TPLINK-PORTLOOPBACKDETECTION-MIB

        The config of loopback Detection.
    
Source file
TPLINK-PORTLOOPBACKDETECTION-MIB
Last revised
Identity
tplinkLoopbackDetectionMIB
Base OID
1.3.6.1.4.1.11863.6.80
Imported Objects
RFC1213-MIB ifIndex
SNMPv2-SMI Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC DisplayString
TPLINK-MIB tplinkMgmt
TPLINK-TC-MIB TPRowStatus
Net-SNMP examples using the tplink MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'TPLINK-PORTLOOPBACKDETECTION-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TPLINK-PORTLOOPBACKDETECTION-MIB::tplinkLoopbackDetectionMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-PORTLOOPBACKDETECTION-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-PORTLOOPBACKDETECTION-MIB::tplinkLoopbackDetectionMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (16)
tplinkLoopbackDetectionMIB.1.3.6.1.4.1.11863.6.80
.1.3.6.1.4.1.11863.6.80.1
Enumeration.1.3.6.1.4.1.11863.6.80.1.1
Integer32.1.3.6.1.4.1.11863.6.80.1.2
Integer32.1.3.6.1.4.1.11863.6.80.1.3
loopbackDetectionCtrlTable.1.3.6.1.4.1.11863.6.80.1.4
loopbackDetectionCtrlEntry.1.3.6.1.4.1.11863.6.80.1.4.1
loopbackDetectionPortOctetString.1.3.6.1.4.1.11863.6.80.1.4.1.1
Enumeration.1.3.6.1.4.1.11863.6.80.1.4.1.2
Enumeration.1.3.6.1.4.1.11863.6.80.1.4.1.3
Enumeration.1.3.6.1.4.1.11863.6.80.1.4.1.4
loopbackDetectionLoopStateOctetString.1.3.6.1.4.1.11863.6.80.1.4.1.5
loopbackDetectionBlockStateOctetString.1.3.6.1.4.1.11863.6.80.1.4.1.6
loopbackDetectionLagStateOctetString.1.3.6.1.4.1.11863.6.80.1.4.1.7
SNMPv2-SMIInteger32.1.3.6.1.4.1.11863.6.80.1.4.1.8
.1.3.6.1.4.1.11863.6.80.2
Dependencies (8) 5 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.11863.6.80.2.1
When loopbackDetection is enabled ,A loopback detection notification is sent while port loop status is changed.