TRAPEZE-NETWORKS-AP-CONFIG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
235

trpzApConfApConfigTable

table
.1.3.6.1.4.1.14525.4.14.1.2 · 1 row entry · 32 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfApConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApConfigTable' 
A table describing all the APs currently configured
on this AC.
trpzApConfApConfigEntry row .1.3.6.1.4.1.14525.4.14.1.2.1
Configuration for a particular AP that could be attached to the AC.
Indexes
Column Syntax OID
trpzApConfApConfigApNum
The Number of this AP (administratively assigned).
TRAPEZE-NETWORKS-AP-TCTrpzApNum
Type Constraints:
range: 0..9999
 .1.3.6.1.4.1.14525.4.14.1.2.1.1
trpzApConfApConfigApAttachType
How this AP is attached to the AC
(directly or via L2/L3 network).
TRAPEZE-NETWORKS-AP-TCTrpzApAttachType
Type Values:
1directAttach
2networkAttach
 .1.3.6.1.4.1.14525.4.14.1.2.1.2
trpzApConfApConfigPhysPortNum
Identifies the physical port used to attach this AP.
Only valid for directly attached APs, otherwise will be zero.
TRAPEZE-NETWORKS-BASIC-TCTrpzPhysPortNumberOrZero
Type Constraints:
range: 0..1024
 .1.3.6.1.4.1.14525.4.14.1.2.1.3
trpzApConfApConfigApSerialNum
The Serial Number used to identify this AP.
Only valid for network attached APs,
otherwise will be a zero length string.
TRAPEZE-NETWORKS-AP-TCTrpzApSerialNum
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.14525.4.14.1.2.1.4
trpzApConfApConfigApModelName
The Model name of this AP.
OctetString
Constraints:
range: 0-24
 .1.3.6.1.4.1.14525.4.14.1.2.1.5
trpzApConfApConfigFingerprint
The RSA key fingerprint configured on this AP (binary value:
it is the MD5 hash of the public key of the RSA key pair).
For directly attached APs the fingerprint is a zero length string.
TRAPEZE-NETWORKS-AP-TCTrpzApFingerprint
Type Constraints:
range: 0
range: 16
 .1.3.6.1.4.1.14525.4.14.1.2.1.6
trpzApConfApConfigBias
Bias (high/low/sticky).
TRAPEZE-NETWORKS-AP-TCTrpzApBias
Type Values:
1high
2low
3sticky
 .1.3.6.1.4.1.14525.4.14.1.2.1.7
trpzApConfApConfigApTimeout
The communication timeout for this AP, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.2.1.8
trpzApConfApConfigApNamedeprecated
The configured Name for this AP.
Names longer than 16 characters will be truncated
(example: 'APNamelongerthan16chars' will be shown as
'APNamelongertha~').
Deprecated by trpzApConfApConfigApName2, which allow…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.14525.4.14.1.2.1.9
trpzApConfApConfigContact
The Contact information for this AP.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.2.1.10
trpzApConfApConfigLocation
The Location information for this AP.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.2.1.11
trpzApConfApConfigBlinkEnabled
Indicates whether the LED blink mode is enabled on this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.12
trpzApConfApConfigForceImageDownloadEnabled
Indicates whether this AP is forced to always download
an image from the AC upon boot.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.13
trpzApConfApConfigFirmwareUpgradeEnabled
Indicates whether automatic boot firmware upgrade
is enabled on this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.14
trpzApConfApConfigLocalSwitchingEnabled
Indicates whether local switching is enabled on this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.15
trpzApConfApConfigPowerMode
The mode in which this AP is supplying power to its radios.
TRAPEZE-NETWORKS-AP-TCTrpzApPowerMode
Type Values:
1auto
2high
 .1.3.6.1.4.1.14525.4.14.1.2.1.16
trpzApConfApConfigLedMode
LED Mode (auto/static/off).
TRAPEZE-NETWORKS-AP-TCTrpzApLedMode
Type Values:
1auto
2static
3off
 .1.3.6.1.4.1.14525.4.14.1.2.1.17
trpzApConfApConfigDescription
The configured Description for this AP.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.14525.4.14.1.2.1.18
trpzApConfApConfigLldpMode
LLDP Mode (tx/disabled).
TrpzApLldpMode
Type Values:
1disabled
2tx
 .1.3.6.1.4.1.14525.4.14.1.2.1.19
trpzApConfApConfigLldpMedEnabled
Indicates whether LLDP-MED is enabled for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.20
trpzApConfApConfigLldpMedExtPowerViaMdiTlvSelected
Indicates whether LLDP-MED Extended Power via MDI TLV
is selected for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.21
trpzApConfApConfigLldpMedInventoryTlvSelected
Indicates whether LLDP-MED Inventory TLV is selected for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.22
trpzApConfApConfigApTunnelEnabled
Indicates whether AP to AP tunnels are enabled for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.23
trpzApConfApConfigDataSecurityEnabled
Indicates whether Data Security is enabled for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.24
trpzApConfApConfigWanOutageModeEnabled
Indicates whether WAN Outage (remote) Mode is enabled
for this AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.25
trpzApConfApConfigWanOutageExtendedTimeout
The duration for which the AP can stay in WAN outage mode, in hours.
A value of zero means the AP can stay in outage mode indefinitely.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.2.1.26
trpzApConfApConfigWanOutageEvaluationPeriod
The AC connection Evaluation Period for APs in WAN Outage mode,
in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.2.1.27
trpzApConfApConfigRemoteSiteName
The name of the remote site that the AP is part of.
An empty string means that the AP is not part of any
remote site.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14525.4.14.1.2.1.28
trpzApConfApConfigPathMtu
The configured Maximum Transmission Unit (in bytes) for
communication between AP and AC.
The value 0 means that the MTU was not administratively configured.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.2.1.29
trpzApConfApConfigHighLatencyModeEnabled
Indicates whether the high-latency mode is enabled for the AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.30
trpzApConfApConfigApName2
The configured Name for this AP;
defaults to AP<Number> (examples: 'AP01', 'AP22', 'AP333', 'AP4444');
could have been changed from CLI to a meaningful name,
for example the location of the AP (example: 'MeetingRoom73')…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14525.4.14.1.2.1.31
trpzApConfApConfigCacheConfigEnabled
Indicates whether the configuration of the AP is
saved on the AP itself, so that it won't be lost after reboot.
To enable this setting, the AP must have outage mode enabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.2.1.32

trpzApConfRadioConfigTable

table
.1.3.6.1.4.1.14525.4.14.1.3 · 1 row entry · 14 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioConfigTable' 
A table describing the radios on all the APs
currently configured on this AC.
trpzApConfRadioConfigEntry row .1.3.6.1.4.1.14525.4.14.1.3.1
Configuration for a particular Radio on a particular AP
that could be attached to the AC.
Indexes
Column Syntax OID
trpzApConfRadioConfigApNum
The Number of the AP (administratively assigned).
TRAPEZE-NETWORKS-AP-TCTrpzApNum
Type Constraints:
range: 0..9999
 .1.3.6.1.4.1.14525.4.14.1.3.1.1
trpzApConfRadioConfigRadioIndex
The number of this Radio on the AP.
TRAPEZE-NETWORKS-AP-TCTrpzApRadioIndex
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.14525.4.14.1.3.1.2
trpzApConfRadioConfigRadioType
The configured Type of this radio
(typeA, typeB, typeG, typeNA, typeNG)
TRAPEZE-NETWORKS-AP-TCTrpzRadioType
Type Values:
1typeUnknown
2typeA
3typeB
4typeG
5typeNA
6typeNG
 .1.3.6.1.4.1.14525.4.14.1.3.1.3
trpzApConfRadioConfigRadioMode
The configured Mode of this radio (enabled/disabled/sentry)
TRAPEZE-NETWORKS-AP-TCTrpzRadioMode
Type Values:
1enabled
2disabled
3sentry
 .1.3.6.1.4.1.14525.4.14.1.3.1.4
trpzApConfRadioConfigRadioProfileNamedeprecated
Identifies the Radio Profile to be applied this radio,
by short name, as it appears in the legacy Radio Profile table
(trpzApConfRadioProfileTable).
Deprecated by trpzApConfRadioConfigRadioProfileName2,
which allows Rad…
TrpzRadioProfileName
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.14525.4.14.1.3.1.5
trpzApConfRadioConfigChannel
The configured Channel Number of this radio.
TRAPEZE-NETWORKS-AP-TCTrpzChannelNum
Type Constraints:
range: 1..1024
 .1.3.6.1.4.1.14525.4.14.1.3.1.6
trpzApConfRadioConfigTxPower
The configured Tx Power level of this radio.
TRAPEZE-NETWORKS-AP-TCTrpzPowerLevel .1.3.6.1.4.1.14525.4.14.1.3.1.7
trpzApConfRadioConfigAutoTuneMaxTxPowerobsolete
The Maximum Tx Power that Auto Tune is allowed
to set for this radio.
Obsoleted: not supported anymore.
TRAPEZE-NETWORKS-AP-TCTrpzPowerLevel .1.3.6.1.4.1.14525.4.14.1.3.1.8
trpzApConfRadioConfigAntennaType
The configured Antenna Type for this radio.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.14525.4.14.1.3.1.9
trpzApConfRadioConfigAntennaLocation
The configured Antenna Location for this radio.
TRAPEZE-NETWORKS-AP-TCTrpzRadioAntennaLocation
Type Values:
1indoors
2outdoors
 .1.3.6.1.4.1.14525.4.14.1.3.1.10
trpzApConfRadioConfigLoadBalancingEnabled
Indicates whether RF Load Balancing is enabled on this radio.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.3.1.11
trpzApConfRadioConfigLoadBalancingGroup
Indicates the RF Load Balancing group that
this radio is assigned to.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14525.4.14.1.3.1.12
trpzApConfRadioConfigLoadRebalancingEnabled
Indicates whether RF Load Rebalancing is enabled for this radio.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.3.1.13
trpzApConfRadioConfigRadioProfileName2
Identifies the Radio Profile to be applied to this radio.
Deprecates trpzApConfRadioConfigRadioProfileName.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14525.4.14.1.3.1.14

trpzApConfApTemplateConfigTable

table
.1.3.6.1.4.1.14525.4.14.1.4 · 1 row entry · 10 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfApTemplateConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateConfigTable' 
A table describing all the AP Templates currently configured
on this AC.
trpzApConfApTemplateConfigEntry row .1.3.6.1.4.1.14525.4.14.1.4.1
Template configuration for APs that could be attached to the AC.
Indexes
Column Syntax OID
trpzApConfApTemplConfApTemplateName
AP Template Name.
TrpzApTemplateName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.4.1.1
trpzApConfApTemplConfApTemplateEnabled
Indicates whether this AP Template is Enabled
(can be used for bringing up APs).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.4.1.2
trpzApConfApTemplConfBias
Bias (high/low/sticky).
TRAPEZE-NETWORKS-AP-TCTrpzApBias
Type Values:
1high
2low
3sticky
 .1.3.6.1.4.1.14525.4.14.1.4.1.3
trpzApConfApTemplConfApTimeout
The communication timeout for this AP Template, in seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.4.1.4
trpzApConfApTemplConfBlinkEnabled
Indicates whether the LED blink mode is enabled
on this AP Template.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.4.1.5
trpzApConfApTemplConfForceImageDownloadEnabled
Indicates whether this AP is forced to always download
an image from the AC upon boot.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.4.1.6
trpzApConfApTemplConfFirmwareUpgradeEnabled
Indicates whether automatic boot firmware upgrade
is enabled on this AP Template.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.4.1.7
trpzApConfApTemplConfLocalSwitchingEnabled
Indicates whether local switching is enabled
on this AP Template.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.4.1.8
trpzApConfApTemplConfPowerMode
The mode in which an AP using this Template
will be supplying power to its radios.
TRAPEZE-NETWORKS-AP-TCTrpzApPowerMode
Type Values:
1auto
2high
 .1.3.6.1.4.1.14525.4.14.1.4.1.9
trpzApConfApTemplConfLedMode
The LED Mode (auto/static/off)
for an AP using this Template.
TRAPEZE-NETWORKS-AP-TCTrpzApLedMode
Type Values:
1auto
2static
3off
 .1.3.6.1.4.1.14525.4.14.1.4.1.10

trpzApConfApTemplateRadioConfigTable

table
.1.3.6.1.4.1.14525.4.14.1.5 · 1 row entry · 9 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfApTemplateRadioConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfApTemplateRadioConfigTable' 
A table describing the radios for all the AP Templates
currently configured on this AC.
trpzApConfApTemplateRadioConfigEntry row .1.3.6.1.4.1.14525.4.14.1.5.1
Template configuration for a particular Radio index
on an AP Template configured on this AC.
Indexes
Column Syntax OID
trpzApConfApTemRadioConfApTemplateName
AP Template Name.
TrpzApTemplateName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.5.1.1
trpzApConfApTemRadioConfRadioIndex
The number of this Radio on the AP Template.
TRAPEZE-NETWORKS-AP-TCTrpzApRadioIndex
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.14525.4.14.1.5.1.2
trpzApConfApTemRadioConfRadioMode
The configured mode of a radio using this Template
(enabled/disabled/sentry)
TRAPEZE-NETWORKS-AP-TCTrpzRadioMode
Type Values:
1enabled
2disabled
3sentry
 .1.3.6.1.4.1.14525.4.14.1.5.1.3
trpzApConfApTemRadioConfRadioProfileNamedeprecated
Identifies the Radio Profile to be applied to a radio
using this Template, by short name, as it appears in the legacy
Radio Profile table (trpzApConfRadioProfileTable).
Deprecated by trpzApConfApTemRadioConfRadioProfile…
TrpzRadioProfileName
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.14525.4.14.1.5.1.4
trpzApConfApTemRadioConfAutoTuneMaxTxPowerobsolete
The Maximum Tx Power that Auto Tune will be allowed
to set for a radio using this Template.
Obsoleted: not supported anymore.
TRAPEZE-NETWORKS-AP-TCTrpzPowerLevel .1.3.6.1.4.1.14525.4.14.1.5.1.5
trpzApConfApTemRadioConfLoadBalancingEnabled
Indicates whether RF Load Balancing will be enabled
on a radio using this Template.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.5.1.6
trpzApConfApTemRadioConfLoadBalancingGroup
Indicates the RF Load Balancing group that
a radio using this Template will be assigned to.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.14525.4.14.1.5.1.7
trpzApConfApTemRadioConfLoadRebalancingEnabled
Indicates whether RF Load Rebalancing will be enabled
for a radio using this Template.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.5.1.8
trpzApConfApTemRadioConfRadioProfileName2
Identifies the Radio Profile to be applied
to a radio using this Template.
Deprecates trpzApConfApTemRadioConfRadioProfileName.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14525.4.14.1.5.1.9

trpzApConfRadioProfileTable

table deprecated
.1.3.6.1.4.1.14525.4.14.1.6 · 1 row entry · 41 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfileTable' 
A table describing the Radio Profiles
currently configured on this AC.
Deprecated by trpzApConfRadioProfile32Table, whose
index may be up to 32 characters long.
trpzApConfRadioProfileEntry row .1.3.6.1.4.1.14525.4.14.1.6.1
Configuration for a particular Radio Profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
Indexes
Column Syntax OID
trpzApConfRadioProfRadioProfileNamedeprecated
Name of this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
TrpzRadioProfileName
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.14525.4.14.1.6.1.1
trpzApConfRadioProfBeaconIntervaldeprecated
Beacon Interval, time in thousandths of a second,
for this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.2
trpzApConfRadioProfDtimIntervaldeprecated
The number of times after every beacon
that each AP radio in a radio profile sends a
delivery traffic indication map (DTIM),
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.3
trpzApConfRadioProfChannelWidth11nadeprecated
802.11n Channel Width for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
TRAPEZE-NETWORKS-AP-TCTrpzRadioChannelWidth
Type Values:
1channelWidth20MHz
2channelWidth40MHz
 .1.3.6.1.4.1.14525.4.14.1.6.1.4
trpzApConfRadioProfMaxTxLifetimedeprecated
The maximum transmit threshold for the
AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.5
trpzApConfRadioProfMaxRxLifetimedeprecated
The maximum receive threshold for the
AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.6
trpzApConfRadioProfRtsThresholddeprecated
The RTS threshold for the AP radios using
this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.7
trpzApConfRadioProfFragThresholddeprecated
The fragmentation threshold for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.8
trpzApConfRadioProfLongXmitPreambleEnableddeprecated
Indicates whether an 802.11b/g AP radio using
this radio profile transmits Long Preamble.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 charac…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.9
trpzApConfRadioProfCountermeasuresModedeprecated
Countermeasures Mode for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
TrpzRadioProfileCountermeasuresMode
Type Values:
1none
2all
3rogue
4configured
 .1.3.6.1.4.1.14525.4.14.1.6.1.10
trpzApConfRadioProfRFScanModedeprecated
RF Scanning Mode for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
TrpzRadioProfileRFScanMode
Type Values:
1active
2passive
 .1.3.6.1.4.1.14525.4.14.1.6.1.11
trpzApConfRadioProfRFScanChannelScopedeprecated
RF scanning Channel Scope for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
TrpzRadioProfileRFScanChannelScope
Type Values:
1operating
2regulatory
3all
 .1.3.6.1.4.1.14525.4.14.1.6.1.12
trpzApConfRadioProfRFScanCTSEnableddeprecated
Indicates whether the AP radios using this radio profile
send CTS To Self packet before going off channel.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may b…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.13
trpzApConfRadioProfAutoTune11aChannelRangeobsolete
The allowable 802.11a Channel Range used by Auto-Tune
for the AP radios using this radio profile.
Obsoleted: not supported anymore.
TrpzRadioProfileAutoTuneChannelRange
Type Values:
1all-bands
2lower-bands
 .1.3.6.1.4.1.14525.4.14.1.6.1.14
trpzApConfRadioProfAutoTuneIgnoreClientsEnabledobsolete
Indicates whether the AP radios using this radio profile
Ignore Client connections in Auto-Tune channel selections.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.15
trpzApConfRadioProfAutoTuneChannelEnabledobsolete
Indicates whether Channel Auto-Tuning
is enabled for the AP radios using this radio profile.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.16
trpzApConfRadioProfAutoTuneChannelHolddownIntervalobsolete
Minimum Interval (in seconds) between Channel changes
due to Auto-Tuning, for the AP radios using this radio profile.
Obsoleted: not supported anymore.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.17
trpzApConfRadioProfAutoTuneChannelChangeIntervalobsolete
The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Channel for the AP radios
using this radio profile.
Obsoleted: not supported anymore.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.18
trpzApConfRadioProfAutoTunePowerEnableddeprecated
Indicates whether Power Auto-Tuning is enabled
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 chara…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.19
trpzApConfRadioProfAutoTunePowerRampIntervaldeprecated
Minimum Interval (in seconds) between Power changes
due to Auto-Tuning, for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose in…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.20
trpzApConfRadioProfAutoTunePowerChangeIntervaldeprecated
The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Power for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32T…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.21
trpzApConfRadioProfFairQueuingEnableddeprecated
Indicates whether weighted Fair Queuing is enabled
for this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 characters long.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.22
trpzApConfRadioProfCacBackgroundACMandatorydeprecated
Indicates whether Admission Control for Background traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose in…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.23
trpzApConfRadioProfCacBackgroundMaxUtilizationdeprecated
Maximum admission control limit for Background traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.24
trpzApConfRadioProfCacBackgroundPolicingEnableddeprecated
Indicates that admission control Policing for
Background traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, who…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.25
trpzApConfRadioProfCacBestEffortACMandatorydeprecated
Indicates that Admission Control for Best Effort traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose inde…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.26
trpzApConfRadioProfCacBestEffortMaxUtilizationdeprecated
Maximum admission control limit for Best Effort traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up t…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.27
trpzApConfRadioProfCacBestEffortPolicingEnableddeprecated
Indicates that admission control Policing for
Best Effort traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, wh…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.28
trpzApConfRadioProfCacVideoACMandatorydeprecated
Indicates that Admission Control for Video traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.29
trpzApConfRadioProfCacVideoMaxUtilizationdeprecated
Maximum admission control limit for Video traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 c…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.30
trpzApConfRadioProfCacVideoPolicingEnableddeprecated
Indicates that admission control Policing for
Video traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose in…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.31
trpzApConfRadioProfCacVoiceACMandatorydeprecated
Indicates that Admission Control for Voice traffic
is Mandatory for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.32
trpzApConfRadioProfCacVoiceMaxUtilizationdeprecated
Maximum admission control limit for Voice traffic,
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 c…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.6.1.33
trpzApConfRadioProfCacVoicePolicingEnableddeprecated
Indicates that admission control Policing for
Voice traffic is enabled, for the AP radios
using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose in…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.34
trpzApConfRadioProfRfidTagEnableddeprecated
Indicates whether an AP radio using this radio profile
is enabled to function as location receivers in an AeroScout
Visibility System.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfi…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.35
trpzApConfRadioProfWmmPowerSaveEnableddeprecated
Indicates whether the AP radios using this radio profile
enable power save mode on WMM clients.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.36
trpzApConfRadioProfRateEnforcementEnableddeprecated
Indicates whether data rates are enforced for the AP radios
using this radio profile, which means
that a connecting client must transmit at one of the
mandatory or standard rates in order to associate
with the AP.
This …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.37
trpzApConfRadioProfDfsChannelsEnableddeprecated
Indicates that the AP radios using this radio profile
use DFS channels to meet regulatory requirements.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be u…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.38
trpzApConfRadioProfRFSpectralScanModeEnableddeprecated
Indicates whether Spectral Scanning Mode is enabled
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 32 …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.6.1.39
trpzApConfRadioProfRFSpectralScanPrioritydeprecated
The Priority when a Spectral Scan sample time arrives
for the AP radios using this radio profile.
This table (trpzApConfRadioProfileTable) has been deprecated
by trpzApConfRadioProfile32Table, whose index
may be up to 3…
TrpzRadioProfileRFSpectralScanPriority
Type Values:
1data-first
2scan-first
 .1.3.6.1.4.1.14525.4.14.1.6.1.40
trpzApConfRadioProfRadioProfileFullNamedeprecated
The full name of the Radio Profile.
Indicates the entry in the new Radio Profile table
(trpzApConfRadioProfile32Table).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14525.4.14.1.6.1.41

trpzApConfRadioProfServiceProfileTable

table deprecated
.1.3.6.1.4.1.14525.4.14.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProfServiceProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfServiceProfileTable' 
A table describing the currently configured connections
between Radio Profiles and Service Profiles.
Deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index.
trpzApConfRadioProfServiceProfileEntry row .1.3.6.1.4.1.14525.4.14.1.7.1
Connection between a Radio Profile and a Service Profile,
currently configured on the AC.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows…
Indexes
Column Syntax OID
trpzApConfRpServpRadioProfileNamedeprecated
Name of this Radio Profile.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profile Names in the index.
TrpzRadioProfileName
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.14525.4.14.1.7.1.1
trpzApConfRpServpServiceProfileNamedeprecated
Name of a Service Profile connected to
this Radio Profile.
This table (trpzApConfRadioProfServiceProfileTable) has been
deprecated by trpzApConfRadioProf32ServiceProfileTable,
which allows 32 characters long Radio Profi…
TrpzServiceProfileName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.7.1.2
trpzApConfRpServpRowStatusdeprecated
This object is used to create a new row or
delete an existing row in this table.

To create a row, set this object to 'createAndGo'.

To delete a row, set this object to 'destroy'.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14525.4.14.1.7.1.3

trpzApConfRadioProfSnoopFilterTable

table deprecated
.1.3.6.1.4.1.14525.4.14.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProfSnoopFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfSnoopFilterTable' 
A table describing the currently configured connections
between Radio Profiles and Snoop Filters.
Deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index.
trpzApConfRadioProfSnoopFilterEntry row .1.3.6.1.4.1.14525.4.14.1.8.1
Connection between a Radio Profile and a Snoop Filter,
currently configured on the AC.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 chara…
Indexes
Column Syntax OID
trpzApConfRpSnoopfRadioProfileNamedeprecated
Name of this Radio Profile.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names in the index.
TrpzRadioProfileName
Type Constraints:
range: 1..16
 .1.3.6.1.4.1.14525.4.14.1.8.1.1
trpzApConfRpSnoopfSnoopFilterNamedeprecated
Name of a Snoop Filter connected to
this Radio Profile.
This table (trpzApConfRadioProfSnoopFilterTable) has been
deprecated by trpzApConfRadioProf32SnoopFilterTable,
which allows 32 characters long Radio Profile Names …
TrpzSnoopFilterName
Type Constraints:
range: 1..15
 .1.3.6.1.4.1.14525.4.14.1.8.1.2
trpzApConfRpSnoopfRowStatusdeprecated
This object is used to create a new row or
delete an existing row in this table.

To create a row, set this object to 'createAndGo'.

To delete a row, set this object to 'destroy'.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14525.4.14.1.8.1.3

trpzApConfServiceProfileTable

table
.1.3.6.1.4.1.14525.4.14.1.9 · 1 row entry · 57 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfServiceProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfServiceProfileTable' 
A table describing the Service Profiles
currently configured on this AC.
trpzApConfServiceProfileEntry row .1.3.6.1.4.1.14525.4.14.1.9.1
Configuration for a particular Service Profile.
Indexes
Column Syntax OID
trpzApConfServProfServiceProfileName
Name of this service profile
TrpzServiceProfileName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.9.1.1
trpzApConfServProfSsidType
The type of this service profile (clear/crypto).
TrpzServiceProfileSsidType
Type Values:
1clear
2crypto
 .1.3.6.1.4.1.14525.4.14.1.9.1.2
trpzApConfServProfBeaconEnabled
Indicates whether beacons are enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.3
trpzApConfServProf11naMode
Indicates the 802.11n (na) mode for this service profile.
TrpzServiceProfile11nMode
Type Values:
1enable
2disable
3required
 .1.3.6.1.4.1.14525.4.14.1.9.1.4
trpzApConfServProf11ngMode
Indicates the 802.11n (ng) mode for this service profile.
TrpzServiceProfile11nMode
Type Values:
1enable
2disable
3required
 .1.3.6.1.4.1.14525.4.14.1.9.1.5
trpzApConfServProf11nShortGuardIntervalEnabled
Indicates whether short guard interval is enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.6
trpzApConfServProf11nFrameAggregation
Indicates the Frame Aggregation mode
for this service profile.
TrpzServiceProfile11nFrameAggregationType
Type Values:
1msdu
2mpdu
3all
4disable
 .1.3.6.1.4.1.14525.4.14.1.9.1.7
trpzApConfServProf11nMsduMaxLength
The maximum MSDU length for this service profile.
TrpzServiceProfile11nMsduMaxLength
Type Values:
1msdu-4k
2msdu-8k
 .1.3.6.1.4.1.14525.4.14.1.9.1.8
trpzApConfServProf11nMpduMaxLength
The maximum MPDU length for this service profile.
TrpzServiceProfile11nMpduMaxLength
Type Values:
1mpdu-8k
2mpdu-16k
3mpdu-32k
4mpdu-64k
 .1.3.6.1.4.1.14525.4.14.1.9.1.9
trpzApConfServProfAuthFallthru
The authentication type to be attempted for users who
do not match a 802.1X or MAC authentication rule,
for this service profile.
TrpzServiceProfileAuthFallthruType
Type Values:
1none
2web-auth
3web-aaa-portal
4last-resort
 .1.3.6.1.4.1.14525.4.14.1.9.1.10
trpzApConfServProfWebAAAForm
The custom login page that loads for WebAAA users,
for this service profile.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.14525.4.14.1.9.1.11
trpzApConfServProfSharedKeyAuthEnabled
Indicates whether shared-key authentication is enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.12
trpzApConfServProfWpaIeEnabled
Indicates whether WPA IE beaconing is enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.13
trpzApConfServProfWpaIeCipherTkipEnabled
Indicates whether TKIP cipher is advertised in WPA IE,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.14
trpzApConfServProfWpaIeCipherCcmpEnabled
Indicates whether CCMP cipher is advertised in WPA IE,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.15
trpzApConfServProfWpaIeCipherWep40Enabledobsolete
Indicates whether WEP-40 cipher is advertised in WPA IE,
for this service profile.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.16
trpzApConfServProfWpaIeCipherWep104Enabledobsolete
Indicates whether WEP-104 cipher is advertised in WPA IE,
for this service profile.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.17
trpzApConfServProfWpaIeAuthDot1xEnabled
Indicates whether 802.1X authentication is advertised
in WPA IE, for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.18
trpzApConfServProfWpaIeAuthPskEnabled
Indicates whether Pre-Shared Key authentication
is advertised in WPA IE, for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.19
trpzApConfServProfRsnIeEnabled
Indicates whether RSN IE beaconing is enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.20
trpzApConfServProfRsnIeCipherTkipEnabled
Indicates whether TKIP cipher is advertised in RSN IE,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.21
trpzApConfServProfRsnIeCipherCcmpEnabled
Indicates whether CCMP cipher is advertised in RSN IE,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.22
trpzApConfServProfRsnIeCipherWep40Enabledobsolete
Indicates whether WEP-40 cipher is advertised in RSN IE,
for this service profile.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.23
trpzApConfServProfRsnIeCipherWep104Enabledobsolete
Indicates whether WEP-104 cipher is advertised in RSN IE,
for this service profile.
Obsoleted: not supported anymore.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.24
trpzApConfServProfRsnIeAuthDot1xEnabled
Indicates whether 802.1X authentication is advertised
in RSN IE, for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.25
trpzApConfServProfRsnIeAuthPskEnabled
Indicates whether Pre-Shared Key authentication
is advertised in RSN IE, for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.26
trpzApConfServProfTkipMicCountermeasuresTime
Indicates the TKIP MIC countermeasures time in milliseconds
for this service profile.
This is the length of time that AP radios use
countermeasures if two Message Integrity Code (MIC)
failures occur within 60 seconds.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.27
trpzApConfServProfMaxBandwidthKbps
The bandwidth limit for this service profile,
in Kbits/second. A value of zero means unlimited.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.28
trpzApConfServProfCacMode
The Call Admission Control (CAC) mode,
for this service profile.
TrpzServiceProfileCacMode
Type Values:
1none
2session
3vendor
 .1.3.6.1.4.1.14525.4.14.1.9.1.29
trpzApConfServProfCacSessCount
The maximum number of active sessions a radio can have
when session-based CAC is enabled, for this service profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.30
trpzApConfServProfUserIdleTimeout
The number of seconds MSS has a session
available for a client not sending data and is not
responding to keepalives (idle-client probes). If
the timer expires, the client session is changed
to the Dissociated state, for…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.31
trpzApConfServProfIdleClientProbingEnabled
Indicates whether the AC radio sends
a unicast null-data frame to each client every 10 seconds,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.32
trpzApConfServProfShortRetryCount
The number of times a radio can send a short unicast frame
without receiving an acknowledgment,
for this service profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.33
trpzApConfServProfLongRetryCount
The number of times a radio can send a long unicast frame
without receiving an acknowledgment,
for this service profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.34
trpzApConfServProfProxyArpEnabled
Indicates whether proxy ARP is enabled
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.35
trpzApConfServProfDhcpRestrictEnabled
Indicates whether only DHCP traffic is allowed until
a newly associated client has been authenticated
and authorized, for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.36
trpzApConfServProfNoBroadcastEnabled
Indicates whether broadcast ARP and DHCP packets
are converted to unicast for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.37
trpzApConfServProfSygateOnDemandEnabled
Indicates whether Sygate On-Demand Manager
(SODA Manager) is enabled for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.38
trpzApConfServProfEnforceChecksEnabled
Indicates whether Enforcement of the SODA security checks
is enabled for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.39
trpzApConfServProfSodaRemediationAcl
Remediation page ACL to apply to the client when the
failure page is loaded, for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.40
trpzApConfServProfSodaSuccessPage
Success page that is displayed on the client when
a client successfully runs the checks
performed by the SODA agent, for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.41
trpzApConfServProfSodaFailurePage
Failure page that is displayed on the client when
the SODA agent checks fail, for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.42
trpzApConfServProfSodaLogoutPage
The page to load when a client closes the
SODA virtual desktop and logs out of the network,
for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.43
trpzApConfServProfSodaAgentDirectory
Specifies a different directory for the
SODA agent files used for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.44
trpzApConfServProfWebPortalSessionTimeout
Time interval, in seconds, for which a Web Portal
WebAAA session remains in the Deassociated state
before being terminated automatically,
for this service profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.45
trpzApConfServProfWebPortalAcl
Name of ACL used for filtering traffic for Web Portal
users during authentication, for this service profile.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.14525.4.14.1.9.1.46
trpzApConfServProfWebPortalLogoutEnabled
Indicates whether the Web Portal logout functionality
is enabled for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.47
trpzApConfServProfWebPortalLogoutUrl
Indicates the Web Portal Logout URL for this service profile.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.14525.4.14.1.9.1.48
trpzApConfServProfKeepInitialVlanEnabled
Indicates whether, after roaming, the user keeps
the VLAN assigned from the first connection,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.49
trpzApConfServProfMeshModeEnabled
Indicates whether wireless mesh between APs
is enabled for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.50
trpzApConfServProfBridgingEnabled
Indicates whether wireless bridging of traffic
between APs is enabled for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.51
trpzApConfServProfLoadBalanceExemptEnabled
Indicates whether this service profile is
exempted from load balancing.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.52
trpzApConfServProfM2UConversionEnabled
Indicates whether multicast IPv4 traffic on the wire
is converted to unicast traffic for the wireless clients,
for this service profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.53
trpzApConfServProfBackupSsidMode
Indicates the availability of backup SSIDs
at a remote site.
Backup SSIDs allow access to new clients
when central site outage occurs.
TrpzBackupSsidMode
Type Values:
1disabled
2outage-only
3dual
4always-on
 .1.3.6.1.4.1.14525.4.14.1.9.1.54
trpzApConfServProfBackupSsidTimeout
Indicates how many seconds the backup SSIDs at
a remote site will stay up after the outage ends.
Value 0 means that the backup SSIDs will stay up
indefinitely.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.9.1.55
trpzApConfServProfBackupSsidKeepClients
Indicates whether the existing client sessions
at a remote site will be kept or not when central site
outage occurs.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.9.1.56
trpzApConfServProfWebPortalLogoutForm
The custom logout page that will be displayed for
Web Portal users, for this service profile.
An empty string means that the default page will be displayed.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.14525.4.14.1.9.1.57

trpzApConfSnoopFilterTable

table
.1.3.6.1.4.1.14525.4.14.1.10 · 1 row entry · 4 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfSnoopFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopFilterTable' 
A table describing the Snoop Filters
currently configured on this AC.
trpzApConfSnoopFilterEntry row .1.3.6.1.4.1.14525.4.14.1.10.1
Configuration for a particular Snoop Filter.
Indexes
Column Syntax OID
trpzApConfSnoopFilterName
Name of this snoop filter.
TrpzSnoopFilterName
Type Constraints:
range: 1..15
 .1.3.6.1.4.1.14525.4.14.1.10.1.1
trpzApConfSnoopFilterEnabled
Indicates whether this snoop filter is enabled.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.10.1.2
trpzApConfSnoopFilterObserverAddrType
The address type of 'trpzApConfSnoopFilterObserverAddr'.
If no snoop observer is configured for a particular
filter, this object will return 'unknown(0)' for that
filter.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.14525.4.14.1.10.1.3
trpzApConfSnoopFilterObserverAddr
The IP address of the snoop observer.
If no observer is configured for a particular snoop filter,
this object will return an empty string for that filter.

The type of this address is specified in
'trpzApC…
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.14525.4.14.1.10.1.4

trpzApConfRadioSnoopFilterTable

table
.1.3.6.1.4.1.14525.4.14.1.11 · 1 row entry · 1 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioSnoopFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioSnoopFilterTable' 
A table describing the associations of Snoop Filters
with AP radios.
trpzApConfRadioSnoopFilterEntry row .1.3.6.1.4.1.14525.4.14.1.11.1
Multiple snoop filters can be associated with one AP radio.
A snoop filter can be associated with multiple AP radios.

A combination of an AP number, a radio number and
a filter name uniquely identifies the …
Indexes
Column Syntax OID
trpzApConfRadioSnoopFilterRowStatus
This object is used to create a new row or
delete an existing row in this table.

To create a row, set this object to 'createAndGo'.

To delete a row, set this object to 'destroy'.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14525.4.14.1.11.1.1

trpzApConfSnoopObserverTable

table
.1.3.6.1.4.1.14525.4.14.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfSnoopObserverTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfSnoopObserverTable' 
A table describing the snoop observers
currently configured on the AC.
Snoop observers are hosts where snooped packets
are sent.
trpzApConfSnoopObserverEntry row .1.3.6.1.4.1.14525.4.14.1.12.1
The configuration of a particular snoop observer.
Indexes
Column Syntax OID
trpzApConfSnoopObserverTargetAddrType
The address type of 'trpzApConfSnoopObserverTargetAddr'.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.14525.4.14.1.12.1.1
trpzApConfSnoopObserverTargetAddr
The IP address of the snoop observer.

The type of this address is specified in
'trpzApConfSnoopObserverTargetAddrType'.
OctetString
Constraints:
range: 16-16
range: 4-4
 .1.3.6.1.4.1.14525.4.14.1.12.1.2
trpzApConfSnoopObserverSnapLength
Indicates the maximum number of bytes from a filtered
packet to be encapsulated in TZSP and sent to the observer.
Value 0 means that the entire packet is copied and
sent to the observer.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.12.1.3
trpzApConfSnoopObserverInterval
Indicates the snooping interval, in milliseconds,
for the packets with the same source.
Value 0 means no rate limit.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.12.1.4
trpzApConfSnoopObserverTxMode
The mode of transmission of snoop packets
to this observer.
TrpzSnoopObserverTxMode
Type Values:
1tzsp
2batched-tzsp
 .1.3.6.1.4.1.14525.4.14.1.12.1.5

trpzApConfRemoteSiteTable

table
.1.3.6.1.4.1.14525.4.14.1.13 · 1 row entry · 15 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRemoteSiteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRemoteSiteTable' 
A table describing the remote sites
currently configured on the AC.
          
A remote site is a group of APs situated in the same
location (site/branch), other than the location
of the controller.
trpzApConfRemoteSiteEntry row .1.3.6.1.4.1.14525.4.14.1.13.1
Description of a remote site
currently configured on the AC.
Indexes
Column Syntax OID
trpzApConfRemoteSiteName
The name of the remote site.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.14525.4.14.1.13.1.1
trpzApConfRemoteSiteCountryCode
Indicates the country code used for the configuration
of the APs at the remote site.
The system country code is used by default, in which case
this object will return the special value 'NONE'.
OctetString
Constraints:
range: 4-4
range: 2-2
 .1.3.6.1.4.1.14525.4.14.1.13.1.2
trpzApConfRemoteSitePathMtu
The configured MTU between the APs at the remote site
and the ACs at the central site.
The value 0 means that the MTU was not administratively configured.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.13.1.3
trpzApConfRemoteSiteBackupSsidsEnabled
Indicates whether the backup SSIDs at this remote site
are enabled or not.
Backup SSIDs allow access to new clients
when central site outage occurs.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.13.1.4
trpzApConfRemoteSiteLogServerEnabled
Indicates whether the APs at the remote site
will send syslog messages to a log server.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.13.1.5
trpzApConfRemoteSiteLogServerAddrType
The address type of 'trpzApConfRemoteSiteLogServerAddr'.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.14525.4.14.1.13.1.6
trpzApConfRemoteSiteLogServerAddr
The address of the log server used by the APs
in the remote site.
The type of this address is specified in
'trpzApConfRemoteSiteLogServerAddrType'.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.14525.4.14.1.13.1.7
trpzApConfRemoteSiteLogServerPort
The port number of the log server used by the APs
in the remote site.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.14525.4.14.1.13.1.8
trpzApConfRemoteSiteLogServerSeverity
The minimum severity of the messages sent
by the APs in the remote site to the syslog server.
TRAPEZE-NETWORKS-EXTERNAL-SERVER-TCTrpzSyslogSeverity
Type Values:
1emergency
2alert
3critical
4error
5warning
6notice
7informational
8debug
 .1.3.6.1.4.1.14525.4.14.1.13.1.9
trpzApConfRemoteSiteAcPollingEnabled
Indicates whether the AC can poll the APs in this remote site
to obtain full information about the AP-managed client sessions.
When it is 'false(2)', the AC has limited information
about the AP-managed sessions in this …
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.13.1.10
trpzApConfRemoteSiteRadiusServerGroupName
Indicates the name of the group of RADIUS servers
used in the remote site.
An empty string means that no RADIUS server group
has been configured for the remote site.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.14525.4.14.1.13.1.11
trpzApConfRemoteSiteRadiusDeadtime
The deadtime value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual deadtime values
of each server in the server group.
If RADIUS deadtime is not configured for t…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.13.1.12
trpzApConfRemoteSiteRadiusTimeout
The timeout value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual timeout values
of each server in the server group.
If RADIUS timeout is not configured for this…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.13.1.13
trpzApConfRemoteSiteRadiusRetransmit
The retransmit value configured for the RADIUS server group
of this remote site.
This value has precedence over the individual retransmit values
of each server in the server group.
If RADIUS retransmit is not configured…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.13.1.14
trpzApConfRemoteSiteRadiusNasIdType
The NAS-ID type configured for the RADIUS server group
of this remote site.
TrpzApRadiusNasIdType
Type Values:
1ap-name
2ap-serial-id
 .1.3.6.1.4.1.14525.4.14.1.13.1.15

trpzApConfRadioProfile32Table

table
.1.3.6.1.4.1.14525.4.14.1.14 · 1 row entry · 35 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProfile32Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProfile32Table' 
A table describing the Radio Profiles
currently configured on this AC.
Deprecates trpzApConfRadioProfileTable.
trpzApConfRadioProfile32Entry row .1.3.6.1.4.1.14525.4.14.1.14.1
Configuration for a particular Radio Profile.
Indexes
Column Syntax OID
trpzApConfRadioProf32RadioProfileName
Name of this radio profile.
TrpzRadioProfileName32
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.14.1.1
trpzApConfRadioProf32BeaconInterval
Beacon Interval, time in thousandths of a second,
for this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.2
trpzApConfRadioProf32DtimInterval
The number of times after every beacon
that each AP radio in a radio profile sends a
delivery traffic indication map (DTIM),
for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.3
trpzApConfRadioProf32ChannelWidth11na
802.11n Channel Width for the AP radios
using this radio profile.
TRAPEZE-NETWORKS-AP-TCTrpzRadioChannelWidth
Type Values:
1channelWidth20MHz
2channelWidth40MHz
 .1.3.6.1.4.1.14525.4.14.1.14.1.4
trpzApConfRadioProf32MaxTxLifetime
The maximum transmit threshold for the
AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.5
trpzApConfRadioProf32MaxRxLifetime
The maximum receive threshold for the
AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.6
trpzApConfRadioProf32RtsThreshold
The RTS threshold for the AP radios using
this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.7
trpzApConfRadioProf32FragThreshold
The fragmentation threshold for the AP radios
using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.8
trpzApConfRadioProf32LongXmitPreambleEnabled
Indicates whether an 802.11b/g AP radio using
this radio profile transmits Long Preamble.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.9
trpzApConfRadioProf32CountermeasuresMode
Countermeasures Mode for the AP radios
using this radio profile.
TrpzRadioProfileCountermeasuresMode
Type Values:
1none
2all
3rogue
4configured
 .1.3.6.1.4.1.14525.4.14.1.14.1.10
trpzApConfRadioProf32RFScanMode
RF Scanning Mode for the AP radios
using this radio profile.
TrpzRadioProfileRFScanMode
Type Values:
1active
2passive
 .1.3.6.1.4.1.14525.4.14.1.14.1.11
trpzApConfRadioProf32RFScanChannelScope
RF scanning Channel Scope for the AP radios
using this radio profile.
TrpzRadioProfileRFScanChannelScope
Type Values:
1operating
2regulatory
3all
 .1.3.6.1.4.1.14525.4.14.1.14.1.12
trpzApConfRadioProf32RFScanCTSEnabled
Indicates whether the AP radios using this radio profile
send CTS To Self packet before going off channel.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.13
trpzApConfRadioProf32AutoTunePowerEnabled
Indicates whether Power Auto-Tuning is enabled
for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.14
trpzApConfRadioProf32AutoTunePowerRampInterval
Minimum Interval (in seconds) between Power changes
due to Auto-Tuning, for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.15
trpzApConfRadioProf32AutoTunePowerChangeInterval
The interval (in seconds) at which RF Auto-Tuning
decides whether to Change the Power for the AP radios
using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.16
trpzApConfRadioProf32FairQueuingEnabled
Indicates whether weighted Fair Queuing is enabled
for this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.17
trpzApConfRadioProf32CacBackgroundACMandatory
Indicates whether Admission Control for Background traffic
is Mandatory for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.18
trpzApConfRadioProf32CacBackgroundMaxUtilization
Maximum admission control limit for Background traffic,
for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.19
trpzApConfRadioProf32CacBackgroundPolicingEnabled
Indicates that admission control Policing for
Background traffic is enabled, for the AP radios
using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.20
trpzApConfRadioProf32CacBestEffortACMandatory
Indicates that Admission Control for Best Effort traffic
is Mandatory for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.21
trpzApConfRadioProf32CacBestEffortMaxUtilization
Maximum admission control limit for Best Effort traffic,
for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.22
trpzApConfRadioProf32CacBestEffortPolicingEnabled
Indicates that admission control Policing for
Best Effort traffic is enabled, for the AP radios
using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.23
trpzApConfRadioProf32CacVideoACMandatory
Indicates that Admission Control for Video traffic
is Mandatory for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.24
trpzApConfRadioProf32CacVideoMaxUtilization
Maximum admission control limit for Video traffic,
for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.25
trpzApConfRadioProf32CacVideoPolicingEnabled
Indicates that admission control Policing for
Video traffic is enabled, for the AP radios
using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.26
trpzApConfRadioProf32CacVoiceACMandatory
Indicates that Admission Control for Voice traffic
is Mandatory for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.27
trpzApConfRadioProf32CacVoiceMaxUtilization
Maximum admission control limit for Voice traffic,
for the AP radios using this radio profile.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.14525.4.14.1.14.1.28
trpzApConfRadioProf32CacVoicePolicingEnabled
Indicates that admission control Policing for
Voice traffic is enabled, for the AP radios
using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.29
trpzApConfRadioProf32RfidTagEnabled
Indicates whether an AP radio using this radio profile
is enabled to function as location receivers in an AeroScout
Visibility System.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.30
trpzApConfRadioProf32WmmPowerSaveEnabled
Indicates whether the AP radios using this radio profile
enable power save mode on WMM clients.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.31
trpzApConfRadioProf32RateEnforcementEnabled
Indicates whether data rates are enforced for the AP radios
using this radio profile, which means
that a connecting client must transmit at one of the
mandatory or standard rates in order to associate
with the AP.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.32
trpzApConfRadioProf32DfsChannelsEnabled
Indicates that the AP radios using this radio profile
use DFS channels to meet regulatory requirements.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.33
trpzApConfRadioProf32RFSpectralScanModeEnabled
Indicates whether Spectral Scanning Mode is enabled
for the AP radios using this radio profile.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.14525.4.14.1.14.1.34
trpzApConfRadioProf32RFSpectralScanPriority
The Priority when a Spectral Scan sample time arrives
for the AP radios using this radio profile.
TrpzRadioProfileRFSpectralScanPriority
Type Values:
1data-first
2scan-first
 .1.3.6.1.4.1.14525.4.14.1.14.1.35

trpzApConfRadioProf32ServiceProfileTable

table
.1.3.6.1.4.1.14525.4.14.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProf32ServiceProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32ServiceProfileTable' 
A table describing the currently configured connections
between Radio Profiles and Service Profiles.
Deprecates trpzApConfRadioProfServiceProfileTable.
trpzApConfRadioProf32ServiceProfileEntry row .1.3.6.1.4.1.14525.4.14.1.15.1
Connection between a Radio Profile and a Service Profile,
currently configured on the AC.
Indexes
Column Syntax OID
trpzApConfRp32ServpRadioProfileName
Name of this Radio Profile.
TrpzRadioProfileName32
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.15.1.1
trpzApConfRp32ServpServiceProfileName
Name of a Service Profile connected to
this Radio Profile.
TrpzServiceProfileName
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.15.1.2
trpzApConfRp32ServpRowStatus
This object is used to create a new row or
delete an existing row in this table.

To create a row, set this object to 'createAndGo'.

To delete a row, set this object to 'destroy'.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14525.4.14.1.15.1.3

trpzApConfRadioProf32SnoopFilterTable

table
.1.3.6.1.4.1.14525.4.14.1.16 · 1 row entry · 3 columns
Open in standard view
Uses the trapeze variant from /opt/observium/mibs/trapeze.
Command help
Walk trpzApConfRadioProf32SnoopFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TRAPEZE-NETWORKS-AP-CONFIG-MIB' -M '/opt/observium/mibs/trapeze:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TRAPEZE-NETWORKS-AP-CONFIG-MIB::trpzApConfRadioProf32SnoopFilterTable' 
A table describing the currently configured connections
between Radio Profiles and Snoop Filters.
Deprecates trpzApConfRadioProfSnoopFilterTable.
trpzApConfRadioProf32SnoopFilterEntry row .1.3.6.1.4.1.14525.4.14.1.16.1
Connection between a Radio Profile and a Snoop Filter,
currently configured on the AC.
Indexes
Column Syntax OID
trpzApConfRp32SnoopfRadioProfileName
Name of this Radio Profile.
TrpzRadioProfileName32
Type Constraints:
range: 1..32
 .1.3.6.1.4.1.14525.4.14.1.16.1.1
trpzApConfRp32SnoopfSnoopFilterName
Name of a Snoop Filter connected to
this Radio Profile.
TrpzSnoopFilterName
Type Constraints:
range: 1..15
 .1.3.6.1.4.1.14525.4.14.1.16.1.2
trpzApConfRp32SnoopfRowStatus
This object is used to create a new row or
delete an existing row in this table.

To create a row, set this object to 'createAndGo'.

To delete a row, set this object to 'destroy'.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.14525.4.14.1.16.1.3