TPLINK-IPV6ADDR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

ipv6ParaConfigAddrTable

table
.1.3.6.1.4.1.11863.6.50.1.1 · 1 row entry · 7 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk ipv6ParaConfigAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-IPV6ADDR-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-IPV6ADDR-MIB::ipv6ParaConfigAddrTable' 
The table of address information is relevant to the
switch's IPv6 addresses.
ipv6ParaConfigAddrEntry row .1.3.6.1.4.1.11863.6.50.1.1.1
Define the IPv6 address information.
Indexes
Column Syntax OID
ipv6ParaConfigIfIndex
The IfIndex of the interface
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.50.1.1.1.1
ipv6ParaConfigIfDescription
The description of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.50.1.1.1.2
ipv6ParaConfigAddrType
The IP address type of the switch. The value must be ipv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11863.6.50.1.1.1.3
ipv6ParaConfigAddress
The IPv6 address of the switch.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11863.6.50.1.1.1.4
ipv6ParaConfigPrefixLength
The length of the prefix (in bits) associated with
the IPv6 address of the switch.
Integer32r/w
Constraints:
range: 1-128
 .1.3.6.1.4.1.11863.6.50.1.1.1.5
ipv6ParaConfigSourceType
Indicate the type of source of IPv6 address.
The value can be one of following:
'assignedIp':
Assigned global/site-local IPv6 address;
'assignedEUI64Ip':
Assigned global/site-local IPv6 address
by using EUI-64 …
Enumeration
Enumerated Values:
1assignedIp
2assignedEUI64Ip
3assignedLinklocalIp
4autoIp
5dhcpv6
6negotiate
 .1.3.6.1.4.1.11863.6.50.1.1.1.6
ipv6ParaConfigRowStatus
the following values are states:
these values may be used as follow:

active(1),if the entry is being used.
notInService(2),destory the entry.
notReady(3),destory the entry.
createAndGo(4),not being used
c…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11863.6.50.1.1.1.7

ipv6ParaConfigCfgTable

table
.1.3.6.1.4.1.11863.6.50.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk ipv6ParaConfigCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-IPV6ADDR-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-IPV6ADDR-MIB::ipv6ParaConfigCfgTable' 
The table of configuration information is relevant to the
switch's IPv6 addresses.
ipv6ParaConfigCfgEntry row .1.3.6.1.4.1.11863.6.50.1.2.1
Define the IPv6 address information.
Indexes
Column Syntax OID
ipv6ParaConfigCfgIfIndex
The IfIndex of the interface
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11863.6.50.1.2.1.1
ipv6ParaConfigCfgIfDescription
The description of the interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.11863.6.50.1.2.1.2
ipv6ParaConfigAutoLinkLocalEnable
0. disable
1. enable
Enable/Disable IPv6 link-local address auto configuration mode.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.50.1.2.1.3
ipv6ParaConfigDhcpEnable
0. disable
1. enable
Enable/Disable IPv6 global address auto configuration via DHCPv6 Server.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.50.1.2.1.4
ipv6ParaConfigNegotiateEnable
0. disable
1. enable
Enable/Disable IPv6 global address auto configuration via RA message.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.50.1.2.1.5
ipv6ParaConfigIPv6Enable
0. disable
1. enable
Enable/Disable IPv6 function on the interface of switch.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.50.1.2.1.6