TPLINK-VOICEVLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

voiceVlanPortTable

table
.1.3.6.1.4.1.11863.6.19.1.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk voiceVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-VOICEVLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-VOICEVLAN-MIB::voiceVlanPortTable' 
Here you can configure the parameters of the ports in the voice VLAN..
voiceVlanPortEntry row .1.3.6.1.4.1.11863.6.19.1.2.1.1
An entry contains of the information of port param.
Indexes
Column Syntax OID
voiceVlanPortNumber
Displays the port number of the Switch.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.19.1.2.1.1.1
voiceVlanPortMode
Select the mode for the port to join the voice VLAN.
0. manual: In this mode, you can manually add a port to the
voice VLAN or remove a port from the voice VLAN
1. auto: In this mode, the switch automatically adds a po…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.19.1.2.1.1.2
voiceVlanPortStatus
Displays the state of the port in the current voice VLAN.
0. inactive
1. active
Enumeration
Enumerated Values:
0down
1up
 .1.3.6.1.4.1.11863.6.19.1.2.1.1.3
voiceVlanPortLag
Displays the LAG number which the port belongs to.
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.11863.6.19.1.2.1.1.4

voiceVlanOuiConfigTable

table
.1.3.6.1.4.1.11863.6.19.1.3.1 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk voiceVlanOuiConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-VOICEVLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-VOICEVLAN-MIB::voiceVlanOuiConfigTable' 
The switch determines whether a received packet is a voice 
packet by checking its source MAC address. If the source 
MAC addresses of packets comply with the OUI (organizationally 
unique identifier) addresses configured by the system, the packets 
are recognized as voice packets and transmitted in voice VLAN.
voiceVlanOuiConfigEntry row .1.3.6.1.4.1.11863.6.19.1.3.1.1
An entry contains of the information of a voice vlan oui.
Indexes
Column Syntax OID
voiceVlanOui
Enter the OUI address of the voice device.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.19.1.3.1.1.1
voiceVlanDescription
Give a description to the OUI for identification,1-16 characters.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.19.1.3.1.1.2
voiceVlanRowStatus
the following two values are states:
these values may be read or written
active(1),
notInService(2),

the following value is a state:
this value may be read, but not written
notReady(3),

the…
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.19.1.3.1.1.3