TROPIC-ACCESSPORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
62

tnAccessPortTable

table
.1.3.6.1.4.1.7483.2.2.4.1.2.1 · 1 row entry · 55 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnAccessPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ACCESSPORT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ACCESSPORT-MIB::tnAccessPortTable' 
The 1696R/1830 NE port table.
tnAccessPortEntry row .1.3.6.1.4.1.7483.2.2.4.1.2.1.1
The ports on a card.
Indexes
Column Syntax OID
tnAccessPortDescr
Access port description.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.1
tnAccessPortStatusLEDColor
The color of the status LED.
TROPIC-TCTropicLEDColorType
Type Values:
1unknown
2off
3red
4green
5orange
6blue
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.2
tnAccessPortStatusLEDState
The state of the status LED.
TROPIC-TCTropicLEDStateType
Type Values:
1unknown
2solid
3fastBlink
4slowBlink
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.3
tnAccessPortOperationalCapability
.
TROPIC-TCTropicOperationalCapabilityType
Type Values:
1disabled
2enabled
3partiallyEnabled
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.4
tnAccessPortStateQualifier
.
TROPIC-TCTropicStateQualifierType
Type Values:
0portRxFault
1portTxFault
2locked
3ains
4flt
5mea
6uas
7ueq
8abnormal
9reserved9
10mdlt
11noimp
12sdee
13mt
14sgeo
15faf
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.5
tnAccessPortFarEndAddress
Access port far end address.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.6
tnAccessPortFarEndIfIndex
Access port far end interface index.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.7
tnAccessPortFarEndType
Access port far end type.
Enumerationr/w
Enumerated Values:
1notConnected
2internal
3external
5interCompound
6cluster
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.8
tnAccessPortDirection
Access port direction. Setting the direction
to unidirectionalRx will turn off the Tx laser,
and suppress Tx alarms (including out Wavelength
Tracker alarms). Setting the direction to
unidirectionalTx will suppress Rx…
Enumerationr/w
Enumerated Values:
1bidirectional
2unidirectionalTx
3unidirectionalRx
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9
tnAccessPortAINS
If the user has set Port AINS to true, the port
admin state is set to up by the system.

If the port admin state has been set up or down,
Port AINS is set to false by the system, unless
the user had specif…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.10
tnAccessPortAINSDebounceTime
This attribute must be set in multiples of 60s.
It is equal to System AINS Debounce Time when
Port AINS Use System Default is true. Setting
the Port AINS Debounce Time and Port AINS Use
System Default to true in the sa…
secondsSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.11
tnAccessPortUsingSysAINSDebounceTime
Using System AINS Debounce Time. Sets with a
value of false are restricted. The network
operator must set Port AINS Debounce Time to
some valid value to disable the use of System
AINS Debounce Time. Setting the Port …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.12
tnAccessPortAINSDebounceTimeRemaining
Number of seconds until the Port AINS DebounceTime
expires. If Port AINS is false or Port AINS
Debounce Time is 0, the value of this attribute
will be 0.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.13
tnAccessPortIsDomainEdgePort
For discriminating between ports that are internal
to a network composed of 1830 and 1696R network
elements and the ports that are at the edge of the
network so that the user knows where it is correct
to terminate end-t…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.14
tnAccessPortFarEndAddressConnFrom
Access port far end address that points to this
port.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.15
tnAccessPortFarEndIfIndexConnFrom
Access port far end interface that points to
this port.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.16
tnAccessPortFarEndTypeConnFrom
Access port far end type.
Enumerationr/w
Enumerated Values:
1notConnected
2internal
3external
5interCompound
6cluster
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.17
tnAccessPortExtAmpIpAddressIn
The IP address of an external amplifier
connected to this port. This attribute is
applicable to the line port of an LD card
and is reserved for use with a RAMAN module.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.18
tnAccessPortExtAmpIpAddressOut
The IP address of an external amplifier
connected from this port. This attribute is
applicable to the line port of an LD card
and is reserved for use with an EDFA module.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.19
tnAccessPortWtocmConnLoss
The insertion loss between the LD card MON port
and the WTOCM input port.

Current configurable range: 0 to 1500.
mBSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.20
tnAccessPortWtocmConnAddress
LD card port connected to WTOCM input port in
transmit direction.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.21
tnAccessPortOppDirectionPortAddress
Address of opposite direction port when the TX
and RX directions are split between two ports.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.22
tnAccessPortIsValidInternalOTSXcEndpoint
Indicates if this is an end point of internal
OT cross connect.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.23
tnAccessPortWtDomainNumber
The numbered domain used for WT key selection
for add XCs to this port; applies to external
line facing ports.

Current configurable range: -1 to 19.
Integer32r/w
Constraints:
range: -1-19
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.24
tnAccessPortHasMpoConnector
Indicates if the logical port underlies a
multi-fiber connector.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.25
tnAccessPortMpoConnectorPortOutIfIndex
Provides the shelf/slot/port of the multi-fiber
connector interface corresponding to this
logical port in the out direction. Value of 0
indicates no MPO port.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.26
tnAccessPortMpoConnectorPortInIfIndex
Provides the shelf/slot/port of the multi-fiber
connector interface corresponding to this
logical port in the in direction. Value of 0
indicates no MPO port.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.27
tnAccessPortIsMpo
Indicates if the port is itself a MPO port.
Retrievable through SNMP for all ports,
managed and MPO.

True: The port is the port for the MPO
connector.
False: The port is not a port for a MPO
connector, it…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.28
tnAccessPortMonOcmConnAddress
Port monitored by input or connected from output.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.29
tnAccessPortAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.30
tnAccessPortmfcTemperature
The Ambient temperature applies to the
sensor port of the MultiFunctional card.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.31
tnAccessPortmfcNominalPressure
The nominal pressure applies to the
sensor port of the MultiFunctional card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.32
tnAccessPortmfcDifferentialPressure
The differential pressure applies to the
sensor port of the MultiFunctional card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.33
tnAccessFilterAmbientTemperature
Current Ambient Temperature.
CelsiusSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.34
tnAccessFilterPressure
Current Pressure Value.
PaSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.35
tnAccessFilterRecorded
Recorded calibration on clean filter.
PaSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.36
tnAccessFilterCalibrated
Recent filter calibration value.
PaSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.37
tnAccessFilterAltitude
Altitude used in above calibration.
kilometersSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.38
tnAccessFilterRecordTime
Recorded calibration time.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.39
tnAccessFilterCalibrateTime
Recent calibration time.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.40
tnAccessFilterScheduledTime
Next scheduled time for calibration.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.41
tnAccessPortL2FarEndIfIndex
Access port Layer 2 far end interface index.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.42
tnAccessPortL2FarEndMacAddress
Access port Layer 2 far end MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.43
tnAccessPortDirectionCapability
Access port direction capabilities.
Enumeration
Enumerated Values:
0notInstalled
1singleBidi
2dualBidi
3rxOnly
4txOnly
5rxAndTx
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.44
tnAccessPortCpriMappingType
Specifies the mapping type to map CPRI signals into
Ethernet packets.
tunneling - map CPRI 10B or 66B line codes
are encapsulted into RoE packets.
structureAware - map C…
Enumerationr/w
Enumerated Values:
6tunneling
7linecodeAware
8structureAware
9structureAwareControl
10nomapping
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.45
tnAccessPortFecType
Specifies the Forward Error Correction type on the
interface port. Enter this keyword without option to
display the current value. fectype = rsfec is allowed
only for 25gbe, 100gbe, CPRI-8, CPRI-10 with 64B/66B
line cod…
TROPIC-TCAluWdmFecModer/w
Type Values:
1noFec
2g709Fec
3enhancedFec
4uFec
5enhancedFec2
6aFec
7sdFecG2
10eSDFec
11hpFec
12usdFec
13bjFec
14scFec
15sdFecAcc
16eFEC
17rsFEC
18kp4FEC
19sFEC
20autoFEC
21sdFecCE
22sdFecV
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.46
tnAccessPortFecBypassInd
Parameter FecBypassInd (FEC Bypass Indication) determines
whether the corresponding option as defined in IEEE 802.3
is set or not.
If enabled, this implies:
- dHISER defect detection based on the number of RS-FEC
…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.47
tnAccessPortCpriRole
The master/slave role for CPRI interface.
Enumerationr/w
Enumerated Values:
1master
2slave
3none
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.48
tnAccessPortAseMode
.
Enumerationr/w
Enumerated Values:
1unconfigured
2noNoise
3low
4standard
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.49
tnAccessPortRole
.
Enumeration
Enumerated Values:
1undetermined
2in
3out
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.50
tnAccessPortFacilityDescriptorName
.
OctetStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.51
tnAccessPortFacilityDescriptorDesc
.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.52
tnAccessPortFacilityDescriptorCirId
.
OctetStringr/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.53
tnAccessPortAlienWavebank
.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.54
tnAccessPortModuleReset
.
Enumerationr/w
Enumerated Values:
1noCmd
2warmReset
3coldReset
4forceReset
 .1.3.6.1.4.1.7483.2.2.4.1.2.1.1.55

tnIfTable

table
.1.3.6.1.4.1.7483.2.2.4.1.2.2 · 1 row entry · 7 columns
Open in standard view
Uses the nokia variant from /opt/observium/mibs/nokia.
Command help
Walk tnIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TROPIC-ACCESSPORT-MIB' -M '/opt/observium/mibs/nokia:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TROPIC-ACCESSPORT-MIB::tnIfTable' 
.
tnIfEntry row .1.3.6.1.4.1.7483.2.2.4.1.2.2.1
.
Indexes
No indexes recorded
Column Syntax OID
tnIfPhysicalLocation
.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.1
tnIfType
In a set request, value default indicates that
the NE assigns the port automatically, if
possible. A value of default will not be
returned to the network operator. If tnIfType
is set to unassigned and ifAdminStatus ha…
TROPIC-TCAluWdmTnIfTyper/w
Type Values:
1unassigned
2default
3unknown
4oc3
5oc12
6oc48
7oc192
8ots
9och
10otu1
11otu2
12gige
13tenGige
14stm1
15stm4
16stm16
17stm64
18fc1g
19fc2g
20fc4g
21fc10g
22cbr2g5
23cbr10g
24anyRate
25hdSdi
26fe
27fddi
28esCon
29dvbAsi
30dvi6000
31otu3
32oc768
33stm256
34otu4
35fc8g
36hundredGige
37sdsdi
38e1
39sdi3g
40dcn
41evoa
42fee
43oduptf
44ds1
45otu3e2
46otu2e
47fortyGige
48sdr
49ddr
50tod
51lagGroup
52otl44
53fc16g
54qdr
55bits
56oneTru
57otu4x2
58otu1f
59cbr10g3
60fortyGigeMLD
61interLaken
62otl410
63otu4x4
64otu4Half
65otu4Halfx5
66sensor
67odu2
68odu2e
69odu3
70odu4
71xfi
72caui
73hundredGigeFec
74otu2ewaneth
75otu4waneth
76tengigelaneth
77hundredGigeLaneth
78gigeConv
79otu2eeth
80gigelaneth
81felaneth
82ethman
83oduflex
84ilkpif
85feed
86otu2eNimEth
87twentyFiveGbeLaneth
88otu4x2waneth
89otsi
90cpri3
91cpri5
92cpri6
93cpri7
94cpri8
95cpri10
96obsai8
97obsai4
98twentyFiveGbe
99fourHundredGige
100cauiV2
101fc32g
102otuc4mld
103equipment
104cpri4
105el1GbeLaneth
106tengigelaneth2g5ce
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.2
tnIfSupportedTypes
The supported types.
Bits
Enumerated Values:
0oc3
1oc12
2oc48
3oc192
4ots
5och
6otu1
7otu2
8gige
9tenGige
10stm1
11stm4
12stm16
13stm64
14fc1g
15fc2g
16fc4g
17fc10g
18cbr2g5
19cbr10g
20anyRate
21hdSdi
22fe
23fddi
24esCon
25dvbAsi
26dvi6000
27otu3
28oc768
29stm256
30otu4
31fc8g
32hundredGige
33sdsdi
34e1
35sdi3g
36dcn
37evoa
38fee
39oduptf
40ds1
41otu3e2
42otu2e
43fortyGige
44sdr
45ddr
46tod
47lagGroup
48otl44
49fc16g
50qdr
51bits
52oneTru
53otu4x2
54otu1f
55cbr10g3
56fortyGigeMLD
57interLaken
58otl410
59otu4x4
60otu4Half
61otu4Halfx5
62sensor
63xfi
64caui
65otu2ewaneth
66otu4waneth
67tengigelaneth
68hundredGigeLaneth
69gigeConv
70otu2eeth
71gigelaneth
72felaneth
73ethman
74ilkpif
75feed
76otu2eNimEth
77twentyFiveGbeLaneth
78otu4x2waneth
79otsi
80fourHundredGige
81cpri3
82cpri5
83cpri6
84cpri7
85cpri8
86cpri10
87obsai8
88obsai4
89tfgige
90cauiV2
91fc32g
92otuc4mld
93equipment
94cpri4
95tengigelaneth2g5ce
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.3
tnIfSupportedTypesAlternate
The supported types as an octet string.
OctetString
Constraints:
range: 8-8
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.4
tnIfForceAdminStatus
Setting this attribute to execute will force an
ifAdminStatus change. This works only for an
ifAdminStatus of down. When queried, this
attribute returns a value of noCmd.
TROPIC-TCTnCommandr/w
Type Values:
1noCmd
2execute
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.5
tnIfnumofTimeSlots
The number of time slot if tnIfType is oduflex. If
tnIfType is non-Oduflex, tnIfnumofTimeSlots is always
zero.
Unsigned32
Constraints:
range: 0-80
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.6
tnIfAlmProfName
.
OctetStringr/w
Constraints:
range: 1-40
 .1.3.6.1.4.1.7483.2.2.4.1.2.2.1.7