TPLINK-IPV6ADDR-MIB

Monitored by Observium

        Private MIB for IPv6 address configuration.

Observium actively monitors this MIB

Observium uses this MIB in discovery or polling workflows on applicable devices.

IP addresses

Explore Observium network monitoring

Source file: TPLINK-IPV6ADDR-MIB
Last revised: 13 Dec 2015, 09:30 UTC
Identity: tplinkIpv6AddrMIB
Base OID: 1.3.6.1.4.1.11863.6.50

Imported Objects

INET-ADDRESS-MIB	InetAddress InetAddressType
SNMPv2-SMI	IpAddress OBJECT-TYPE (no object page)
SNMPv2-TC	DisplayString RowStatus
TPLINK-MIB	tplinkMgmt

Net-SNMP examples using the tplink MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'TPLINK-IPV6ADDR-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'TPLINK-IPV6ADDR-MIB::tplinkIpv6AddrMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-IPV6ADDR-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-IPV6ADDR-MIB::tplinkIpv6AddrMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (24)

tplinkIpv6AddrMIB		`.1.3.6.1.4.1.11863.6.50`
tplinkIpv6AddrMIBObjects		`.1.3.6.1.4.1.11863.6.50.1`
ipv6ParaConfigAddrTable		`.1.3.6.1.4.1.11863.6.50.1.1`
ipv6ParaConfigAddrEntry	ipv6ParaConfigIfIndexipv6ParaConfigAddrTypeipv6ParaConfigSourceTypeipv6ParaConfigAddress	`.1.3.6.1.4.1.11863.6.50.1.1.1`
ipv6ParaConfigIfIndex	Integer32	`.1.3.6.1.4.1.11863.6.50.1.1.1.1`
ipv6ParaConfigIfDescription	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11863.6.50.1.1.1.2`
ipv6ParaConfigAddrType	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.11863.6.50.1.1.1.3`
ipv6ParaConfigAddress	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.11863.6.50.1.1.1.4`
ipv6ParaConfigPrefixLength r/w	Integer32	`.1.3.6.1.4.1.11863.6.50.1.1.1.5`
ipv6ParaConfigSourceType	Enumeration	`.1.3.6.1.4.1.11863.6.50.1.1.1.6`
ipv6ParaConfigRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.11863.6.50.1.1.1.7`
ipv6ParaConfigCfgTable		`.1.3.6.1.4.1.11863.6.50.1.2`
ipv6ParaConfigCfgEntry	ipv6ParaConfigCfgIfIndex	`.1.3.6.1.4.1.11863.6.50.1.2.1`
ipv6ParaConfigCfgIfIndex	Integer32	`.1.3.6.1.4.1.11863.6.50.1.2.1.1`
ipv6ParaConfigCfgIfDescription	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11863.6.50.1.2.1.2`
ipv6ParaConfigAutoLinkLocalEnable r/w	Enumeration	`.1.3.6.1.4.1.11863.6.50.1.2.1.3`
ipv6ParaConfigDhcpEnable r/w	Enumeration	`.1.3.6.1.4.1.11863.6.50.1.2.1.4`
ipv6ParaConfigNegotiateEnable r/w	Enumeration	`.1.3.6.1.4.1.11863.6.50.1.2.1.5`
ipv6ParaConfigIPv6Enable r/w	Enumeration	`.1.3.6.1.4.1.11863.6.50.1.2.1.6`
ipv6GatewayConfig		`.1.3.6.1.4.1.11863.6.50.1.3`
ipv6Gateway r/w	OctetString	`.1.3.6.1.4.1.11863.6.50.1.3.1`
tplinkIpv6RoutingConfig		`.1.3.6.1.4.1.11863.6.50.2`
tpIpv6Routing r/w	Enumeration	`.1.3.6.1.4.1.11863.6.50.2.1`
tplinkIpv6AddrNotifications		`.1.3.6.1.4.1.11863.6.50.3`

Dependencies (5) 4 direct · 1 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

TPLINK-IPV6ADDR-MIBtplinkselected
- INET-ADDRESS-MIBrfcdefault fallback2 symbols
  - SNMPv2-SMIrfc3 symbols
  - SNMPv2-TCrfc1 symbol
    - SNMPv2-SMIrfcshared1 symbol
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols
- TPLINK-MIBtplink1 symbol
  - RFC1155-SMIrfcdefault fallback1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared1 symbol

TPLINK-IPV6ADDR-MIB

Imported Objects

Objects (24)

Dependency tree

Dependency-first compile order