TPLINK-USERSECURITY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
25

userSecurityUserAuthPortTable

table
.1.3.6.1.4.1.11863.6.41.1.1.2.2 · 1 row entry · 8 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk userSecurityUserAuthPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-USERSECURITY-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-USERSECURITY-MIB::userSecurityUserAuthPortTable' 
A list of Port.
userSecurityUserAuthPortEntry row .1.3.6.1.4.1.11863.6.41.1.1.2.2.1
An entry contains of the port for user authentication .
Indexes
userSecurityUserAuthIndex
Column Syntax OID
userSecurityUserAuthPortIndex
Port entry ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.1
userSecurityUserAuthPortAccessSnmp
0. disable -- SNMP frame sent to the switch will be accepted by default
1. enable -- SNMP frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.2
userSecurityUserAuthPortAccessTelnet
0. disable -- Telnet frame sent to the switch will be accepted by default
1. enable -- Telnet frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.3
userSecurityUserAuthPortAccessSsh
0. disable -- SSH frame sent to the switch will be accepted by default
1. enable -- SSH frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.4
userSecurityUserAuthPortAccessHttp
0. disable -- HTTP frame sent to the switch will be accepted by default
1. enable -- HTTP frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.5
userSecurityUserAuthPortAccessHttps
0. disable -- HTTPS frame sent to the switch will be accepted by default
1. enable -- HTTPS frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.6
userSecurityUserAuthPortAccessPing
0. disable -- Ping request frame sent to the switch will be accepted by default
1. enable -- Ping request frame sent to the switch will be accepted only if it comes from the auth port(s)
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.7
userSecurityUserAuthPortConf
A list of port.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.41.1.1.2.2.1.8

userSecurityUserAuthIpTable

table
.1.3.6.1.4.1.11863.6.41.1.1.3.2 · 1 row entry · 9 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk userSecurityUserAuthIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-USERSECURITY-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-USERSECURITY-MIB::userSecurityUserAuthIpTable' 
A list of IP.
userSecurityUserAuthIpEntry row .1.3.6.1.4.1.11863.6.41.1.1.3.2.1
An entry contains of the IP for user authentication .
Indexes
userSecurityUserAuthIndex
Column Syntax OID
userSecurityUserAuthIpIndex
IP entry ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.1
userSecurityUserAuthIpAccessSnmp
0. disable -- SNMP frame sent to the switch will be accepted by default
1.enable -- SNMP frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.2
userSecurityUserAuthIpAccessTelnet
0. disable -- Telnet frame sent to the switch will be accepted by default
1.enable -- Telnet frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.3
userSecurityUserAuthIpAccessSsh
0. disable -- SSH frame sent to the switch will be accepted by default
1.enable -- SSH frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.4
userSecurityUserAuthIpAccessHttp
0. disable -- HTTP frame sent to the switch will be accepted by default
1.enable -- HTTP frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.5
userSecurityUserAuthIpAccessHttps
0. disable -- HTTPS frame sent to the switch will be accepted by default
1.enable -- HTTPS frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.6
userSecurityUserAuthIpAccessPing
0. disable -- Ping request frame sent to the switch will be accepted by default
1.enable -- Ping request frame sent to the switch will be accepted only if its source ip is in the same network segment with auth ip
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.7
userSecurityUserAuthIpAddress
the auth ip address.for example: 192.168.0.1
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.8
userSecurityUserAuthIpMask
the subnet mask of the auth ip address.for example: 255.255.255.0
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11863.6.41.1.1.3.2.1.9

userSecurityUserAuthMacTable

table
.1.3.6.1.4.1.11863.6.41.1.1.4.2 · 1 row entry · 8 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk userSecurityUserAuthMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-USERSECURITY-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-USERSECURITY-MIB::userSecurityUserAuthMacTable' 
A list of Mac.
userSecurityUserAuthMacEntry row .1.3.6.1.4.1.11863.6.41.1.1.4.2.1
An entry contains of the Mac for user authentication .
Indexes
userSecurityUserAuthIndex
Column Syntax OID
userSecurityUserAuthMacIndex
Mac entry ID
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.1
userSecurityUserAuthMacAccessSnmp
0. disable -- SNMP frame sent to the switch will be accepted by default
1.enable -- SNMP frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.2
userSecurityUserAuthMacAccessTelnet
0. disable -- Telnet frame sent to the switch will be accepted by default
1.enable -- Telnet frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.3
userSecurityUserAuthMacAccessSsh
0. disable -- SSH frame sent to the switch will be accepted by default
1.enable -- SSH frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.4
userSecurityUserAuthMacAccessHttp
0. disable -- HTTP frame sent to the switch will be accepted by default
1.enable -- HTTP frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.5
userSecurityUserAuthMacAccessHttps
0. disable -- HTTPS frame sent to the switch will be accepted by default
1.enable -- HTTPS frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.6
userSecurityUserAuthMacAccessPing
0. disable -- Ping request frame sent to the switch will be accepted by default
1.enable -- Ping request frame sent to the switch will be accepted only if its source mac is auth mac
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.7
userSecurityUserAuthMacAddress
the auth mac
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.41.1.1.4.2.1.8