: Service 3: ERP Ring	Unsigned32r/w Constraints: range: 0-3	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.28
tnPtpPortDSConfigAssociatedEntityID Indicates the Associated Entity ID(8-byte) of the PTP port. The first 4-byte is shelfId/slotId/0/0. The last 4-byte is portId or serviceId or ringId depends on tnPtpPortDSConfigAssociatedEntityType.	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.29
tnPtpPortDSConfigClearMsgCounter Clears the Message Counter of the PTP port. The 32-bit value is defined as below: +----------+----------------------------+ | 32 11 | 10 1 | +----------+-------------------------…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.30

This table contains non-configurable information
of a PTP port

tnPtpPortDSInfoEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1

Non-configurable information of a PTP port.

Indexes

tnPtpClockIndex tnPtpPortDSPortIndex

Column	Syntax	OID
tnPtpPortDSInfoPeerPathDelay It's an estimate of the current one-way propagation delay on the link attached to the PTP port. The unit is ns. This attribute is valid only when tnPtpPortDSConfigDelayMechanism = p2p.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.1
tnPtpPortDSInfoPortOperState The state of the PTP port.	AluWdmtnPtpPortState Type Values: 0 unknown 1 initializing 2 faulty 3 disabled 4 listening 5 premaster 6 master 7 passive 8 uncalibrated 9 slave 65537 masterOriented 65538 slaveOriented 65539 tcFaulty	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.2
tnPtpPortDSInfoNumOfSessionsdeprecated The parameter indicates the number of the active sessions of the PTP port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.3
tnPtpPortDSInfoAutoLinkAsyMeasureStatus The parameter indicates the state of the automatic measurement trigger. 0 - noTrigger 1 - inProgress 2 - successful 3 - noMsgReceived 4 - noMsgReceivedAfterSwap 5 - oswFailure 6 - unstable timestamps.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.4
tnPtpPortDSInfoMeasuredLinkAsymmetry The parameter indicates the measured delay asymmetry of the PTP port. It is valid only when tnPtpPortDSInfoAutoMeasureStatus = 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.5
tnPtpPortDSInfoAnnounceMsgTx Indicates the number of Announce packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.6
tnPtpPortDSInfoAnnounceMsgRx Indicates the number of Announce packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.7
tnPtpPortDSInfoSyncMsgTx Indicates the number of Sync packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.8
tnPtpPortDSInfoSyncMsgRx Indicates the number of Sync packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.9
tnPtpPortDSInfoDelayReqMsgTx Indicates the number of Delay Request packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.10
tnPtpPortDSInfoDelayReqMsgRx Indicates the number of Delay request packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.11
tnPtpPortDSInfoDelayRspMsgTx Indicates the number of Delay response packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.12
tnPtpPortDSInfoDelayRspMsgRx Indicates the number of Delay response packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.13
tnPtpPortDSInfoSignalingMsgTx Indicates the number of Signaling packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.14
tnPtpPortDSInfoSignalingMsgRx Indicates the number of Signaling packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.15
tnPtpPortDSInfoManagementMsgTx Indicates the number of Management packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.16
tnPtpPortDSInfoManagementMsgRx Indicates the number of Management packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.17
tnPtpPortDSInfoFollowUpMsgTx Indicates the number of FollowUp packets transmitted to this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.18
tnPtpPortDSInfoFollowUpMsgRx Indicates the number of FollowUp packets received from this port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.19
tnPtpPortDSInfoPhyPortMac The MAC address of the associated physical port.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.20

This table provides generic information for a PTP port.

tnPtpPortGenericEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1

Generic information for a PTP port.

Indexes

tnPtpClockIndex tnPtpPortDSPortIndex

Column	Syntax	OID
tnPtpPortAlmProfName ASAP(alarm severity assignment profile) Name for PTP port.	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.2.2.4.9.1.3.5.1.1

This table provides the data set of Transparent Clock
PTP port.
          
Refer to 8.3.3 transparentClockPortDS data set member
specifications.

tnPtpTransparentClockPortDSEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1

Data set of the PTP port of Transparent Clock.

Indexes

tnPtpClockIndex tnPtpPortDSPortIndex

Column	Syntax	OID
tnPtpTransparentClockPortDSPortIdentity The PortIdentity attribute of the PTP port.	AluWdmPtpPortIdentity Type Constraints: range: 10	.1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.1
tnPtpTransparentClockPortDSFaultyFlag The value shall be TRUE if the PTP port is faulty and FALSE if the PTP port is operating normally. The initialization value shall be FALSE.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.3.6.1.2

This table contains parameters of the external
1PPS/ToD interfaces.

tnPtpExtTodIfEntry row .1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1

Attributes of an external 1PPS&ToD interface.

Indexes

tnPtpExtTodIfIndex

Column	Syntax	OID
tnPtpExtTodIfIndex The index of the 1pps/ToD interface. It contains the shelf, slot and port number information and is equal to the ifIndex of the ifTable.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1
tnPtpExtTodIfDirection The direction of the 1PPS&ToD interface. 0: Input (to the node) 1: Output (from the node).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2
tnPtpExtTodSignalValid This parameter enables/disables the ToD signal of the 1PPS&ToD interface. true: The ToD signal is enabled. false: The ToD signal is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3
tnPtpExtTodIfPulseFormat The format for the 1PPS signal of the 1PPS&ToD interface. 0: 1 pulse per second 1: 1 pulse per minute 2: 1 pulse per hour.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4
tnPtpExtTodIfToDFormat The format for the ToD signal of the 1PPS&ToD interface 0: UBX 1: IRIG-B 2: IRIG-D 3: ITU-T This parameter is valid only when tnPtpExtTodSignalValid is true.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5
tnPtpExtTodIfCableCorrection The compensation value of the cable for the 1PPS&ToD interface. Value range: {-100ms, +100ms}. The unit of this attribute shall be ns and the steps of this attribute shall be 1ns.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6
tnPtpExtTodIfAdminStatus The Admin status of the 1PPS&ToD interface. 0: Disable 1: Enable.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7
tnPtpExtTodIf1ppsStatus The operational status of the 1PPS signal of the 1PPS&ToD interface. 1: Normal 2: Loss. This parameter is valid only when tnPtpExtTodIfDirection is input.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8
tnPtpExtTodIfToDStatus The operational status of the ToD signal of the 1PPS&ToD interface. 1: Normal 2: Degraded 3: Do Not used (default) 4: Loss 256: N/A - NotApplicable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9
tnPtpExtTodIfAdditionalInfo The additional information for the 1PPS&ToD interface.	OctetString Constraints: range: 0-48	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10
tnPtpExtCompensationMode This parameter determines the PTP Compensation mode. It is intended to be managed by the System Operator. 0: precalibrated mode 1: auto mode 2: manual mode	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11
tnPtpExtCompenAutoTestTrigger This parameter enables/disables Compensation AutoTest true: enabled Compensation AutoTest. false: disabled Compensation AutoTest.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12
tnPtpExtCompenManualValueIn The compensation manual value in for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13
tnPtpExtCompenManualValueOut The compensation manual value out for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14
tnPtpExtCompenMeasureStatus This parameter indicate the the status of automatical calibration measurement 0: noTrigger 1: inProgress 2: successful 2: failed.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15
tnPtpExtTodIfDegradeThreshold The Threshold value to raise ToD Degrade(TODDEG). For IEEE_1588_2008_CCSA profile, Range: 0 to 5; Default: 0. For G_8275_1 profile, valid values are 6, 7, 135, 140, 150, 160, 165, 248; Defa…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.16
tnPtpExtTodIfTodClockClass The ClockClass of the ToD signal with itu ToD message format type. Valid values are: 0..255: ClockClass 256: N/A - NotApplicable.	Unsigned32 Constraints: range: 0-256	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.17
tnPtpExtTodAlmProfName .	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.18