TPLINK-MAC-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

macVlanConfigTable

table
.1.3.6.1.4.1.11863.6.15.1.1.1 · 1 row entry · 4 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk macVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-MAC-VLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-MAC-VLAN-MIB::macVlanConfigTable' 
MAC VLAN (Virtual Local Area Network) is the way to classify the 
VLANs based on MAC Address. A MAC address is relative to a single 
VLAN ID. The untagged packets and the priority-tagged packets coming 
from the MAC address will be tagged with this VLAN ID.
macVlanEntry row .1.3.6.1.4.1.11863.6.15.1.1.1.1
An entry contains of the information of a mac vlan.
Indexes
Column Syntax OID
macAddr
Display the MAC address.
OctetString .1.3.6.1.4.1.11863.6.15.1.1.1.1.1
macDescription
Give a description to the MAC address for identification,
1-8 characters.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11863.6.15.1.1.1.1.2
macVlanId
Enter the ID number of the MAC VLAN. This VLAN should be
one of the 802.1Q VLANs the ingress port belongs to, 1-4094
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.11863.6.15.1.1.1.1.3
macVlanStatus
the following two values are states:
these values may be read or written
active(1),
the following three values are
actions: these values may be written,
but are never read
createAndGo(4),
destroy(6)
TPLINK-TC-MIBTPRowStatusr/w
Type Values:
1active
4createAndGo
6destroy
 .1.3.6.1.4.1.11863.6.15.1.1.1.1.4

macVlanPortTable

table
.1.3.6.1.4.1.11863.6.15.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk macVlanPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-MAC-VLAN-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-MAC-VLAN-MIB::macVlanPortTable' 
Here you can enable the port for the MAC VLAN feature. 
Only the port is enabled, can the configured MAC VLAN 
take effect.
macVlanPortEntry row .1.3.6.1.4.1.11863.6.15.1.2.1.1
An entry contains of the information of a port.
Indexes
Column Syntax OID
macVlanPortNumber
The port id.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.11863.6.15.1.2.1.1.1
macVlanPortEnable
Select your desired port for MAC VLAN feature. All the ports
are disabled by default
0. Disable
1. Enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.15.1.2.1.1.2
macVlanPortLag
Displays the LAG to which the port belongs
OctetString
Constraints:
range: 0-10
 .1.3.6.1.4.1.11863.6.15.1.2.1.1.3