TPLINK-SNMPNOTIFICATIONHOST-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
11

tpSnmpNotificationHostTable

table
.1.3.6.1.4.1.11863.6.32.1.1.1 · 1 row entry · 11 columns
Open in standard view 
A list of SNMP notification host control entries, supports IPV6.
tpSnmpNotificationHostEntry entry .1.3.6.1.4.1.11863.6.32.1.1.1.1
With the Notification function enabled, the switch
can initiatively report to the management station
about the important events that occur on the Views,
which allows the management station to monitor and
process the…
Indexes
tpSnmpNotificationHostIndex
Column Syntax OID
tpSnmpNotificationHostIndex
The index to the conceptual row of the table.
Negative numbers are not allowed. There
are objects defined that point to conceptual
rows of this table with this index value.
Zero is used to denote that no corresponding
…
Integer32
Constraints:
range: 0-12
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.1
tpSnmpNotificationHostIpMode
The type of IP address.Type is IPv4 or IPv6
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.2
tpSnmpNotificationHostIpAddr
IP Address of the management Host. Just input like a string.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.3
tpSnmpNotificationHostUserName
The User name of the management station.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.4
tpSnmpNotificationHostUDPPort
The number of the UDP port used to send notifications.
The UDP port functions with the IP address for the
notification sending. The default is 162.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.5
tpSnmpNotificationHostSecMode
The Security Model of the management station.
v1(1),SNMPv1 is defined for the notify.
v2c(2),SNMPv2c is defined for the notify.
v3(3),SNMPv3 is defined for the notify.
Enumerationr/w
Enumerated Values:
1v1
2v2c
3v3
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.6
tpSnmpNotificationHostSecLev
The Security Level for the SNMP v3 User.
noAuthNoPriv(1),No authentication and no privacy security level are used.
authNoPriv(2),Only the authentication security level is used.
authPriv(3),Both the authentication and th…
Enumerationr/w
Enumerated Values:
1noAuthNoPriv
2authNoPriv
3authPriv
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.7
tpSnmpNotificationHostNtfyType
The type for the notifications.
trap(1),Indicates traps are sent.
inform(2),Indicates informs are sent. The Inform type has a higher security than the Trap type.
Enumerationr/w
Enumerated Values:
1trap
2inform
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.8
tpSnmpNotificationHostRetry
Specify the amount of times the switch resends an inform request. The switch will
resend the inform request if it doesn't get the response from the management station
during the Timeout interval, and it will terminat…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.9
tpSnmpNotificationHostTimeout
Specify the maximum time for the switch to wait for the response from the management
station before resending a request.
Its value range is 1-3600.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.10
tpSnmpNotificationHostRowStatus
The status column has three defined values:
- `active(1)', which indicates that the conceptual row is
available for using by the managed device;

- `createAndGo(4)', which is supplied by a management
s…
TPLINK-TC-MIBTPRowStatusr/w
Textual Convention: TPLINK-TC-MIBTPRowStatus Enumeration
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.32.1.1.1.1.11