TPLINK-GVRP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
7

tpGvrpPortTable

table
.1.3.6.1.4.1.11863.6.20.1.2.1 · 1 row entry · 7 columns
Open in standard view
Uses the tplink variant from /opt/observium/mibs/tplink.
Command help
Walk tpGvrpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'TPLINK-GVRP-MIB' -M '/opt/observium/mibs/tplink:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'TPLINK-GVRP-MIB::tpGvrpPortTable' 
Here you can set the GVRP parameters for each port.
tpGvrpPortEntry row .1.3.6.1.4.1.11863.6.20.1.2.1.1
An entry contains of the information of a port.
Indexes
Column Syntax OID
tpGvrpPortNumber
Displays the port number.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.1
tpGvrpPortEnable
Enable/Disable the GVRP feature for the port. The port type
should be set to TRUNK before enabling the GVRP feature.
0. Disable
1. Enable
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.2
tpGvrpPortRegistration
Select the Registration Mode for the port.
0. NORMAL:In this mode, a port can dynamically register/deregister
a VLAN and propagate the dynamic/static VLAN information.
1. FIXED:In this mode, a port cannot register/de…
Enumerationr/w
Enumerated Values:
0normal
1fixed
2forbidden
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.3
tpGvrpLeaveAllTimer
Once the LeaveAll Timer is set, the port with GVRP enabled
can send a LeaveAll message after the timer times out, so
that other GARP ports can re-register all the attribute information.
After that, the LeaveAll timer…
Integer32r/w
Constraints:
range: 1000-30000
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.4
tpGvrpJoinTimer
To guarantee the transmission of the Join messages, a GARP
port sends each Join message two times. The Join Timer is
used to define the interval between the two sending operations
of each Join message. The Join Timer…
Integer32r/w
Constraints:
range: 20-1000
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.5
tpGvrpLeaveTimer
Once the Leave Timer is set, the GARP port receiving a
Leave message will start its Leave timer, and unregister
the attribute information if it does not receive a Join
message again before the timer times out. The Le…
Integer32r/w
Constraints:
range: 60-3000
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.6
tpGvrpPortLag
Displays the LAG to which the port belongs.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.11863.6.20.1.2.1.1.7