TPLINK-PROTOCOL-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
9

protocolTemplateTable

table
.1.3.6.1.4.1.11863.6.16.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk protocolTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-PROTOCOL-VLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-PROTOCOL-VLAN-MIB::protocolTemplateTable' 
The Protocol Template should be created before configuring
the Protocol VLAN. By default, the switch has defined the IP
Template, ARP Template, RARP Template, etc. You can add more
Protocol Template.
templateEntry row .1.3.6.1.4.1.11863.6.16.1.1.1.1
An entry contains of the information of a protocol template.
Indexes
Column Syntax OID
templateProtocolName
Give a name for the Protocol Template,1-8 characters
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11863.6.16.1.1.1.1.1
templateEtherType
Enter the Ethernet protocol type field in the protocol template,
for example 0800,0ff0.
The value is [dsap ssap] when frame type is llc.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.11863.6.16.1.1.1.1.2
templateFrameType
 Enumerationr/w
Enumerated Values:
0ethernet8023
1ethernetII
2snap
3llc
 .1.3.6.1.4.1.11863.6.16.1.1.1.1.3
templateStatus
the following two values are states:
these values may be read or written
active(1),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
destroy(6)
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.16.1.1.1.1.4

protocolGroupTable

table
.1.3.6.1.4.1.11863.6.16.1.2.1 · 1 row entry · 5 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk protocolGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-PROTOCOL-VLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-PROTOCOL-VLAN-MIB::protocolGroupTable' 
Here you can configure the Protocol VLAN.
protocolVlanEntry row .1.3.6.1.4.1.11863.6.16.1.2.1.1
An entry contains of the information of a protocol vlan.
Indexes
Column Syntax OID
protocolName
Displays the protocol template name of the VLAN.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11863.6.16.1.2.1.1.1
protocolVlanId
Enter the ID number of the Protocol VLAN. This VLAN should
be one of the 802.1Q VLANs the ingress port belongs to,1-4094.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11863.6.16.1.2.1.1.2
protocolPriority
Enter the ID number of the Protocol VLAN. This VLAN should
be one of the 802.1Q VLANs the ingress port belongs to,1-4094.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11863.6.16.1.2.1.1.3
protocolPortMember
Protocol Vlan port member.
OctetStringr/w .1.3.6.1.4.1.11863.6.16.1.2.1.1.4
protocolVlanStatus
the following two values are states:
these values may be read or written
active(1),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
destroy(6)
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.16.1.2.1.1.5